Two New Ducati Scramblers Spotted in CARB Docs?

More new model news, as filings with the California Air Resources Board (CARB) suggest that we will see two new Scrambler models debuting, later this year. We come to this conclusion because emissions papers from CARB state that “Scrambler CR” and “Scrambler DS” models are coming from Ducati for 2017, in addition to the models we already have from the Italian manufacturer. The two-letter designations imply that we are likely to see a café racer (CR) version of the Ducati Scrambler, as well as a dual-sport (DS) version of the machine, which we have already seen in spy photos. This news isn’t surprising, since Ducati has made no secret about its desire to expand the Scrambler lineup.

New Four-Cylinder MV Agusta Brutale Debuting at EICMA

You know the new-bike season is just around the corner, because we’re starting to get glimpses of what the motorcycle OEMs will debut at shows like INTERMOT and EICMA. We’ve already had a glimpse of the 2017 Honda CBR1000RR, as well as the 2017 BMW S1000R, and if the folks at Italian motorcycle magazine Motociclismo are correct, the following is a concept sketch of the four-cylinder 2017 MV Agusta Brutale. The new Brutale is one of two new bikes that MV Agusta will launch at the EICMA show, with the other machine pegged as a special edition three-cylinder model. To be up front, we don’t expect anything too crazy from MV Agusta for the 2017 model year, with the Italian company still limited in options by its financial situation.

Spotted: The Subtly Changed 2017 BMW S1000R

Thanks to our loyal readers, we were pointed in the direction of some photos of what looks like a pre-production version of the upcoming 2017 BMW S1000R streetfighter (one of the machines we tipped for an update this coming model year). It appears that the new BMW S1000R is going to get a bevy of changes already found on the current BMW S1000RR superbike, both visually and mechanically. Caught at the Oschersleben track in Germany, we can’t imagine how many people walked by this parked motorcycle, without realizing what it was. We can’t blame them though, because the updates coming to the 2017 BMW S1000R are subtle, and you’d really have to know what you’re looking at, in order to see the changes.

More of the Sexiness That Is the KTM Moto2 Race Bike

KTM’s Moto2 project officially debuted today, with Aki Ajo managing the team that will consist of riders Brad Binder and Miguel Oliveira. Like KTM’s MotoGP project, with the KTM RC16 race bike, the Moto2 project uses some intriguing elements. Namely, the frame is of a steel trellis design, the suspension is provided for by WP, and of course the engine is a lightly tuned Honda CBR600RR lump. If looks could win races, the WP KTM Moto2 machine would already be a contender. That being said, we have high expectations for the racing program in next year’s Moto2 Championship. Until then tough, we’ll let you drool over the high-resolution images we have waiting for you, after the jump.

Hi, Are You the 2017 Honda CBR1000RR?

If you were hoping that the 2017 Honda CBR1000RR would be a completely new machine for sport bike enthusiasts, the following might disappoint you. This is because photos published on Twitter seem to suggest that the 2017 Honda Fireblade will get mostly cosmetic changes for the upcoming model year. As you can see after the jump, what looks like the new CBR1000RR was caught lapping for what appears to be a PR video spot for the Japanese OEM. While it is clear from these shots that the pictured Honda CBR1000RR has a radically new fairing design, a closer comparison to the chassis (see above) suggests that the machine is simply the current generation machine, with new clothing.

Official: KTM Enters Moto2 with Binder and Oliveira

KTM is to enter the Moto2 class. The Ajo team is to expand its current Moto2 operation to two riders, with Brad Binder and Miguel Oliveira (not Tom Lüthi, as we had previously reported) taking the place of the departing Johann Zarco. The team is also to switch from Kalex to KTM, as part of KTM’s project to provide a career path for young riders from the FIM CEV Moto3 championship through all three Grand Prix classes to MotoGP. The names of the riders involved should come as no surprise. Brad Binder is a race or two away at most from becoming the 2016 Moto3 world champion, and Miguel Oliveira came very close to winning the Moto3 title in 2015, as Binder’s teammate in the Red Bull KTM Ajo Moto3 team. Both riders are highly rated both by KTM and by team boss Aki Ajo.

