Victory Ignition Concept Is A Very Sporty Cruiser

It had been widely rumored that Victory Motorcycle would launch a sportier offering, using the 60° water-cooled 1,200cc engine that powered the Project 156 race bike almost to the top of Pikes Peak. The new model is a tectonic shift for Victory, which also this year debuted its first electric model – though the Empulse TT is really just a rebadged Brammo Empulse R. Debuting the Ignition concept at the 2015 EICMA show today though, it’s clear that Victory Motorcycle is becoming more than a modern alternative to Harley-Davidson and the metric cruisers from Japan. The design is attractive, even to our sport-bike focused eyes. That’s due in part to designer Urs Erbacher, who specializes in custom-styled drag bikes.

2016 Benelli Leoncino Brings Back the Lion Cub

Benelli is not a brand we usually talk about with great reverence, as the Italian company has steadily lost its luster since its acquisition by China’s Qianjiang Group. Benelli’s motorcycles were never known for being terribly reliable, and unfortunately the artful designs that they exuded have slowly eroded away over time. The big announcement for Benelli at the 2015 EICMA show is the new Benelli Leoncino, the “lion cub” model that’s rooted in Benelli’s post-WWII history. This modern take on the classic Benelli Leoncino is an attractive scrambler model, which makes 47hp from its 500cc parallel-twin engine. This also means that the Benelli Leoncino a well-suited A2 license machine in Europe, and its wire-spoked wheels are 19″ in the front and 17″ in the rear, and should make the Leoncino surprisingly adapt at light off-road use.

Bimota Tesi 3D RaceCafe Is “Pinnacle Weird”

We present you with perhaps the strangest motorcycle to debut at the 2015 EICMA show. The Bimota Tesi 3D champions the hub-center steering chassis design, and is one of the more unique motorcycles in the industry right now. Its design is positively futuristic, so it is a little strange that Bimota is trying to make the Tesi 3D into a café racer with the launch of the Bimota Tesi 3D RaceCafe. Powered by the same 803cc air-cooled v-twin engine that’s found in the Scrambler series, you can tell that Bimota is trying to latch onto the post-heritage trend that is dying a slow death in the motorcycle industry, but hasn’t quite figured out how to do it yet.

Bimota Impeto, Supercharger Optional

The Bimota range has a long history of Ducati-powered machines, as the Italian brand has been used the most out of all the motorcycle manufacturers to power Bimota’s street and race bikes. The Bimota Impeto adds another Ducati-powered model to the slew of others, but it differentiates itself as the only 162hp streetfighter in the lineup. If the Impeto looks familiar to the Bimota DB8, there’s good reason, as the two bikes share the Ducati Diavel’s Testastretta 11° DS engine. As such, the chromoly steel chassis share a number of components, leaving most of the differences down to styling choices between the two liquid-cooled models. Our personal favorites are the exhaust and seat, which mirror each other with a rising flair.

The Aprilia RSV4 R-FW Misano Is Basically a MotoGP Bike

The Aprilia Factory Works program is easily the most ridiculously awesome thing to come out of the 2015 EICMA show because it offers regular consumers (with a healthy pocketbook) the chance to own a 230hp+ Aprilia RSV4 superbike, just like what they race in the World Superbike Championship…and very close to what they race in MotoGP. Aprilia was a little vague though on what the Factory Works program entailed, but thankfully today at the EICMA show they clarified what exactly would be available from Aprilia Racing. Coming up with five trim-levels for the RSV4 superbike, Aprilia has basically answered every track day enthusiast’s / amateur racer’s wet dream, and distracted us from the fact that the Noale company has a woefully aging product lineup.

Here is What the 2017 Suzuki GSX-R1000 Will Look Like

As we predicted, Suzuki has debuted a new Suzuki GSX-R1000 superbike at the EICMA show, though before you get your hopes too high, we should preface that the model is actually the Suzuki GSX-R1000 concept. Suzuki clearly isn’t ready to bring the GSX-R1000 to market in-time for the 2016 model year, and our sources tell us that the Suzuki GSX-R1000 Concept will in fact be the 2017 Suzuki GSX-R1000, which will debut in the second half of 2016. That being said, the news is an exciting development from Suzuki, which says that the new Suzuki GSX-R1000 is the lightest and most powerful superbike ever from the Japanese manufacturer. To our eye, it looks to be the most advanced as well.

