MotoGP Closes Two Crucial Loopholes in Its Rulebook

Heads up GP fans, as the MotoGP Championship is set to close two crucial loopholes in its rulebook for the 2019 season, which the Grand Prix Commission says in its press release are needed in order to keep the sport within the spirit of the rules. The first loophole blandly affects the spec-ECU and its CAN protocol and connection, which is fairly innocuous until you read between the lines of it, while the second concerns the regulation of aerodynamic bodywork, which should be more obvious to regular MotoGP fans.If you will allow us to Tarantino these two rulebook changes, the MotoGP Championship will impose more regulation on aerodynamic bodywork, namely it will remove the loophole that allows manufacturers to change the internal structure of their don’t-call-them-winglets.

Rumors of a New Aprilia RSV4 Begin

This is the 10th year of the Aprilia RSV4 superbike, and despite that duration, the V4 superbike remains one of the top machines that you can stick in your garage. Part of this is due to the fact that the RSV4 is an incredibly well-engineered high-tech motorcycle. After all, it was the first superbike to use an inertial measurement unit (IMU) in conjunction with traction control, and one of the first superbikes to have a ride-by-wire throttle. The other part of Aprilia’s dominance comes down to the fact that the Italian brand has consistently updated the RSV4 every couple of years, helping keep it at the sharp end of the superbike stick. Now if you believe the rumors, the 2019 model year will be no different.

Cameron Beaubier Headed to WorldSBK for 2019?

When you talk to veterans of motorcycle racing about which American could be the next champion at the international level of the sport, one name is almost always included in that very short list: Cameron Beaubier. This is not only because of Beaubier’s status as a two-time MotoAmerica Superbike champion, but also his experience abroad. A promising young rider, Beaubier impressed during the 2007 Red Bull Rookies Cup season, which found him some riders on the international stage before returning to the USA. Now a proven talent on domestic soil, along with his experience abroad, Beaubier is an easy pick to make when looking for Americans to promote to a paddock like the WorldSBK Championship. And now that is exactly the case, with the Cameron Beaubier tipped for ride in World Superbike next season.

More Details on the KTM 790 Adventure R Emerge

The KTM 790 Duke hasn’t even made it to American soil yet — though, it strangely can race in the production middleweight class at Pikes Peak… — and we are already talking about its off-roading sibling, the KTM 790 Adventure R. Built around the same 799cc parallel-twin engine found in the Duke model, the Adventure variant takes things to a whole new level for ADV riders. Promising light weight, plenty of off-road power, and Dakar-inspired chassis components, this should be the adventure-tourer that dual-sport riders have been asking for. With the production version of the KTM 790 Adventure R set to debut later this year at the annual industry trade shows, most of our appetite has been sustained by the prototype bike, which has been making the marketing rounds.

Tom Sykes, Where Will You Be Racing Next Year?

With Jonathan Rea’s future firmly set at the Kawasaki Racing Team, the focus this past weekend at Laguna Seca was on the future of his teammate, Tom Sykes. The Yorkshire man had spared few words in the media for his team and teammate in the days ahead of the California round, and he certainly wasn’t holding too much back once he was at Laguna Seca. You could almost smell the smoke emanating from Sykes, a result of the bridge that was being burned behind him. Sykes is 99.9% not riding with Kawasaki for the 2019 World Superbike Championship season, and he finds himself as one of the top picks in the paddock in the rider market. Chaz Davies is another top rider who is highly sought after in the paddock, and he is likely to remain at Ducati.

Moto2 Builders Out Testing the Triumph Triple

The 2019 Moto2 Championship is rapidly approaching, and next year’s season sees the introduction of a new spec-engine platform. Using a 765cc three-cylinder engine from Triumph, Moto2 competitors have begun testing their new chassis designs for the British triple. Out in Aragon, we get our first glimpse of the front-running race bike providers: Kalex, KTM, and NTS, as well as Triumph’s own test mule, which uses a Daytona 675 chassis. Shaking down their machines ahead of the start of next season, bike manufacturers focused on learning the new race engine and its accompanying spec-ECU. The Kalex was ridden by Moto2 racer Alex Marquez and test rider Jesko Raffin; on the KTM was Julian Simon and test rider Ricky Cardús; and on the NTS was Moto2/MotoGP veteran Alex de Angelis.

