Report: Honda RC213V-S Priced at ¥20 Million

According to a report made by The Asahi Shimbun, Japan’s second largest daily newspaper, Honda has green-lit the RC213V-S project, with a price tag of 20 million yen — roughly $170,000 USD. The Honda RC213V-S debuted at the 2014 EICMA show, and was as advertised: a MotoGP race bike with lights and mirrors added to it. Honda teased show-goers and the media by say that the RC213V-S model was only a prototype, adding more fuel to the speculation regarding whether the Japanese firm would actually produce the long-awaited model. Since its inception, price figures have been rumored and banded about, almost all of which were in the six-figure category.

Polaris Acquires Electric Motorcycle Business from Brammo

Polaris Industries has acquired the electric motorcycle business from Brammo, Inc. Polaris is also acting as a leading investor in the recapitalization of Brammo, which will enable Brammo to focus exclusively on the design, development, and integration of electric vehicle powertrains. This means that Polaris will takeover building electric motorcycles at its Spirit Lake, IA production facility, and that Brammo will continue developing EV powertrains for Polaris and other OEM partners. According to its press release, Polaris will start production of electric motorcycles in the second half of 2015.

Ducati Sets Sales Record for 2014 – 45,100 Bikes Sold

Ducati Motor Holding is reporting another record sales year, and that the Italian motorcycle manufacturer sold 45,100 bikes in 2014. This marks the fifth year in a row that Ducati has shown sales growth, and it’s the third year in a row that the sales figures have been an all-time record for the Italian brand. Sales for 2014 were up 2% over 2013, with the USA again leading as Ducati’s most important market (8,804 units sold in the USA). Unsurprisingly, the Asian market is growing quickly for Ducati as well, up 11% in 2014. Ducati attributes its sales growth in-part to its new water cooler Monster line, where the Ducati Monster 1200 and Ducati Monster 821 helped raise Monster sales by 31%, with 16,409 new bikes sold in 2014.

Newspeak: The Advent of the “Adventure-Sport”

In the past decade the ADV segment has been a confusing amalgamation of differing interests, and over that time-period, two distinct groups have boiled to the surface. First there are the “Long Way Round” hopefuls, who invariably own a BMW R1200GS/A, and seem to be on some sort of perpetual preparation for an African safari. More recently, a second group has appeared: those riders who look to these big ADV bikes as more versatile Sport-Touring machines. All these riders, and their bikes, have been wedged into a single “Adventure” category, and it has created a bit of confusion for the segment. So, I want to introduce the concept of the “Adventure-Sport” and how it differentiates from the previous “Adventure-Touring” category.

MotoGP: Ducati’s Desmosedici GP15 Officially Delayed

As had been widely expected, Ducati will not have the GP15 ready for the first test at Sepang, in early February. In an interview with the MotoGP.com website, due to be shown on 19th January, Ducati Corse boss confirmed that work was still underway on the all-new bike; and that instead, Ducati will be bringing an uprated version of last year’s bike, dubbed the GP14.3, to test aspects of the new design not requiring the new engine. The delays have been trailed by both Dall’Igna and Paolo Ciabatti, speaking to the media at the Valencia test and at the Superprestigio dirt track event in December. The GP15 is a completely new bike, designed from the ground up, with a completely redesigned engine.

1972 Honda CB500, 3D Printed to Life Size

We’ve talked a bit before about the virtues of 3D printing, and how this increasingly affordable technology could change the consumer landscape as far as how we buy basic parts in the motorcycle industry. For as practical as how 3D printing, or rapid prototyping, can be, it can also be beautiful and used for art. This story is sort of a merger of those two ideas. Jonathan Brand has hoped to buy a 1972 Honda CB500 motorcycle, but the birth of his son changed that plan. Where there is a will though, there is a way, and Brand came up with the next best thing — he built a life-size model of a CB500 with his 3D printer.

Mercedes CEO: No Further Acquisition of MV Agusta

Italians are rejoicing over the news that Mercedes-Benz CEO Dieter Zetsche has made it clear that the German car manufacturer is not interested in acquiring more of MV Agusta’s private stock. Loyal readers will remember that Mercedes-AMG purchased 25% of MV Agusta last October, for a rumored €30 million — echoing the move Audi made in Ducati. Talking at the North American International Auto Show in Detroit though, Zetsche said “however, to avoid what happened with Ducati we point out that we have no intention to take over the business or produce motorcycles. MV Agusta can do it better than us.”

Triumph Has Its Best Sales Year Since Its Rebirth

Good news for Triumph Motorcycles fans, as the British motorcycle marque is reporting a banner year for 2014 — with 54,432 units sold worldwide. That figure is up 4% over 2013’s sales figure of 52,089 units, which was the first time that Triumph broke the 50,000 unit mark since the company’s rebirth in 1984. Helping Triumph reach this new high-water mark was the company’s home market, where Triumph accounted for one-in-five motorcycles sold in the UK (over 500cc). Overall, Triumph saw 8% growth in the UK, as modest growth considering the British market was up roughly 10% last year. The news is not all good, however. Triumph previously reported that financial figures for the first-half of 2014 were down, with revenue down £364 million from £369 million, and net income at a loss of £8 million.