MotoGP Aerodynamic Rules Published, No Wings Allowed

The aerodynamic rules for the 2017 MotoGP season and beyond have been published. At a meeting of the Grand Prix Commission at Misano, a proposal from Dorna’s technical team was accepted, banning aerodynamic devices in as general a wording as possible. Wings, bulges, and anything protruding from the front of the fairing are now banned. The proposal was drawn up by a small group consisting of Director of Technology Corrado Cecchinelli, Technical Director Danny Aldridge, and Race Director Mike Webb. Their main focus was to keep the wording as general as possible, so as to avoid loopholes for engineers to exploit. Technical Director Danny Aldridge will have the final word on any fairing protrusion, precisely to prevent any doubt about workarounds.

Two New BMW Models Debuting a INTERMOT

Every other year, the motorcycle industry gathers in Cologne, Germany in October, for the INTERMOT trade expo. The show provides a good alternative for the Germanic brands to launch new machines, with BMW and KTM often showcasing new models at the show. This year will be no different. To that end, BMW Motorrad is already getting its hype machine warmed up, telling us that several models will debut updates in Cologne. More importantly, zie Germans tell us that two new motorcycles will also debut at the INTERMOT show. What those models will be is certainly the conjecture du jour, since there are several possibilities that BMW Motorrad could be working on. This might make decoding BMW’s game plan all but impossible, but we can still give it a try.

#RideHVMC Freeman Racing Pays Tribute to the FDNY

This weekend is the final round of the MotoAmerica Championship, being held at the New Jersey Motorsports Park. This weekend also marks the 15th anniversary of the September 11th attacks on the World Trade Center, The Pentagon, and United Airlines Flight 93. We all know the sacrifices that were made by New York’s first responders, though admittedly sometimes we take those sacrifices for granted. The sacrifice hasn’t been lost on the #RideHVMC Freeman Racing Ducati team though, who are based out of Ossining, New York. As such, Corey Alexander and the #RideHVMC Freeman Racing Ducati Panigale R will be wearing a special livery that commemorates the men and women of the New York City Fire Department. As you will see in the photos after the jump, “Engine 23” is a fetching motorcycle, with a touching message.

Not-A-Review: Alta Motors Redshift MX

For a long time now, Asphalt & Rubber has been following the progress of Alta Motors (formerly BRD Motorcycles), as they have worked to make a lites-class comparable electric motorcycle. With the Redshift MX motocross and Redshift SM supermoto bikes now shipping from the company’s San Francisco facility, the motorcycle community can finally see in the flesh what I have been calling one of the most competent electric motorcycles yet produced. I was impressed with the Redshift SM prototype that I rode back in 2009, and the finalized form of the Redshift has only matured further from its strong start. I don’t want you simply to take my biased word for it though, so for today’s post, I have enlisted the help of my Two Enthusiasts Podcast co-host, Quentin Wilson.

What If You Put Dustbin Fairings on Modern Sport Bikes?

10/14/2014 @ 4:30 pm, by Jensen Beeler18 COMMENTS

ducati-panigale-dustbin-racer-nicolas-petit

I simply love the latest sketches from Nicolas Petit. The French designer is sort of re-imaging a previous project of his, where he designed a modern-looking dustbin-style fairing for a BMW HP2 Sport and Moto Guzzi V12 Le Mans.

Taking on now the Ducati 1199 Panigale, Petit has mixed the old-styled TT racer look with Italy’s premier superbike, in an effective manner. We haven’t seen this sort of clash between old and new technology since John Hopkins raced the last two-stroke GP bike, the Yamaha YZR500 in 2002.