Polaris Moving Production to Europe Because of Tariffs?

President Trump’s trade war is about to see another player in the motorcycle industry jump ship from American soil, and this time it is heavyweight Polaris Industries. According to a report by the Minneapolis/St. Paul Business Journal, Polaris is considering moving some of its production capacity to Europe, eyeing a production facility in Poland that would build units for the European market. The move is a direct response to the retaliatory tariffs imposed by the European Union on motorcycle imports, which itself was a response to the Trump Administration’s taxing of steel and aluminum imports.

Here’s Why Suzuki’s New Factory Is Such a Big Deal

One of the more overlooked announcements this week is perhaps one of the bigger ones we have seen in a while, as Suzuki Motor Corp has announced the creation of a new manufacturing plant in Hamamatsu, Japan. The new factory combines engineering, development, engine production, and vehicle assembly into one location, which will streamline operations, increase efficiency, and reduce production costs on Suzuki’s Japanese-made motorcycle models. Over 40 acres in size, the new factory is massive, and it sits in the Miyakoda district of Hamamatsu. Part of a five-year consolidation plan, the new factory replaces an engineering and development facility in Ryuyo; an engine production plant in Takatsuka; and a motorcycle assembly line in Toyokawa.

Take a Look at the Norton Atlas, Another British Scrambler

Today we get another look at Norton’s 650cc project, now named the Norton Atlas. We have already seen concept sketches for this British scrambler, and now Norton is showing us some engineering renders. This is because the physical machine should debut later this year, at the NEC bike show in November. Details are still vague and light, but we do know that the 650cc parallel-twin engine will piggyback off the work done for Norton’s V4 superbike. Essentially the using the V4 engine with its rear cylinders lopped off, the parallel-twin engine shares the same head, pistons, valves, etc as the V4 bike. Several flavors of the Atlas are expected to come to market, with 70hp and 100hp naturally aspirated versions already planned, as well as a supercharged version that is said to clear 175hp.

Limited Edition Celebrates 25 Years of the Ducati Monster

This year marks the 25th year of the Ducati Monster, one of the most iconic motorcycles ever to come out of the Borgo Panigale assembly line. To commemorate this 25-year mark, we have the aptly named Ducati Monster 1200 25° Anniversario. A special edition version of the Italian naked bike, only 500 Anniversario models will be produced for the world’s market, with the highlight being the machine’s tricolore livery and gold frame and wheels. Mostly an aesthetic exercise, the Ducati Monster 1200 25° Anniversario comes with some top-shelf parts, and a number of pieces to make this a unique member of any Ducatisti’s garage. Key features include Öhlins suspension, forged Marchesini wheels, and Ducati’s up/down quickshifter mechanism.

A Panigale-Powerd Ducati Monster Looks Really Good

12/07/2015 @ 12:44 pm, by Jensen Beeler15 COMMENTS

Ducati-1199-Monster-X

I’m not a fan of the Monster line from Ducati. There, I said it. There is just something about the Monster models over the years that has failed to strike me as appealing, though I must say the latest crop of liquid-cooled Monsters has certainly been a step forward for me, visually.

I’m more of a fan of the Ducati Streetfigther lineup, and I still hope that Ducati has a new Streetfighter design somewhere on its design boards. Ideally, such a machine would have a Superquadro engine at its heart, and accordingly make big horsepower numbers that rip our eyeballs from our sockets.

The fate of the Streetfighter line remains to be seen though, and with each passing model year I expect to see the Streetfighter 848 finally leave the Italian company’s lineup. It would seem the Streetfighter is kaput as of the 2016 model year. -JB

As such, the Monster line could be Ducati’s only naked bike model, any year now. So, if time is really against us, and if the Monster really is to be the only naked bike from Ducati, I hope the future iterations take a lesson from this concept.