Husqvarna 401 Concepts Will Be 2017 Production Models

One of the more intriguing things to come out of the 2014 EICMA motorcycle show in Milan were Husqvarna’s two “401” concepts, the Vitpilen and Svartpilen. The café-styled bikes are based off the KTM 390 Duke platform, though you wouldn’t know it from looking at them. Husqvarna said at EICMA that if there was sufficient interest, the Vitpilen and Svartpilen could go into production. With an overwhelming critical response from the press and fans, it should come no surprise then that our friends at Bike.se are reporting that Husqvarna intends to make the small-displacement machines a part of its 2017 model lineup.

Ducati Desmosedici Cucciolo Concept by Alex Garoli

Imagine if you will that the first Ducati, the Ducati Cucciolo, and the most modern Ducati, the Ducati Desmosedici, had a child — what would it look like? That far-fetched question nagged Mexican designer Alex Garoli, so he decided to build a concept of the machine. At the core of the Ducati Desmosedici Cucciolo is the V4 powerplant of Italy’s MotoGP race bike, and around it Garoli has imagined a modern steel trellis frame that mimics the bicycle frame look of the post-WWII motorized bicycles that pulled Italy out of deep recession. Of course the most interesting thing about Garoli’s concept is the fact that it’s a ~12:1 scale model. The work is pretty exquisite, even if you don’t agree with the concept’s ethos.

More Photos of the Roland Sands Design Ducati Diavel

10/17/2010 @ 11:16 pm, by Jensen Beeler18 COMMENTS

Our good friends at Ducati News Today have released more photos of the Ducati Diavel that Roland Sands built at his Southern California shop. While this photo is RSD’s take on how the Diavel should look, Roland and his crew have made a variety of accessories and OEM parts that Ducati will carry for the Diavel when it officially launches.

You’re not likely to hear Ducati brass tout the fact though, as they’ve tried to distance themselves from Roland Sand Design’s involvement — a misstep in our opinion. If anyone can connect the stodgy custom chopper market to a more hip and younger motorcycling audience, it’s Roland Sands Design, and Ducati could do well to associate themselves with the talent surrounding that firm. After all Roland Sands Design is really the only link in the US market that exists between the sport bike and cruiser markets.

First Official Photos of the 2011 Ducati Diavel – Traction Control, ABS, Multiple Driving Modes, & 456lbs

10/12/2010 @ 9:11 am, by Jensen Beeler31 COMMENTS

UPDATE: Ducati USA just sent us a larger version of the photo posted on Facebook (enhanced version above). Check out the key entry for the trunk under the tail, and how the tail lights extend past the tail section to function as turn signals as well.

Ducati has just released the first official images of the 2011 Ducati Diavel on its website and Facebook page, thus beginning the teasing process as we lead up to the EICMA show in Milan in three weeks (and confirming the name Diavel in the process). Showing the ass end of the power cruiser, we get our first good glimpse of the carbon tank on the Diavel (rumors are the Ducati Diavel will come in two trim levels). Ducati has also announced that the Diavel will sport ABS, Ducati Traction Contorl, multiple riding modes, and weigh 456lbs.

Ducati has also confirmed that the 2011 Ducati Diavel will use the Testastretta 11° engine found on the 2010 Ducati Multistrada 1200, but has coyly made no mention of power figures, leading us to take an educated guess that the “Devil” makes a bit more power than its sport-touring cousin.

Smaller details are starting to come out as well, as we see the frame will get some red paint (as inked-in earlier), along with a central racing stripe down the tank and tail. We’ve brightened up the close-up photo after the jump, but don’t expect to see anything more than some pieces from the Ducati parts bin.

The Ducati Diavel That Roland Sands Design Built

10/11/2010 @ 1:07 am, by Jensen Beeler12 COMMENTS

Sometimes if you want to know where something is going, it helps to know where it’s been. That seems to be the case as Ducati News Today has esnagged some photos 2011 Ducati Diavel from way back in May of last year. Caught in the United States being fitted with a new swingarm (according to DNT), this version of the Ducati Diavel shows some interesting lines that depart from the photos we’ve seen earlier of the performance cruiser.

But why does this Diavel look so different from the clay models and spy shots we’ve seen? While some will say it’s an earlier model, our eagle eye spots a few parts from the Roland Sands Design parts bin. When we saw the latest spy shots of the Diavel, the bike had some wheels on it that screamed influences from Performance Machines. It’s no secret that PM and RSD have close ties, so we went digging, and our sources tell us that Roland Sands Design has been helping Ducati kit the Diavel with aftermarket parts (note the Öhlins shock which will surely be a Ducati Performance part for the Diavel). More info and photos after the jump.