Erik Buell Racing Deal Falls Thru – Will Be Sold…Again

The situation around Erik Buell Racing is rapidly becoming comical, as the American motorcycle brand is headed back to auction, after its sale to Bruce Belfer failed to close. The Milwaukee Journal-Sentinel reports that Erik Buell Racing will go back to the auctioning block on December 10th, because Belfer was unable to secure financing on his $2.25 million purchase price for Erik Buell Racing. As has become the trend among Buell-loyalists, Belfer blames Hero MotoCorp for the failure of his deal to close. “They (Hero) went in before we closed and started to remove things, to the point where an entire warehouse was moved,” Belfer said to the Milwaukee Journal-Sentinel.

The Yamaha MT-10 Is Not Your Grandpa’s FZ-1

Perhaps a model whose debut is obvious to us now, hindsight always being 20/20, Yamaha has just dropped the 2016 Yamaha MT-10 on us at this year’s EICMA show. The Yamaha MT-10 helps round out Yamaha’s MT brand, with affordable and edgy models available from 125cc all the way up to now 1,000cc. Without even riding the Yamaha MT-10 we are fairly certain that this street bike, with its Yamaha YZF-R1 race track DNA, is a hoon to ride with its over-abundance of personality – it would have to, with a face like that. There is no word yet if the 2016 Yamaha MT-10 will come to the USA, potentially supplanting the Yamaha FZ-1 from its perch. Considering how different those two bike demographics are though, we have a hard time seeing it.

2016 Ducati Multistrada 1200 Enduro – More ADV

This is Ducati’s first real foray into the adventure-touring segment of motorcycles, and the 2016 Ducati Multistrada 1200 Enduro promises to up the ante on the Multistrada 1200’s off-road ability, with a purpose-built trail stomper. As we can see from the photos, there have been several changes to the Multistrada 1200 to make it more ADV capable, the most important of which is the double-sided swingarm, for added strength and rigidity. Other changes include a 19″ front wheel, shod with knobby tires, a skid plate, and a higher-mounted single exhaust can. We are told the fuel tank has been punched out to 30 liters, which is almost 8 gallons – certainly enough fuel to get you properly lost in the great outdoors.

Bimota Impeto “Hyper-Naked” Debuting at EICMA

In addition to the Bimota Tesi 3D RaceCafe that will debut at the EICMA show in Milan next week, the boutique Italian brand has another new model for our two-wheeled consumption, the Bimota Impeto. Bimota is calling the Impeto a “hyper-naked” model, which we take to mean a nasty-fast streetfighter machine, which will take over from the Bimota DB9. We say this because sometimes things get lost in translation when it comes to Bimota press releases. Bimota does clearly say though that the Ducati Testastretta 11° DS engine will power the Bimota Impeto, which should mean that the Impeto will make around 162hp with its dual-spark engine.

A Motorcycle Service Manual in Your Dash? A Look at the Motus MST’s All-Glass Cockpit

07/23/2013 @ 1:50 pm, by Jensen Beeler11 COMMENTS


This weekend at MotoGP’s Red Bull US Grand Prix at Laguna Seca, I stopped by the Motus ten to give Lee Conn and Brian Case some grief, and to see how the production-ready Motus MST was looking. The bikes looked similar to their prototype form from two year’s ago, with obviously more fit-and-finish in the overall design. One of the big changes I noticed though was that Motus has dropped the industry standard analog tach and LCD speedo for an all-glass cockpit design.

2014 Motus MST Sport-Tourer Launching at Laguna Seca

07/12/2013 @ 6:57 pm, by Jensen Beeler37 COMMENTS


It was two years ago that I first caught glimpse of the Motus MST at Laguna Seca (actually, I missed seeing the prototype machine at the track, and had to ambush the Motus crew at Alice’s Restaurant the next day), but now the American motorcycle upstart is ready to debut its production sport-tourer.