Upcoming BMW S1000F Rendered by Nicolas Petit

07/02/2014 @ 6:13 pm, by Jensen Beeler22 COMMENTS

wunderlich-bmw-s1000f-nicolas-petit

Once again the folks at Wunderlich are readying themselves for another BMW model, and the German company has enlisted the services of French designer Nicolas Petit to render the upcoming BMW S1000F sport-tourer, which we are all eagerly awaiting.

Based off the BMW S1000RR sport bike, the S1000F features an upright handlebar design with a more touring-oriented sitting position, to make for better long-road travel. It’s not clear if BMW will follow the lead of Erik Buell Racing, and choose not to detune its superbike engine, but it does seem that BMW wants a bigger piece for the sporty end of the touring market.

BMW K1600GT Hybrid 3-Wheeler Concept by Nicolas Petit

07/05/2013 @ 2:29 pm, by Jensen Beeler7 COMMENTS

BMW-K1600GT-3-Wheeler-Nicolas Petit-01

Here at Asphalt & Rubber, we love the work of French designer Nicolas Petit — his Honda VTR1200 concept remains one of out all-time favorite concepts, and spurred me to think long and hard about the potential that the Japanese manufacturers could have in the two-wheel industry. Today’s post though, isn’t about a two-wheeler…it’s about a three-wheeler.

Pretty much the coolest trike we have ever seen imagined, Petit has once again inked a design for consumption, which features Bavaria’s favorite brand: BMW. Taking the 1.6L six-cylinder engine from the BMW K1600GT/GTL, Petit has mated a very recognizable front-end to his creation. The ultimate driving machine? We wouldn’t mind taking one for a spin around our local track.

What Goes into a Motorcycle Concept Sketch?

05/02/2013 @ 3:58 pm, by Jensen BeelerComments Off on What Goes into a Motorcycle Concept Sketch?

bmw-wunderlisch-concept-nicolas-petit

We have already covered designer Nicolas Petit’s time-lapse video, which shows the 20-minute process of drawing out a motorcycle concept sketch. But what goes into envisioning a concept like the Wunderlich BMW R1200S in the first place? Well, Petit has a video for that as well.

Any interesting perspective on how the French designer takes a BMW R1200GS Adventure, turns it into a boxer-twin sport bike, and then a streetfighter, it is always facinating to see the process behind a person’s art. And if you’re thinking, “man, I wish they’d build that bike!” You’re not alone in that thought.

How Long Does it Take You to Draw a Motorcycle?

03/04/2013 @ 4:46 pm, by Jensen Beeler5 COMMENTS

Nicolas-Petit-HP2-Megamoto-LC-Concept

We spend a bit of our time here at Asphalt & Rubber featuring the work of Nicolas Petit, and other designers, sharing with you the unique visions that these artists create. Some of their work comes to fruition in three dimensions, and some of it remains in a two-dimensional form, but it is all still pretty damn impressive. But what goes into these sketches and renders?

Working on his BMW HP2 Megamoto LC Concept, Petit has condensed his 20-minute sketching routine, and put together a short three-minute time-lapse video of his work. Armed with only with a couple pens and markers, Petit makes short-work of the sketch, though we can only imagine how many hours of studying design had to come together before pen could be put to paper. Check it out after the jump.

BMW R12 Concept by Nicolas Petit Motorcycle Crèation

07/11/2012 @ 5:10 pm, by Jensen Beeler8 COMMENTS

The work of designer Nicolas Petit is one of those gems in motorcycling that really gets our imagination here at A&R working at high-speed. It probably has something to with Petit’s simple, practical, but stunning designs that grab our fancy, and make us think “yeah, I could see one of those in my garage” — such is the case with the BMW R12 concept.

A clean and modern café racer design, Nicolas Petit’s BMW R12, which is based off the BMW HP2, is something we’d like to have in our stable for when the journey, not the destination, is the order of the day. Enjoy his sketches and renders after the jump, and to save you the trouble when you go scavenging for boxer-twins, here’s a link to craigslist.