Latest Posts:
Asphalt & Rubber
Tag

photos

Browsing
Bikes

2013 KTM 390 Duke – AYBABTU

By 17 Comments

Officially official now, there isn’t much about the 2013 KTM 390 Duke that we don’t already know ahead of the opening of the EICMA show. Built in India by KTM minority shareholder Bajaj, the KTM 390 Duke is a 373cc single-cylinder bike that shares the same chassis as the KTM 125 Duke & KTM 200 Duke.

Suitable for Europe’s A2 licensing system, the largest baby Duke competes well against bikes like the Honda CBR500R and Kawasaki Ninja 300, and thus finishes out the Austrian’s bid to control the small-displacement market.

Keep Reading
By
Bikes

2013 Triumph Daytona 675R: A Bargain Racer for $13,499

By 10 Comments

Like the 2013 Triumph Daytona 675, the “R” model of Britain’s three-cylinder supersport has gotten a number of refinements and changes for the new model year. Virtually every aspect of the Triumph Daytona 675 has been seen to, and we won’t rehash those changes here (head over to our article on the base model for the full-monty).

Commanding a $1,900 premium over the base model, the 2013 Triumph Daytona 675R adds a TTX rear shock and NIX30 inverted forks to the mix, along with a new quick shifter, higher-spec Brembo monobloc brakes, and some carbon fiber bits.

Would we spend the extra green for the Daytona 675R over the base model? Yup, but the better question is whether you would buy the Triumph Daytona 675R over the MV Agusta F3. Decisions, decisions, decisions. Look for the 2013 Triumph Daytona 675R in dealerships come February 2013.

Keep Reading
By
Bikes

2013 Triumph Daytona 675: 126hp for $11,599

By 5 Comments

As we saw with the 2013 Triumph Street Triple, the 2013 Triumph Daytona 675 supersport gets a slew of modifications for the next model year. Reworking the Daytona 675’s three-cylinder motor, Triumph has been able to coax an additional 2hp and 2 lbs•ft of torque from the British-born sport bike. Revising the frame and bodywork, Triumph has also shed 3 lbs from the 2013 Triumph Daytona 675.

Accordingly, the Triumph Daytona 675 is now good for 126hp @ 12,600 (redline is 14,400 rpm), while power has been improved throughout the rev range. One of the more obvious changes to the 2013 Triumph Daytona 675 is the adoption of a GP-style low-slung exhaust, in favor of the previous undertail unit. Certain to offend some purists, we think the change has been tastefully done, and it helps to centralize the mass on the three-cylinder track weapon.

Keep Reading
By
Bikes

Husqvarna Baja Concept Gets Closer to Reality

By 11 Comments

When Husqvarna debuted the at the start of this year, it was tipped that the Husqvarna Baja Concept, which was modern take on the Husqvarna Cross 400, could make it into production. We rejoiced. Eleven months later, Husqvarna has returned with the Husqvarna Baja 650 Concept at the EICMA show, and the design has gone a great deal forward from its avant garde angles, to something that is a bit more rounded.

Looking like a bike that is ready for production, it wouldn’t surprise us to hear that the German-owned brand will bring the Baja to market in 2013. Based around the same 652cc BMW engine that is found in the Husqvarna Strada, the Husqvarna Baja 650 Concept uses a steel tube frame for the chassis.

Keep Reading
By
Racing

Husqvarna TE449 RR Dakar Race Bike by Speedbrain

By 2 Comments

To be entirely honest, we don’t follow the adventure racing arena as much as we should, giving only a little bit of press to the world-famous Dakar Rally at the start of each year. So, we really can’t do justice to what Husqvarna and Speedbrain are doing with this factory-backed Husqvarna TE449 RR Dakar bike.

The photos are surprisingly detailed though, and are probably as close as you will ever get to a proper works rally machine, and Husqvarna gives a good accounting of the bike’s progression and current development. Rather than fake our own rewording of their story, read it after the jump. It’s pretty interesting.

Keep Reading
By
Racing

MotoGP: First Shots of Rossi Back on the Yamaha YZR-M1

By 20 Comments

Here’s one for the Rossi fans, the first photo of Valentino Rossi on-board the 1,000cc Yamaha YZR-M1 at the Valencia test (snagged by Monster Yamaha Tech 3 mechanic Steve Blackburn).

