145 Results

motoczysz

Search

Over the long weekend, Asphalt & Rubber got the chance to swing by Portland International Raceway for MotoCzysz’s first track test with the 2010 E1pc electric race bike. It’s hard to believe, but this was Michael Czysz’s first time riding his creation on the track. The session was prompted by Czysz’s need to get ready to race the E1pc at the up-coming e-Power Championship race at Laguna Seca. Czysz had hinted to us several months ago that he might pilot the electric race bike at Seca, and now has confirmed that intention to race the bike himself. .

Getting to tag along during the new E1pc’s first actual track test, we got to see how the 2010 MotoCzysz E1pc compared to ICE track bikes while lapping at PIR. Observations, photos, and two videos that prove we need to get a proper camcorder in the A&R office are awaiting you after the jump.

The Isle of Man TT organizers have released some on-board footage of the TT Zero winning 2010 MotoCzysz E1pc. Other than the impressive speed from the electric sportbike, what’s really noticeable about this video is the wind noise. The subject of electric motorcycles lacking the exhaust note normally associated with motorcycles has been hashed out numerous times before, but watching this video reminds us of a comment that Michael Czysz once made to us about how electric motorcycles were like sailboats.

Once you get out to the open water, and turn off your motor it transforms the experience into something else. We imagine that must have crossed rider Mark Miller’s mind at some point…before he quickly had to train his attention on the rapidly approaching street course. Check the video out after the jump.

Last week we got a leaked photo of the 2010 MotoCzysz E1pc, and knew the bike would be a contender in today’s TT Zero at the Isle of Man. Now that the TT for electrics is over, we can get a closer look at the machine that left the competition behind in the dust. MotoCzysz was a scratch at last year’s TT, and following that mantra the team effectively started-over from scratch for their 2010 effort. Back for 2010, there is of course the familiar MotoCzysz-designed 6X Flex front-end suspension system, but the rest of the bike centers around a revised energy package that’s been refined to engineering simplicity.

We’ve already covered how the central “suitcase” or eDD incorporates space maximizing v-shaped removable battery packs that pop-out with the push of a button. And how the entire 2010 MotoCzysz E1pc involves virtually no wiring, since everything dovetails perfectly together. We’ve also covered how the MotoCzysz D1-10 motor is replacing the three Agni motors from last year’s bike. Running off nearly 500 volts of power, the liquid-cooled IPM motor makes 250lbs•ft of torque, and generates over 100hp. The aerodynamics of the 2010 bike have been completely rethought, and employ a palatable design that achieves the aerodynamic goals to give the team a greater advantage with their limited on-board energy.

All of this is well and good, but it doesn’t mean shit if the bike doesn’t go fast.

Mark Miller took the 2010 MotoCzysz E1pc to victory today at the Isle of Man’s TT Zero race. Miller lapped the MotoCzysz E1pc around the Mountain Course with an average speed of 96.820 MPH and with a time of 23:22.890. Just shy of the 100 MPH average speed barrier, Miller passed through the Sulby speed trap going 135.300 MPH, and topped 140 MPH at one point.

Following Miller was Rob “Bullet” Barber who averaged 89.290 MPH on the streamlined Team Agni machine. James McBride finished on the podium with a 88.653 MPH average on the Man TTX race bike. Jennifer Tinmouth on the second Agni finished 4th, just seven seconds behind McBride.

MotoCzysz set an unofficial lap record today at the TT Zero, the Isle of Man’s electric class for the Isle of Man TT. Averaging 94.664 mph over the Mountain Course, Mark Miller and the 2010 MotoCzysz E1pc were clocked doing 131.1 mph through the Sulby speed trap. Compare those times to Rob Barber & Team Agni’s 83.689 mph run for the day, which was short of the team’s 2009 performance of 87.434mph (which is also the current class record). The Isle of Man government has setup a £10,000 prize for the first team to crack the 100mph average barrier, which could well be in MotoCzysz’s grasp after today’s showing.

UPDATE: We just got an email from Michael Czysz about the new E1pc, and the team’s progress so far at the Isle of Man. Read it after the jump.

Our Bothan Spies were hard at work this weekend, and have brought us this photo of the 2010 MotoCzysz E1pc that will be racing the TT Zero at the Isle of Man TT. From the pictures, the 2010 E1pc is sporting a significantly smaller tail (no hidden batteries here!), and a bevy of battery packs.

