OMG: Leaked Hi-Res Photos of the Kawasaki Ninja H2R

In five hours the Kawasaki Ninja H2 will officially debut at INTERMOT…of course, the internet waits for no motorbike. In addition to the first leaked photo we brought you, we now have a bevy of high-resolution images of the Kawasaki Ninja H2R, the racing sibling to the H2. The Kawasaki Ninja H2R makes an incredible 300 horsepower from its 998cc inline-four engine, a number that is achieved by the H2 & H2R’s centrifugal supercharger. That figure is much larger than some publications were reporting from their “sources” inside Kawasaki — or were just fabricating wholesale to get pageviews. From the photos, we can see that the H2 & H2R use a trellis frame, carbon fiber fairings, and single-sided swingarm, three things you don’t usually see on a Kawasaki sport bike.

Brammo eCruiser & Other Models Spied in Investor Pitch

Brammo continues to build upon its war chest of investment, and has turned to crowd-funding site EarlyShares for help in that regard. The site is targeted towards Angel-type investors, and is along the lines of a Kickstarter-style site for the wealthy and investment-minded. The news that a company like Brammo is looking to raise more capital is nothing new, nor is it terribly noteworthy, but the documents provided to EarlyShares investors are certainly worth chewing on by two-wheeled enthusiasts. Perhaps the most interesting aspect is a diagram of Brammo’s planned model lineup, which briefly appeared on EarlyShares; and among other things, shows an eCruiser model from the Oregonian company. Boom goes the dynamite.

Review: Dainese Made to Measure Leather Racing Suit

Do you ride like Valentino Rossi, or maybe just want to look like him? I ask, because that’s the premise behind Dainese’s Made to Measure program. Giving everyday riders the same opportunity and attention to detail as the company’s sponsored racers, who compete at the heightest level of the sport, Dainese’s Made to Measure program allows you to order custom-fitting racing leathers, jackets, and pants from the trusted Italian brand. The following is my experience in making a race suit with the Italian company’s custom apparel program, and since the bulk of Made to Measure orders are custom racing suits, it seems an appropriate measure for its service.

Electric Supermoto Coming from KTM Too?

We already showed you KTM’s two electric dirt bike models, the KTM Freeride E-XC and KTM Freeride E-SX, which feature a 21hp / 31 lbs•ft electric PMAC motor and a swappable 2.6 kWh lithium-Ion battery pack. The models represent KTM’s rethinking on its electric range, especially when it comes to the current limitations of electric motorcycles, and what the current state-of-technology is in this space. While the new Freeride E-XC & E-SX show KTM is moving in the right direction, the two models didn’t do a lot for our asphalt-loving hearts here at A&R. Never fear though, as rumors from Italy’s Moto.it peg a supermoto version will debut at INTERMOT.

The Most Ridiculous Thing I’ve Ever Seen in This Industry

I have seen a lot of things in the motorcycle industry since I started Asphalt & Rubber, but never before have I seen something like this. During the autumn months, it is not uncommon for A&R to receive tips about new motorcycle models that are about to debut, and today was seemingly no different. This morning we got an enthusiastic email from a purported regular reader (make that two readers now), asking why we weren’t covering the leaked details on the supercharged Kawasaki H2, which were apparently “going viral” all over the internet, as the email told us. Like any good editor though, I dove into the story deeper. What I found has me supremely worried.

More Details on the Updated 2015 BMW S1000RR

I have to say, I really like the cut of BMW’s jib. Instead of making us dance through a social media bonanza of teasers and trickle-down motorcycle specs, the German company just publishes a press release with what it plans on changing for the 2015 BMW S1000RR. As loyal readers will know, we caught the updated S1000RR out testing last month, which showed a number of subtle cosmetic and system changes to the machine. BMW Motorrad has now clued us into what those changes are, namely a revised chassis geometry. From our spy photos, we know that the S1000RR will also get the HP4’s dynamic damping control (DDC) suspension, as well as new exhaust.

Ducati Owners: You Are Not Ready for the 1299 Superbike

You would have to be living under a rock not to know about the upcoming Ducati Scrambler, Bologna has made certain of that. But as we surmised in our analysis of Scrambler’s marketing, Ducati is due to update the Panigale as well for the 2015 model year. That educated guess, it seems has been proven correct, at least in part. While Borgo Panigale will continue to sell its namesake Ducati 1199 Panigale, the Panigale R model will be replaced for 2015 by the new 1299 superbike. As such, the 1299 will be Ducati’s consumer-facing machine for its World Superbike program — a project that has been greatly affected by WSBK’s intake restrictions for v-twins — thus race teams can expect an upgraded RS15 as well to be coming forth.