Ducati Diavel: Closer…closer…

10/07/2010 @ 9:27 am, by Jensen Beeler25 COMMENTS

The folks over at MotoBlog.it have gotten their hands on a new 2011 Ducati Diavel photo, and were kind enough to ink in a red frame and racing stripe on the bike, to give us a better idea of what the production Italian performance cruiser could look like. With the final lines showing more fit and finish, the Diavel has really transformed before our eyes these past months. The swept back headlight design reminds us of something old and something new, but we’re still not in love with this bike yet (but we’re getting there). How about you?

Source: MotoBlog.it

Spy Shots: Ducati Diavel Gets A Little Bit More Refined – No Pillion Available?

09/20/2010 @ 5:13 am, by Jensen Beeler20 COMMENTS

UPDATE: Photos of the rear do seem to confirm that passenger pegs exist and fold underneath the tail section.

British magazine website Visordown has snagged the latest Ducati Diavel spy shots, showing the Italian power cruiser with a bit more fit & finish than has previously been seen in other photos. While the tank and headlight still have some camouflage covering them, we get an especially clearer look at the Diavel’s left-hand side, which looks to be production ready.

Showing a unique trellis frame by Ducati standards, the Diavel also has a very pronounced “chin” fairing that likely helps draw air onto a lower radiator. Covering the top radiator appears to be another fairing the features gill slits, again likely for drawing air-flow through the whole of the bike.

Perhaps the biggest revelation to come from looking at these new photos, is the noticeable absence of a pillion and passenger footpegs, which brings up the question as to whether the Ducati Diavel will be a single-rider ride. You make the call in the photos after the jump.

How the Ducati Diavel Will Look Tipped Over

09/03/2010 @ 1:36 pm, by Jensen Beeler7 COMMENTS

The latest leak from Bologna shows how the upcoming Ducati power cruiser will look tipped over on its side, after an owner gets hit by car, or fails to get the kick stand down in time. Snarkiness aside, reports from the Italian news site Romagna NOI say the Diavel test rider was struck by a car while testing the bike.

The rider seems to be ok, and the bike looks to have held up quite well all things considered. One thing we can glean from the photo is the two-tone paint on the headlight cowling, which might help break up what were expecting to be a very ugly line.

Ducati Trademarks “Diavel” Name in the UK

08/25/2010 @ 8:48 am, by Jensen Beeler17 COMMENTS

documents

Ducati has recieved a trademark with the UK Intellectual Property Office for the Bolognese word for devil, or “Diavel”, which according to MCN is to be the name of the company’s new performance cruiser.

Interestingly enough, Ducati has not trademarked the Diavel name with the United States Patent & Trademarks Office (USPTO). However with the British government, Ducati has reserved the Diavel mark for virtually every use possible, including lifestyle items like shirts, perfume, watches, and our personal favorite: skin cleansing lotions and creams.

A Better Look at the Ducati Mega Monster

07/21/2010 @ 1:47 pm, by Jensen Beeler37 COMMENTS

Italian news site MotoSprint has stumbled upon perhaps the best photo yet of the new Ducati power cruiser, which has been dubbed the “Mega Monster”. From the side we can get a better glimpse on the bike’s overall lines and stature, which at leasts makes us more comfortable with how the bike’s final aesthetic will come to be. Love it or hate it? Let us know in the comments.

Source: MotoSprint via Ducati News Today

Ducati Mega Monster Spotted Again – Some Things Can’t be Unseen

07/15/2010 @ 8:26 am, by Jensen Beeler12 COMMENTS

Spotted just outside Ducati’s Bologna factory by an amateur photographer, we now get a proper glimpse of Ducati’s “Mega Monster” performance cruiser. Based around a 1200cc v-twin motor, Ducati is hoping to tap into the American dominated cruiser market, and steal a few customers away from Harley-Davidson.

While, we’re not calling the Mega Monster a “butter face”…well…actually we are, hopefully the Rhinoplasty Fairy will come visit the bike before its debut at EICMA later this year. Ducati, for the love of God, please re-think this motorcycle. Check Motociclismo.it for more photos.

Source: Motociclismo.it

Ducati Mega-Monster Spy Shots

06/29/2010 @ 6:16 am, by Jensen Beeler22 COMMENTS

MotoBlog.it has snagged some spy shots of the rumored Ducati power cruiser, or Mega-Monster as it’s now being called in the press (the Ducati Vyper nomenclature has seemingly been dropped). Aimed to take on Yamaha V-Max and it’s crew, the Mega-Monster is a big step for Ducati in tackling new market segments.

Taking a page from the Multistrada 1200 campaign, which saw a plethora of “leaked” images, we don’t really know if you can call these photos true “spy shots”. As with that release, these photos are clearly being staged by Ducati PR people, and then being leaked to motorcycle magazines.

With each rider clearly wearing Ducati apparel, the dots are being connected for us as we can see that the Bologna brand has indeed been working on a cruiser-styled bike, despite saying the project was canned last year. Photos and more after the jump.