Latest Posts:
Asphalt & Rubber
Tag

custom

Browsing
Bikes

David Yurman Forged Carbon Moto by Walt Siegl

By 13 Comments

Many of you have likely seen Walt Siegl’s “Bol D’Or” custom MV Agusta Brutale 800 with a retro-flare. It is an amazing piece of work, and the basis for today’s post, which brings you a glimpse of the David Yurman Forged Carbon Moto by Walt Siegl.

Actually the first model from Walt Siegl’s Bol B’Or line, we are just seeing this motorcycle now because it comes with a twist: it has forged carbon parts, crafted by jewelry maker David Yurman.

A lot can be said about forged carbon, enough worthy of its own article, but the tl;dr version is that the composite material is set to replace traditional carbon fiber parts – in a big way.

Keep Reading
By
Bikes

XTR Pepo’s “Siluro” Custom Ducati Monster 1200

By 18 Comments

It has been a while since we showed you one of XTR Pepo’s custom works, so please forgive our sins. To make it up to you though, we have the Siluro, a custom Ducati Monster 1200 that Ducati Spain commissioned from the Spanish bike builder.

If I’m honest, Ducati’s Monster line has really never struck a chord with me, but there is something about the Siluro that’s got me more than a little twitterpated.

Perhaps it is the high-mount, scrambler-styled Termignoni exhaust, or maybe it is Pepo’s signature “RAD” seat, that has adorned so many custom Ducati’s before this one, but is now wrapped in suede. Whatever it is, it’s working.

Keep Reading
By
Bikes

Burasca 1200 – Aldo Drudi’s Custom Honda VFR1200F

By 12 Comments

The Honda VFR1200F isn’t exactly the most popular motorcycle in Honda’s two-wheeled lineup. This might be because the large and heavy sport-tourer shows Honda’s commitment to pushing the VFR brand farther away from its sport-tourer roots, much to the chagrin of VFR owners.

The package isn’t all bad though, it just doesn’t work for a bike billed as a sport-touring machine. The Honda VFR1200X is basically the same bike with longer suspension and different bodywork, and as an adventure-sport machine, it fits the bill quite nicely.

The chassis handles its 590-pound mass well, and the 1,27cc V4 engine has plenty of grunt , and this is what must have been what attracted Aldo Drudi to the machine for his first motorcycle concept.

Better known as the maker of various racer helmet designs, most notably Valentino Rossi’s (expect another Drudi custom helmet, later this weekend), Drudi and his team have dreamed up a VFR that couldn’t possibly exist in Honda’s conservative offerings. They call it the Burasca 1200.

Keep Reading
By
Bikes

The SnoPed is An Evil Villain’s Snowbike

By 13 Comments

Summer is right around the corner for those of us in the Northern Hemisphere, so the obviously appropriate time to talk about a snowbike is now, right?

What the SnoPed lacks in seasonal appropriateness, it absolutely makes up for in super-villain stature, as the modern-looking snowbike looks like it rolled (is that the right verb?) off the set of a Hollywood spy movie.

The brainchild of American designer Joey Ruiter, SnoPed features a 90cc engine (out of a Chrysler Sno-runner) underneath its sculpted body, which isn’t exactly going to blow your socks off when knee-deep in the powpow, but is enough to scurry down a groomed cross-country trail.

Keep Reading
By
Bikes

Praëm BMW S1000RR – Getting Modern with Retros

By 14 Comments

We really like what we’ve seen so far from the guys at Praëm. Their first proper build, based off a Honda RC-51, was waaaay outside the box, and featured some really interesting design elements for us to chew on. Their follow-up to that work is no different.

The Praëm BMW S1000RR is a modern riff on the classic superbike design – think of it as a 21st century take on late-20th century racing.

As the name suggests, the donor bike is a BMW S1000RR, but the styling comes from something you would see in the 1980s – perhaps at the Suzuka 8-Hour endurance race, as Praëm suggests in their text.

The “Optimus Praëm” build is a logical, yet a highly more functional, response to what we have seen in the café racer scene as of late, and it bodes well for the future of the custom motorcycle community if more of the same is to come from other builders. Fingers crossed.

Keep Reading
By
Bikes

Confederate P51 Combat Fighter, Second Generation

By 35 Comments

Confederate Motors is making some of the most intriguing and evocative custom motorcycles on the market right now, and the company’s second-generation Confederate P51 Combat Fighter is no different.

Taking some cues from the first-generation Fighter, as well as a couple nods from the Confederate X132 Hellcat, the Confederate G2 P51 Combat Fighter not only encapsulates everything good about the Confederate Motors brand, but it’s also Pierre Terblanche’s last work at the Southern company, before heading to Royal Enfield.