Ducati 1199 Streetfighter Concept by Shantanu Jog

One of the reason we show concept sketches here on Asphalt & Rubber is to help churn the imagination of our more creative two-wheeled brethren, so it warms my soul a little bit when a reader sends me something they’ve produced, which is due in part to their daily A&R patronage. As such, A&R reader Shantanu Jog sent us these sketches he did of a 1199-based Streetfighter. As good Ducatistas will know, the chassis of the Panigale creates some challenges for a fairing-less machine, and then there is the whole thing about how the Ducati Streetfighter as model never really sold well for Borgo Panigale. Still, for those who like their superbikes with a little less plastic, the idea of an 1199 Streetfighter is certainly appealing.

BMW Confirms New S1000RR Will Debut at INTERMOT – Two More New Bikes to Debut at EICMA

We already know that BMW Motorrad has a bevy of new machines coming out for the 2015 model year, and now the Germans are ready to admit as much. Confirming that a new BMW S1000RR superbike will debut at the INTERMOT show, BMW has also teased that two more new models will also debut at EICMA. From the spy photos that we obtained, we know that the 2015 BMW S1000RR features modestly updated bodywork, a restyled exhaust, and likely features a mild engine reworking. We will have to wait a couple more weeks to get the full details though, but expect a modest hp boost, semi-active suspension, and the Bosch MSC cornering-ABS system as standard — much like the BMW HP4.

Print Out Your Own Ducati 1199 Panigale Motorcycle

One day, 3D printing technology will fundamentally change the motorcycle industry. Currently however, companies use 3D printing, or rapid prototyping, to quickly and cheaply build parts for development machines. Enthusiasts also use the technology, though mostly as a novelty, which is the case here. A glimpse perhaps in how we will one day buy motorcycles, some clever modelers have “printed” a pretty convincing 3D copy of the Ducati 1199 Panigale. Built in CAD, and printed with a Ultimaker, the attention to detail is pretty astounding — note the chain that exactly meshes up with the front and rear sprockets. Forty pieces comprise the work, which have also been painted and lacquered to look like the genuine article.

2015 Triumph Street Triple RX — Naked Daytonafied

09/30/2014 @ 3:39 am, by Jensen Beeler8 COMMENTS

2015 Triumph Street Triple RX    Naked Daytonafied 2015 Triumph Street Triple RX 18 635x423

Building a special edition machine for INTERMOT, the Brits have debuted the 2015 Triumph Street Triple RX, which is based off the Triumph Street Triple R. Borrowing from the Triumph Daytona 675 however, the Triumph Street Triple RX takes many styling points from its supersport cousin, namely the Daytona’s tail section.

Also coming in a matte silver with red accents, the Street Triple RX is channeling heavily on the Daytona, and even has a quickshifter to mimic the Dayton’s sport appeal. At the heart of the machine though is the same 675cc three-cylinder engine, that pumps out 106hp.

Mostly a cosmetic exercise from Hinkley, this is what we get to chew on, since Triumph canned its 250cc sport bike project. 20 high-resolution photos await you after the jump.

MV Agusta Sales Doubled in January & February 2013

03/15/2013 @ 12:11 pm, by Jensen Beeler5 COMMENTS

MV Agusta Sales Doubled in January & February 2013 MV Agusta F3 background 635x400

Some good news from Italy, as MV Agusta is reporting a sales boost so far this year for the Varese brand, with January and February up 100% over the same time period in 2012. “The new year has started well for us regardless of the negative global market trend,” said MV Agusta CEO Giovanni Castiglioni.

“We are very satisfied with our results to date. I’m convinced that they will tend to grow even further thanks to the arrival of the new RIVALE 800, for which we’ve already received many orders. We have good reason to look forward to 2013 with optimism.”

We are more than sure that the doubling in sales has something to do with the previously low volume numbers for the brand, and the nearly 50% increase in the number of models MV Agusta is now offering motorcyclists, three of which are “low price” models: the MV Agusta F3 675, MV Agusta Brutale 675, and MV Agusta Brutale 800.