Continue Reading

Ducati-1199-Panigale-no-fairings-01

If you believe everything you read on the internet, then surely you know that Ducati is allegedly getting ready to release a Panigale-based Streetfighter in the next few months. Another potent rumor making the rounds is that Ducati is working on a totally new v-twin engine, which will meet Euro 4 emission standards.

The first rumor got its start from Visordown, which says that it has received an invitation for press launch in September that will consist of “a track test for a road bike.”

The British publication deduces that the new model must be a sport-oriented machine to warrant the track time for journalists, and the only model in Ducati’s lineup that’s long-in-the-tooth that fits the bill is the Streetfighter 848, and the recently discontinued Streetfighter 1098.

The second rumor comes from Moto-Station, with the French site getting word from a source that Ducati has an all-new Euro 4 compliant engine that it will debut at EICMA this November. They go on to speculate that the engine could have Ducati Variable Timing (DVT), and would fit a sport-touring bike.

Let’s examine these two rumors a bit further, in turn.

Continue Reading

2015-Ducati-Streetfighter-848-01

The Ducati Streetfighter lives for another year, as Ducat is showing off the Ducati Streetfighter 848 as a 2015 model year machine at the EICMA show in Milan.

There had been doubts about the Streetfighter 848 continuing to be a part of the Ducati lineup going forth, especially as the Italian company has moved away from the 849cc v-twin platform, favoring the 821cc engine variations for the Hypermotard the Monster lines, and the 899cc Superquadro for the Panigale.

Continue Reading

What happens when you release the most anticipated, and we’d argue the most important, superbike in the company’s history? Well you have a record month of sales, of course. It should be unsurprising then that Ducati North America posted a 49% sales growth last month, making May 2012 the company’s best month ever sales-wise. Ducati North America pushed 1,782 units in May, for a total of 4,844 units sold in January thru May (up 19% over 2011, and 98% over 2010).

Continue Reading

CAD Drawings of the Ducati Streetfighter 848

04/11/2012 @ 5:42 pm, by Jensen Beeler9 COMMENTS

Overall, our impressions of the 2012 Ducati Streetfighter 848 was that the new baby Fighter from Ducati, is a well-improved upon successor to the original Ducati Streetfighter 1098. Helping differentiate the SF848 from the higher-spec, though otherwise identical, Streetfighter 1098 S, the Streetfighter 848 takes the geometry from the Ducati Superbike 848, which means it gets a much-better handling 24.5° rakes. Ducati has also brought over the Testastretta 11° engine, which made its first debut on the Ducati Multistrada 1200, and then found its way onto the Ducati Diavel.

Smoother and easier to operate, the new Streetfighter’s 849cc motor may be down on power compared to its Superbike counterpart (132 hp at its peak, compared to the Superbike 848 EVO’s 140hp), but the SF848 has a much flatter torque curve and a power band that extends into a more useable range for urban and aggressive street riding. When compared to its predecessor, just about the only thing we don’t like about the Ducati Streetfighter 848 is the foot clearance issue with the shotgun exhaust, which limits the movement of a rider’s right foot on the Streetfighter’s peg.

Releasing these CAD drawings at the 2012 Ducati Streetfighter 848 US press launch, maybe some eagle-eyed industrial designers can come up with a solution for this reporter’s kneecap. CAD renders after the jump.

Continue Reading

Ride Review: Ducati Streetfighter 848

04/06/2012 @ 1:28 pm, by Jensen Beeler11 COMMENTS

An amalgamation of three already existing Ducati models, there is nothing surprising about the Ducati Streetfighter 848. A pick-and-pull creation from the Ducati engineering bay, the Streetfighter 848 draws upon the precedence defined by the Ducati Streetfighter 1098, the Ducati Superbike 848, and the Ducati Multistrada 1200.

A mirror image of the more well-endowed Streetfighter 1098, the Streetfighter aesthetic has been in the public eye since its Milan unveiling in 2008. Like its predecessor, the Streetfighter 848 is based off its Superbike counterpart, and shares the six-year old Ducati Superbike 848’s chassis geometry and namesake. At the heart of the baby Fighter is an 849cc Testastretta 11° engine, and as the name implies, the motor features the same power-smoothing 11° valve overlap architecture that first debuted on the Ducati Multistrada 1200, and has since carried forth with the Ducati Diavel.