Confederate says that the G2 P51 Combat Fighter draws inspiration from the “1960’s rebel, anti-hero and the stripped, raw, chopper he rode.” The custom certainly is sinister in its look, especially in the blacked-out version. Oh, did we mention is boasts over 200hp at the rear wheel?

Like all Confederate machines, these P51 Combat Fighters will be bespoke to each owner, of which there will be only 61 units made. MSRP for the blonde model is is $113,900 (30 units in total), while the brunette will cost you $119,500 (31 units to be produced). More photos and details after the jump.

Keep Reading
By
Bikes

Monty by XTR Pepo

By 14 Comments

The “Monty” is the latest build from XTR Pepo, and as you can tell from the styling, this is the work of the same mind that brought us the Radical Ducati.

Pepo has since branched out from Ducatis though, taking on other brands, so it shouldn’t surprise us that the Monty started life as a 1978 Laverda 500 Alpino — the name being a nod to the Laverda Montjuic, which was based off the Alpino, and affectionately called “Monty” in-short by its owners.

While there are a number of Laverda parts in the build, if you look closely at XTR Pepo’s Monty, you will see the swingarm from a Suzuki Bandit, front forks from a Ducati Monster, a GSX-R600 clutch lever, and Honda CBR600RR footpegs — all in the name of continuing of XTR Pepo’s motorcycle pick-and-pull build style.

There is something to be said about the recycling of parts that normally would have little value to most riders, yet can be integral in making Pepo’s imagination come to fruition. Of course, there are also a number of XTR Pepo’s bespoke parts on Monty as well.

Keep Reading
By
Bikes

Ducati Scrambler Hero 01 by Holographic Hammer

By 9 Comments

We’ve been big fans of the work done by Holographic Hammer for a long, though we have only curious featured their work once before — and that’s a shame, since the French outfit is making some interesting concepts, both digitally and physically.

We’re therefore happy to share with you their latest work, the Ducati Scrambler “Hero 01”.

Holographic Hammer tells us that they wanted to keep the purpose of the Scrambler at the Hero 01’s core, namely a bike that you actually used on a day-to-day basis. It would get dirty, it would get scratched, it would tip over…therefore a bunch of intricate and expensive kit wouldn’t do.

The changes therefore are practical and affordable, sans maybe the $3,000 carbon fiber Rotobox wheels…after all though, one has to live. Right?

Keep Reading
By
News

A BMW Scrambler Cometh?

By 17 Comments

It appears that BMW Motorrad wants in on the retro-styled scrambler game that Ducati and Triumph are playing, and is looking to use its R nineT platform to do the job.

The scrambler model, which has already been previewed to BMW’s European dealers, would be just the first of several budget-oriented models to come from BMW, all of which would be based off the BMW R nineT.

The scrambler is expected to debut later this year with its 100hp air-cooled engine, while the other models, namely a café racer model, will come in 2016.

Keep Reading
By
Bikes

Quattrocento by XTR Pepo

By 9 Comments

What happens when you take the unassuming French-built MASH 500 and give it the same Spanish treatment that brought us the Radical Ducati brand? Something certainly a lot less bland than the budget-friendly standard, that’s for sure.

Radical Ducati’s Pepo has a new company, XTR Pepo, and he has branched out beyond just restyling Ducati motorcycles.

Accordingly, he just sent us his latest work, the Quattrocento XTR Pepo – and we are glad to see that out-of-the-box designs that are Pepo’s bread and butter remain in the motorcycle industry with his latest creation.

Unsurprisingly, just about all of the MASH 500 that remains is the learner-bike’s engine, and a few pieces of the frame; since as usual Pepo has sourced just about everything else from the leftover parts bin of other motorcycles.

Keep Reading
By
Bikes

“Scrambler Café Racer” Ducati Scrambler by Mr. Martini

By 24 Comments

The third, and last, Ducati Scrambler concept from the Verona Motor Bike Expo, the “Scrambler Café Racer” by Mr. Martini is exactly what the name implies: a cafe racer styled scrambler motorcycle.

Mr. Martini appropriately added a high-mount exhaust to his “scrambler” and retained the Scrambler’s Pirelli knobby tires. The addition of a cafe racer fairing though is an interesting choice, and leaves this concept straddling the two staples of hipster motorbiking in the custom scene.

We’ll let you decided whether this doubles the “post-authentic” nature of the Scrambler, or if the work is just an overload of the self-ironic.

Keep Reading
By