2013 Triumph Daytona 675R: A Bargain Racer for $13,499

11/13/2012 @ 3:59 am, by Jensen Beeler10 COMMENTS

2013 Triumph Daytona 675R: A Bargain Racer for $13,499 2013 Triumph Daytona 675R 08 635x423

Like the 2013 Triumph Daytona 675, the “R” model of Britain’s three-cylinder supersport has gotten a number of refinements and changes for the new model year. Virtually every aspect of the Triumph Daytona 675 has been seen to, and we won’t rehash those changes here (head over to our article on the base model for the full-monty).

Commanding a $1,900 premium over the base model, the 2013 Triumph Daytona 675R adds a TTX rear shock and NIX30 inverted forks to the mix, along with a new quick shifter, higher-spec Brembo monobloc brakes, and some carbon fiber bits.

Would we spend the extra green for the Daytona 675R over the base model? Yup, but the better question is whether you would buy the Triumph Daytona 675R over the MV Agusta F3. Decisions, decisions, decisions. Look for the 2013 Triumph Daytona 675R in dealerships come February 2013.

2013 Triumph Street Triple R – Loses Weight, Looks Hotter

10/02/2012 @ 5:07 am, by Jensen Beeler21 COMMENTS

2013 Triumph Street Triple R   Loses Weight, Looks Hotter 2013 Triumph Stree Triple R 635x486

Speaking of triples at INTERMOT, Triumph is debuting the 2013 Triumph Street Triple R at the international bike show in Cologne. Using the same 105hp 675cc three-cylinder motor that we know and love, Triumph has revised the Street Triple’s chassis for better handling, and in the process dropped up to 13 lbs off the machine (403 lbs, fueled up and ready to ride).

While the motor remains untouched, Triumph did re-work the exhaust system, reportedly to help meet noise and emissions standard, but the design also helps the Triumph Speed Triple with its mass-centralization. Besides looking the business, the 2013 Triumph Street Triple R comes with switchable ABS as a standard item, as well as an engine immobilizer (also standard). Rounding out the package is a two-year unlimited mileage warranty.

More Photos and Details about the MV Agusta F3

11/01/2010 @ 8:38 am, by Jensen Beeler6 COMMENTS

More Photos and Details about the MV Agusta F3 MV Agusta F3 official photos 64 635x423

The new MV Agusta F3 is supposed to be unveiled until tomorrow, but you wouldn’t know it by the rate at which information is leaking from the Varese-based company. With more photos showing off the lines of the F3, will also get details on its design and mechanics. We already know the MV Agusta F3 will use a compact three-cylinder design for its supersport inspired 675cc motor. Helping achieve that compact design though is a counter-rotating crankshaft, which when combined with the elongated swingarm, should help keep the front wheel down when on the gas.

MV Agusta is also including a variety of electronics for the F3, with ride-by-wire, traction control, and multiple rider-selectable engine maps being available. The chassis is comprised of steel tubing mated to aluminum side panels, while suspension comes from Marzocchi Forks and Sachs shocks. Photos after the jump.

MV Agusta F3: The €9,000 Motorcycle that Castiglioni Hopes Will Save the Company

08/10/2010 @ 5:30 pm, by Jensen Beeler8 COMMENTS

MV Agusta F3: The €9,000 Motorcycle that Castiglioni Hopes Will Save the Company 2011 MV Agusta F3 spy shot 2 635x416

UPDATE: The MV Agusta F3 has officially broken cover.

Italian news site Il Sole 24 Ore sat down with the new owner of MV Agutsa, Claudio Castiglioni, and asked the Italian perhaps the most pertinent question about his new company: what’s next? Striking to the point of things, Castiglioni says much of MV Agusta’s future will depend on the company’s new three-cylinder motorcycles, which the company hopes to sell 10,000 of during the next model year.

Officially now called the MV Agusta F3, Castiglioni was also forthright on some of the details. Already rumored to be a 675cc three-cylinder powered motorcycle, Castiglioni has confirmed this setup along with the fact that there will be at least two price points, with a base and sport model being available.

BMW S600RR Existence Denied – There is No Spoon

05/06/2010 @ 6:07 pm, by Jensen Beeler15 COMMENTS

BMW S600RR Existence Denied   There is No Spoon BMW S600RR concept 560x420

BMW has reported put the kibosh on any rumors that the Bavarian brand is working on a 600cc-ish sportbike to compliment its now wildly popular 2010 BMW S1000RR superbike. MCN is reporting that BMW has acquired the domain name of s600rr.de merely as a defensive IP strategy, and currently has no plans to pursue a follow-up to the S1000RR.