We have seen before all the elements that comprise the 2012 Ducati Streetfighter 848, and indeed there is nothing revolutionary about Ducati’s latest street-naked, so it begs the question: is the Ducati Streetfighter 848 merely the sum of its parts? Or is it something more? Continue onward as we explore that question further.

Continue Reading

Ducati Streetfighter 848 Mega Gallery

04/04/2012 @ 12:46 pm, by Jensen Beeler24 COMMENTS

Since we are out in the Palm Desert testing the 2012 Ducati Streetfighter 848 today, we figured we might as well post a bevy of photos of the tiny Fighter. Coming with Ducati’s traction control system (DTC), and an 848cc/132hp version of the Testastretta 11° engine, the Streetfighter 848 promises to be more than just a smaller version of the original specimen. Other changes include a refined chassis as well as the infamous Ducati wet clutch, which some say is better than the company’s iconic dry-clutch design (gasp!). While we put the Ducati Streetfighter 848 through its paces today, and see if all these rumors are true, enjoy the 40+ photos we have for you after the jump.

Continue Reading

Gone Riding: Ducati Streetfighter 848

04/04/2012 @ 9:33 am, by Jensen Beeler9 COMMENTS

Things will be a little slow on Asphalt & Rubber today, as we are in the Palm Desert testing the new Ducati Streetfighter 848. We’ll be spending most of the day playing with its revised chassis & traction control, and getting used to the baby Fighter’s wet clutch & Testastretta 11° engine. You can follow our thoughts on the bike live via Twitter, and our last five tweets will automatically display here on this post.

Continue Reading

Photos and Video of the Ducati Streetfighter 848

09/29/2011 @ 7:19 am, by Jensen Beeler12 COMMENTS

Now that the European press launch of the 2012 Ducati Streetfighter 848 is over (we’ll have to wait a bit longer for the US press launch…le sigh), some more professional photos and a video of the new middleweight Streetfighter have hit the interwebs. Of course Ducati is really pushing the revitalization of the Italian yellow paint scheme, but we think the matte black “Dark Stealth” version will turn a few heads, and admittedly, this author wishes his Streetfigher 1098 had the red frame on the Rosso Corsa version of the Streetfighter 848.

At $12,995 MSRP, the Ducati Streetfighter 848 is $1,000 cheaper than the Superbike 848 from which it gains its roots (and shares the $13k price point with the Superbike 848 “Dark”). With the added benefit of Ducati Traction Control (DTC) and a 132hp Testastretta 11° motor with longer service intervals, Ducati has refined the Streetfighter 848 to be more civil for its for its urban hooligan duties, while maintaining an appropriate amount of uncouthed sensibility. 19 photos and a video after the jump.

Continue Reading

Ducati has released pricing and power specs for the 2012 Ducati Streetfighter 848 here in the US, and the fighter’d version of the Superbike 848 is interestingly priced at $12,995 MSRP, the same price as the Superbike 848 EVO “Dark” or $1,000 less than the colored Superbike 848 EVOs, which retail for $13,995. Making 8hp less than the current Superbike 848 EVO, the Ducati Streetfighter 848’s motor makes 132hp and 69 lbs•ft of torque on Ducati’s dynos, just 23hp shy of the current Streetfighter 1098. Additionally, the Ducati Streetfighter 848 will tip the scales at 373 lbs dry (439 lbs wet), the same weight figure quoted for the current Ducati Streetfighter 1098.

As we stated when the Ducati Streetfighter 848 first broke cover, the positioning on the smaller Streetfighter was going to be critical and difficult for Ducati. The Bologna brand not only has to balance the the Streetfighter 848 against the Superbike 848 EVO, but also against the Monster 1100 EVO as well, which retails for $11,995. With the Streetfighter 848 getting lower-spec suspension and brakes compared to the Superbike 848 EVO (along with a presumably smaller airbox resulting in less power), Ducati seems to be hoping that the standard traction control on the SF848 will help distinguish the Streetfighter from its Superbike compatriot, which has no Ducati Traction Control (DTC) option.

Continue Reading