Motus Lands West Coast Dealerships

05/29/2012 @ 3:15 pm, by Jensen Beeler18 COMMENTS

When Motus released the final details on its inaugural 2013 Motus MST motorcycle, we were shocked to see that the Alabama company did not have any dealerships lined up for west of The Rockies (surely the bigger shock felt by others was the $30,000+ price tag). Well that has changed now according to Motus, which has signed up four West Coast dealerships, one in California, one in Washington, and two in Nevada. Sorry folks, the price is still the same though.

More Motorcycling Video Goodness from Motus Motorcycles

04/14/2011 @ 9:22 am, by Jensen Beeler13 COMMENTS

Motus Motorcycles has just released the second part of its Daytona launch video, which unlike the first version, is chalked full of close-up and detail shots of the Motus MST and the performance-packed Motus MST-R. The Daytona Bike Week was the public launch of the new American-made sport-tourer, which features the KMV4 1,645cc V4 pushrod motor with gasoline direct injection. Motus’s approach with the KMV4 is to take a page out of America’s rich hot-rodding tradition, and therefore has built a power plant that tuners and hobbiests should find the designs of familiar.

Helping Motus build this tiny buy powerful engine is Pratt & Miller Engineering, who have made a name for themselves building all sorts of racing engines, including those from the C6R Corvette Racing squad, which coincidently also uses a pushrod design. This has lead to many calling the KMV4 as simply half a Corvette motor, which the math doesn’t really support, but the philosophy surely does.

Next for the Motus crew is a ride around the United States that will not only serve as an R&D/proving method for the new bikes, but will also help drum-up interested buyers and the much needed dealers to get the motorcycle company launched off the ground. We’re looking forward to seeing the 161hp sport-tourer come to San Francisco, we just hope the rumors we’ve been hearing of a $30,000+ price tag aren’t true. Get ready to bust out your “V4” gang signs, as the video is after the jump.

Are You the Motus MST-R?

03/10/2011 @ 12:26 pm, by Jensen Beeler4 COMMENTS

We just showed you the first video that Motus has shot while down at Daytona launching the company’s new sport-tourer to the Bike Week crowd. We’re clearly not on our A-game today (I’m suffering from a nasty head cold, and have to fly in 24 hours to Qatar for the MotoGP test), but luckily our readers are, as one commenter has spotted the fact that Motus switches bikes mid-way through the Daytona video.

Sans fairings, and adorned with Öhlins forks (along with a carbon fiber front fender), it looks like Motus has snuck in the Motus MST-R into the shot without anyone noticing. Still not convinced? Well the rider in the video has a clearly labeled “MST-R” logo on his helmet as well. We’ve reached out to Brian and Lee to see what they can confirm or deny on this. Stay tuned.

Video: Motus MST Stretches Its Legs on the Dyno

02/11/2011 @ 4:56 pm, by Jensen Beeler20 COMMENTS

There might be snow on the ground for most of the United States, but things in the south are starting to heat up now that Motus has gotten its MST sport-tourer on the dyno, and for a quick ride in its latest video on YouTube. Letting the 1645cc gasoline direct-injection KMV4 motor “unleash the beast” as it were, the project seems to be coming together nicely as we’re given a rapid succession of quick-cuts on the MST’s build job.

We expect to see the built-in-America bike on city streets once the ice thaws (or Motus realizes it was 70°F in sunny San Francisco today, and makes a stop by the Golden State), and the video’s ending suggests we’ll get another installment while we wait for winter to subside.

We’re still going through the video to see if there’s any nuggets of info hidden inside. Call them out in the comments if you see something.

Motus Motorcycles Gets Help From Pratt & Miller Engineering for MST V4 Sport-Tourer

09/17/2009 @ 8:47 am, by Jensen Beeler3 COMMENTS

Motus Motorcycles is back on the radar after their mysterious awakening back in April. Along with slightly less cryptic information about their MST V4 sport-tourer, Motus has announced their partnership with Pratt & Miller.

If you’re not familiar with Pratt & Miller, they’ve made quite a name for themselves in the automotive endurance racing scene developing chassis in the American Le Mans Series, Rolex Grand-Am series, NASCAR, and have won the 24 hours of Le Mans six times in the GT1 category. Pratt & Miller have also worked with the US military in developing missiles and other classified projects.