Tag

render

Browsing

To build the Husqvarna Nuda 900, the Swedish brand started with the 798cc motor from the BMW F800 series, and then bored and stroked the parallel-twin motor to a 898cc displacement. Through its marketing of the Nuda 900 & Nuda 900R, BMW has been sure to include itself, making sure that the connection of BMW’s trusted road-going heritage is tied to the previously dirt-only brand of Husqvarna. It’s been an interesting process for both brands to say the least, the product of which we haven’t even begun to fully realize.

Taking a reversal on the process between BMW and Husqvarna, our friend Luca Bar (check out his site here) is back with another concept bike. Designing what he calls a BMW F900S, Luca has taken the F800S aesthetic and imagined it with the newly-revised 900cc motor from the Husqvarna Nuda. Not stopping just at the revised motor though, his F900S also gets some trellis-frame love, which the Nuda used in lieu of the F800’s twin-spar frame design. Adding in some updated bodywork, the total package looks very clean. More photos after the jump.

We seem to be on a kick lately with 3D renders of the underpinning parts of the Ducati 1199 Panigale. While we’ve already seen the Panigale’s “frameless” chassis detailed in computer renders, today we have a video Ducati’s Superquadro motor. Starting from an exploded point-of-view, the 195hp / 98 lbs•ft of torque v-twin motor re-assembles itself, showing how the most powerful engine from Ducati comes together for its final form.

With a hybrid chain/gear-driven camshaft, titanium valves, a wet slipper clutch, ride-by-wire throttle actuation, rider-selectable “riding mode” system, and 15,000 mile major service intervals, the Superquadro is a major step for Ducati with its Superbike motor design. Add in the first full-LED headlight on a produciton motorcycle, the first electronically-adjustable suspension on a sport bike, the first motorcycle engine braking control system, as well as the first GPS-assisted data acquisition system for a production motorcycle, and ABS brakes as a standard equipment, and you’ve got one potent two-wheeled machine.

Our friend Luca Bar did these renders for Infomotori that shed some light on what the 2012 BMW R1200GS could look like once the German manufacturer takes the duct tape and camouflage off the water-cooled boxer-twin adventure bike. With emission standards putting increased pressure on air-cooled motors, and the adventure bike segment becoming more competitive, BMW has finally had to tinker with the good thing it has going, updating the big boy GS to a water-cooled power plant for the 2012 model year.

With spy shots of the 2012 BMW R1200GS already hitting the interwebs, we have at least a basic understanding of what the new R1200GS will look like, and it would seem that BMW hasn’t moved too far from its best-selling design. As such, Bar had plenty to work from in the spy photos and current GS to create a series of renders that show what the new GS could look like at its unveiling later this year. As always it is top-notch work, check out Luca’s work after the jump.

Tracing back to when Ducati made the SS line, Luca Bar has put pen to pad again, rendering a modern-day version of the Ducati Supersport. Envisioning a motorcycle based off Ducati’s popular Monster 1100 EVO platform, the Supersport would feature the same 1,078cc air-cooled two-valve v-twin motor of the Monster, which should provide plenty of power and take some design cues from the top-spec naked bike. Bar also points out that using the Monster as the basis for the Supersport could help keep costs down as well, and keep the MSRP close to the Monster 1100 EVO (we’d imagine pricing would have the SS as slightly pricier than the Monster).

While the Suzuki GSX-R600 & GSX-R750 were updated for the 2011 model year, it seems like Suzuki’s crowned king of the liter-bike class hasn’t see a touch-up since the Reagan administration. This is due in part because of Suzuki’s staggered development life-cycle, but primarily rests on the motorcycle industry apocalypse that many just refer to as the past recession. Because of the economic downturn, Suzuki had an overabundance of motorcycles sitting in its domestic warehouses, causing the Japanese company not to bring over any more fresh units for the North American market.

Ever since we heard about the new 2012 Ducati Superbike, we’ve been marking the days until we could see the v-twin sex machine in the flesh. There’s no denying that the specs being banded about on the new Superquadrata motor are impressive, as the new bike is expected to make up to 20hp more than the current Superbike 1198 (though peak performance numbers only tell one side of the story). Also intriguing is the MotoGP-derived stressed-airbox chassis arrangement, which finally does away with the iconic trellis chassis, though has caused some problems for Valentino Rossi on his move to Ducati Corse.

Just last month we got our first look at the new Superbike prototype, as Ducati leaked first a Supersport spec version of what many think will be called the Ducati Superbike 1199. An encore to that moment, the street version of the v-twin superbike leaked just days later. While many of us will have to use our imagination on what Ducati’s latest creation will look like, we’re lucky that Luca Bar Design (website here: bar-design.net) can take those thoughts and put them to paper, err…pixels. Rendering the 2012 Ducati Superbike 1199 from what information that is available, this is perhaps one of the best glimpses as to what the Bologna Bullet will look like. Two more renders after the jump.

Last week Oberdan Bezzi inked his concept for a Triumph-powered Bimota, dubbed the Bimota TB-1. That fully-faired alternative to the MV Agusta F3 naturally needs a naked streetfighter variant, and accordingly Bezzi has penned today’s latest concept sketch, which he calls the Bimota TB-2 675. Featuring the Triumph 675cc three-cylinder motor, the Bimota TB-2 675 competes against its donor the Triumph Street Triple, and goes head-to-head with the heavily anticipated MV Agusta Brutale 675 B3.

Confirming that the rumors were true, Husqvarna recently released photos of its new 900cc motor destined for the company’s first proper street bike. Based on the 800cc BMW parallel twin, we’ll have to wait until November to see what the Swedish brand has in store for us, but until then Oberdan Bezzi has some ideas to help whet our appetite. Called the Husqvarna 900 Street One, Bezzi sees a street-naked in Husky’s future, which will help show-off the firm’s newly minted engine.

With the new Husqvarna expected to have both more torque and horsepower than its German counterpart, Obiboi sees the Husky 900 as a sportier version of the BMW line, and has put those feelings into his concept sketch here. Perhaps the only thing that rivals our curiosity on what the new Husqvarna will look like, is how the company will differentiate its street motorcycles from its parent company’s offering, and what it will mean for the fabled dirtbike brand.

In case you haven’t notice, we really like the work of Luca Bar. The young Italian designer has an eye for motorcycles we like to own, so it seemed fitting that we show off one of Bar-Design’s older works, the Moto Morini Corsaro Veloce.

With the fabled Italian company set to go up on the auction block again this summer, we thought perhaps some inspiration from Maestro Bar would help pull some buyers out of the woodwork. At the very least, it’s an excuse to show off some more drool-worthy motorcycle eyecandy.

We haven’t had a sketch by Oberdan Bezzi on the site in a while, but the Italian designer has inked this Ducati concept that we thought would help everyone get through the work week. Coining the name “Desmodoctor” it should be clear to whom Obiboi is paying homage to with this design, as Bezzi imagines what sort of “gift” the Bologna company would give Rossi to play around with when he’s not racing the Ducati Desmosedici GP11 or GP12.

We must have missed this April Fools render done by Luca Bar Design for the Italian site MotorBox, as Luca has once again flexed his skills with the pixels with his vision for motorcycles. Drawing on the idea that Honda would update its sport-touring line with a new version of the half-faired CBF1000, Bar explains that he has already been pondering the idea of an update for Honda before being set to his task of penning an April Fools bike.