Tag

V4

Browsing

For the 2015 model year, the Honda VFR800X Crossrunner is getting a massive update from Big Red. As such, the 800cc V4 engine on the Crossrunner sees more horsepower (104.6 peak) and more mid-range torque added, new design aesthetics, longer suspension (+25mm) , and new wheels and brakes also get updates for 2015.

Other highlights for the 2015 Honda VFR800X Crossrunner include Honda’s Selectable Torque Control system (HTSC), ABS brakes, full LED lighting, self-cancelling indicators, and heated grips, which Honda hopes will help ADV buyers consider the Japanese brand.

With these changes, the 2015 Honda Crossrunner pushes further into the adventure side of the touring equation, making the Crossrunner an attractive sport/ADV model from Honda.

Speaking to Speedweek, KTM CEO Stefan Pierer announced that the Austrian company will be entering the MotoGP World Championship in 2017. KTM will race with a brand new machine that features a V4 engine and will be called the KTM RC16.

Pierer said that KTM will debut the V4 engine in May of 2015, and begin testing and developing the RC16 later that year — KTM may even wild-card the race bike during the 2016 season. Perhaps the biggest news though is that KTM plans to produce up to 100 units of the KTM RC16 race bike, which will be available to the public for a cool €150,000 to €200,000 (likely in the same way privateers can purchase a lower-spec machine than KTM’s Moto3 racer).

After teasing us what looked like a direct knock-off of Valentino Rossi’s NSR500 two-stroke GP bike, complete with vague #46 references, the German project has finally taken the wraps off its Ronax 500 GP street bike.

Making 160hp (@ 11,500 rpm) from its nearly square (54.5 x 54 bore and stroke) 500cc V4 engine, the Ronax 500 also boasts two counter-rotating crankshafts inside its all-aluminum engine block.

Fuel-injected for more rideability, Ronax has programmed the Ronax 500 with a sport and rain ignition map. Upgrading the class GP bike design with modern components, an electric starter and four carbon/kevlar mufflers are part of the Ronax 500’s highlights, while carbon fiber fairings, Öhlins suspension, and Brembo brakes complete the package.

The folks at Ronax are certainly getting away with not saying much, especially when it comes to their soon-to-be-released Ronax 500 motorcycle. Dressed in a neon yellow cover, limited to only 46 units, and looking suspiciously similar thru the sheet to a Honda NSR500, what Ronax isn’t saying is that its creation is a replica of Valentino Rossi’s last two-stroke race bike (the Honda NSR500), but they are certainly doing everything in their power to convey that very fact.

Since the dawn of the four-stroke era of Grand Prix racing, many old-school GP fans have been left wanting the days of 500cc two-stroke machines, which were known for their razor-thin power bands, lack of electronics, and propensity to launch riders into low-Earth orbit.

The last man to win a GP championship on a 500cc two-stroke machine, Valentino Rossi is of course a crowd favorite – and using his name and history, without actually using it, is a clever (though modestly unethical) way of selling some bikes.

Before Ducati’s monocoque chassis design was all the rage in superbike design, the folks at Honda were busy toying with the same idea.

Outlining a patent in 2006 for a motorcycle whose engine would be fully utilized as a part of the chassis, Honda’s design, which differs in minutiae, predates Ducati’s patent by almost a year and a half.

A noticeable departure from Honda’s MotoGP design, one can argue whether Honda’s monocoque chassis was destined for the next iteration of the CBR1000RR or the next generation VFR at the time of its conception.

Honda’s road-going V4 superbike project has seemingly stalled, for the umptenth time in the past decade. While the bike has been rumored for years, the project just a year and a half ago was confirmed by Honda CEO Takanobu Ito.

Since that confirmation, the project’s delivery time has been pushed back, thought the Japanese motorcycle manufacturer has committed itself to building the MotoGP-inspired road bike.

With reports speculating on a possible price tag well into the six-figure range, the rumormill is on the rev limiter regarding this superbike, so if there is one thing we actually know about the machine, it is that we don’t actually know much about it.

A 1,000cc displacement is of course expected, along with a four-cylinder v-angle cylinder configuration. If we can presume a setup similar to what is found on the Honda RC213V MotoGP race bike, then make that a 90° cylinder head arrangement.

If we had really been on the ball though, we likely could have told you all this, six months ahead of Ito’s confirmation, as patent documents discovered by Spanish magazine SoloMoto shows the V4 superbike engine in line-drawing form, from as early as March 2012.

Good news folks, the legendary Honda VFR 800 is returning to US and Canadian shores after a nearly five-year hiatus. If you were disappointed when Honda didn’t confirm the VFR 800 for North America back in November at EICMA, take heart, it’s on its way.

Since 1998, the Honda VFR 800 has combined the seductive power delivery of a V4 with subdued styling, comfy ergos, all-day practicality and bulletproof Honda reliability.