Apparently, the weather is being less than co-operative in Spain, with sprinkles of rain being reported, but that didn’t stop The Doctor from getting on-board “his” bike.

After the jump, there are 17 photos of Rossi’s maiden voyage back on the Yamaha YZR-M1 — all courtesy of photographer extraordinaire, Scott Jones.

Keep Reading
By
Bikes

2013 Bimota DB12 – The Most Expensive Multistrada Ever?

By 7 Comments

While we wait to here the specs on the upcoming Bimota BB2, the boutique Italian firm’s rekindled collaboration with the German motorcycle manufacturer, Bimota continues to work with Ducati lumps, both of the air and liquid-cooled variety. One of the more intriguing concepts put forth at EICMA, the 2013 Bimota DB12 is an expression of an uber-exotic Ducati Multistrada 1200.

Unlike the supercharged Bimota DB11 VLX, the Bimota DB12 will remain naturally aspirated in its 160hp state, but like how the Multistrada 1200 was part of the Bologna Brand’s movement away from being solely a sport bike company, the DB12 represents the same movement for Bimota. Already showing a dirt bike at last year’s EICMA show, the 2013 Bimota DB12 is clearly the Italian brand taking a step back, and testing the waters with this design direction.

Keep Reading
By
Bikes

Hi-Res: 20 Photos of the 2013 Ducati Hypermotard

By 13 Comments

Our favorite bike of the EICMA show so far? The 2013 Ducati Hypermotard SP, no doubt. Featuring a new 821cc Testastretta 11° DS motor, the 2013 Ducati Hypermotard and its tour-ready compatriot, the 2013 Ducati Hyperstrada bring Ducati’s maxi-motard line into the dark side of liquid-cooling.

Featuring slightly over-square cylinder dimensions, the new Ducati Hypermotard sounds like just what the doctor ordered for San Francisco’s pot-holed streets. Don’t get us started about the white color scheme on the Hypermotard SP, which is drop dead sexy. Consult a doctor before clicking past the jump.

Keep Reading
By
Bikes

Roland Sands “Hypermodifies” the 2012 Yamaha Tmax 530

By 3 Comments

What happens when you give Southern Californian bike builder Roland Sands few instructions beyond “build something cool”? and a 2012 Yamaha Tmax 530? You get one of the most pimped out Tmax scooters ever seen…and that is saying a lot. A popular choice with bike tuners and builders in both Europe and Japan, the Yamaha Tmax 530 hasn’t caught on here in the “scooters are for girls” United States of America.

Based around a 46hp 530cc parallel-twin motor, the Tmax 530 has some pep underneath its feet-forward design. Disguised as docile scooter, the Yamaha Tmax is no stranger to shedding its clothes for some performance persusasion, and Roland Sands has tapped into that vein of the Tmax here with his build, which will debut at EICMA tomorrow.

A “hypermodified” 2012 Yamaha Tmax 530, Sands has his usual touches in the machine, which is both a tasteful and raw representation of the looming scooter apocalypse. If Mad Max rode a scooter, this might be it. We love the tan leather seat with its subtle beige stitching, and of course the “braaaaaap” of the baffle-less exhaust. More photos after the jump.

Keep Reading
By
Bikes

Leaked: 2013 KTM 390 Duke – 373cc, 43hp, EFI, A2 Ready

By 3 Comments

The Dutch folk at Nieuwsmotor have snuck their way onto the EICMA showroom floor, snapped photos of the KTM 390 Duke kiosk, and posted the images to their blog — giving us the first proper viewing of the Austrian brand’s 373cc street-thumper. Like the 2013 Honda CBR500R, the  2013 KTM 390 Duke is setup for the A2 licensing tier in Europe, and accordingly makes 43hp @ 9.500 rpm and 26 lbs•ft of torque @ 7,250 rpm.

Complete with ABS and built in India by minority shareholder Bajaj, the 2013 KTM 390 Duke is slotted to enter the US market next year, and should be aggressively priced against the competition. For already-motorcyclists and would-be motorcyclists in the market for a cheap, but potent, small-displacement machine, next year is going to be a very good year.

Keep Reading
By