From what we can gather, there’s 12.5 kWh of battery power visible, assuming Czysz & Co. are using the same packs from the eDD. The front-end is the same MotoCzysz-patented design, while the rear of the motorcycle looks to have a longer swing-arm and conventional shock placement.

The motor is attached to the “suitcase”, low on the bike (as seen in the eDD renders) facing the clutch side of the motorcycle. It’s then linked via chain to a concentric shaft off the swing-arm (similar to the MotoCzysz C1), with the final chain linkage on the standard right-hand side of the E1pc. More info and photos as we get them. Big thanks to our anonymous tipster!

While attending the Skip Barber Superbike School, A&R Editor Jensen Beeler overheard a conversation between Lead Instructor Michael Czysz and a couple of students. As the students asked Czysz if he’d be at Seca to watch the Red Bull US GP, Czysz lamented that he would not be able to watch MotoGP at Laguna Seca because MotoCzysz would be racing that weekend. As some may remember the FIM’s e-Power Championship series has a round that is occurring at Laguna Seca in coordination with Dorna and the AMA. Czysz went on to pique out ears, confirming that MotoCzysz would be racing that weekend in the FIM e-Power Championship, with the rider yet to be determined.

Even though the official TTXGP entry list isn’t due to be out until Monday morning, Asphalt & Rubber has been working hard to find out what electric motorcycle manufacturers would be at Infineon for the first round of TTXGP. We already expect Zero to show up on something that doesn’t rhyme with Ravizen, but what about Mission Motors, MotoCzysz, and Brammo? The answer to that question would be: no, no, and maybe…but probably not.

While the video of MotoCzysz putting their new D1-10 electric motor up on the dyno is not terribly captivating (it’s hard to see anything really moving since all the fun bits are inside the motor’s casings), the performance figures the company quotes surely are impressive. The liquid-cooled IPM motor makes 250lbs•ft of torque, generates over 100hp, and employs a proprietary cooling system to allow a higher percentage of that peak power to be used over extended periods of time. This is particularly important because of the large gap between peak power figures and sustainable power figures in the electric motorcycle world, with the latter being the more important figure to quote.

Ending our two-part series that looked at the the MotoCzysz E1pc, we ask ourselves: why do motorcycles look the way they do? Probably the best answer to this question is that motorcycles today represent an amalgamation of 100 years of design evolution centered around the internal combustion engine. When we look at motorcycle racing, we see the design in its purest embodiment of function over form. While surely some semblance of aesthetics remains, the ultimate goal is to shave the next tenth of a second off a lap time. Each minor improvement adds up, and these aggregated can translate into substantial improvements when racing the clock and the competition.

So it surprises us when we look at electric motorcycle racing and see so many teams approaching their designs with the same ideas and concepts that were born out of this century of internal combustion engine (ICE) racing. While the two offshoots of the same branch carry over with them many similarities, the fundamentals of attaching wheels, suspension, and seat to a running motor has changed, and with that change surely there would be a large movement to rethink the way we build motorcycle frames. The fact of the matter however is that many electric motorcycle designers choose to pursue cramming an electric motor and batteries into a frame, and ultimately into and architecture, that was refined for a gasoline pumping motor and doesn’t fully integrate the chassis’s from with its function.

In an industry that rethinks motorcycles from the ground up, the biggest paradigm shift has been left out by all but a few teams and manufacturers. Looking for the next generation in motorcycle chassis design, Asphalt & Rubber recently got to sit down with Michael Czysz to get an up-close look at the 2009 MotoCzysz E1pc electric motorcycle, and also got a sneak peak at the 2010 frame and chassis. As one of the few entities to rethink how a motorcycle should be design and produced, Czysz’s insights into his design give a glimpse as to what the next 100 years of motorcycle evolution will look like.

After a lively discussion on fully-faired motorcycles in his original post, including a lengthy post by Craig Vetter, Michael Czysz follows up the discussion by further delving into streamlining, dustbins, and the difference between the two. In his discussion Czysz explains the purpose and benefit of taking aerodynamics into account not only in electric racing but also in ICE applications, and then walks us through its use on the MotoCzysz C1.

The post is a good primer on the exponential force that streamlining tries to overcome, and well worth a read for that purpose. Michael Czysz closes his post with a hint that he’ll have a dustbin at the ready should the field warrant such a fairing, and should his rider Mark Miller feel comfortable using it. Check it all out here.