Sure, it doesn’t have the sex appeal of a Ducati 1199 Panigale or the rough-and-tumble attitude of a KTM 1190 Adventure, but what it does have is probably the best blend of comfort, performance and practicality for riders who consider a motorcycle to be their primarily form of transportation.

That the Honda CBR1000RR Fireblade is getting a little long in the tooth has been obvious for several years now. And that Honda is planning a very special V4 sportsbike to take the Fireblade’s place on the World Superbike grid has also been broadly mooted for the past couple of years.

The existence of the V4 1000 was first publicly acknowledged by Honda president Takanobu Ito, who spoke openly about the bike at the end of 2012.

Since then, there have been constant rumors that the new Honda superbike was to be introduced at EICMA in Milan this coming November. So persistent had the rumors become that Honda Italia last week was forced to issue a denial, sending out a press release to the Italian media insisting that the bike will not be introduced at the EICMA this November.

Now 167 hp strong, those crazy Italians in Noale are upgrading there already stout Aprilia Tuono V4 R APRC for the 2014 model year, and for bonus points are adding an ABS package along with those extra ponies on the streetfighter’s peak horsepower figure.

Integrating the Bosch 9MP dual-channel ABS package, which is mated to Brembo M432 brake calipers up-front, Aprilia has made the 2014 Aprilia Tuono V4 R  a bit more stable while braking on questionable road conditions — keeping the bike inline with its competitors.

With a bevy of changes coming to the Tuono’s 999.6cc V4 power plant to boost power, we also see that Aprilia has included its second-generation APRC electronics package to the motorcycle, making it easily the most tech-savvy machine in its category.

Other changes include also a larger fuel tank (4.9 gallons), and a new seat for better street performance and ergonomics. It’s not clear if Aprilia USA will price the 2014 Aprilia Tuono V4 R at its previous $14,999 MSRP, or will continue its aggressive pricing at $13,999, like the company has done with the 2013 models.

At Assen, Ducati MotoGP Project Director Paolo Ciabatti revealed that they too will be offering bikes for non-MSMA teams in 2014. While Honda is selling a simplified production racer version of the RC213V, and Yamaha is to lease M1 engines, the package Ducati is offering could turn out to be very interesting indeed.

Instead of producing a separate machine, Ducati will be offering the 2013 version of the Desmosedici to private teams, to be entered as non-MSMA entries, and using the spec-electronics hardware and software package provided by Magneti Marelli.

Although the current 2013 machine is still far from competitive – at Assen, the two factory Ducatis finished 33 seconds behind the winner Valentino Rossi, and behind the Aprilia ART machine – the special conditions allowed for non-MSMA entries make the Desmosedici a much more interesting proposition.

Just over 18 months ago, I wrote a long analysis of what I believed at the time was the main problem with Ducati’s Desmosedici MotoGP machine. In that analysis, I attributed most of the problems with the Desmosedici to the chosen angle of the V, the angle between the front and rear cylinder banks.

By sticking with the 90° V, I argued, Ducati were creating problems with packaging and mass centralization, which made it almost impossible to get the balance of the Desmosedici right. The engine was taking up too much space, and limiting their ability to adjust the weight balance by moving the engine around.

Though there was a certain logic to my analysis, it appears that the engine angle was not the problem. Yesterday, in their biweekly print edition, the Spanish magazine Solo Moto published an article by Neil Spalding, who had finally obtained photographic evidence that the Honda RC213V uses a 90° V, the same engine angle employed by the Ducati Desmosedici. Given the clear success of the Honda RC213V, there can no longer be any doubt that using a 90° V is no impediment to building a competitive MotoGP machine.

The photographic proof comes as confirmation of rumors which had been doing the rounds in the MotoGP paddock throughout the second half of the 2012 season. Several people suggested that the Honda may use a 90° angle, including Ducati team manager Vitto Guareschi, speaking to GPOne.com back in November.

I had personally been lucky enough to catch a glimpse of a naked RC213V engine at one rain-soaked race track in September, but while the glimpse through the window may have been good enough to form the impression of an engine that looked like it may have been a 90°V, it was a very long way from being anything resembling conclusive, and nowhere near enough to base a news story on.

Spalding’s persistence has paid off, however. The British photographer and journalist is a common sight wandering among the garages, either first thing in the morning, as the bikes are being warmed up, or late at night, while the mechanics prepare the machines for the following day.

At some point, the Honda mechanics and engineers – protective to the point of prudishness of displaying any part of their machine to the outside world – would let their guard slip. When they did, Spalding pounced.

So why did Honda elect to use an engine layout which is blamed for causing Ducati so much trouble? And how does Honda make the layout work where Ducati have continued to fail? The first question is relatively simple to answer; the second is a good deal more tricky.