Rumors of a New Aprilia RSV4 Begin

This is the 10th year of the Aprilia RSV4 superbike, and despite that duration, the V4 superbike remains one of the top machines that you can stick in your garage. Part of this is due to the fact that the RSV4 is an incredibly well-engineered high-tech motorcycle. After all, it was the first superbike to use an inertial measurement unit (IMU) in conjunction with traction control, and one of the first superbikes to have a ride-by-wire throttle. The other part of Aprilia’s dominance comes down to the fact that the Italian brand has consistently updated the RSV4 every couple of years, helping keep it at the sharp end of the superbike stick. Now if you believe the rumors, the 2019 model year will be no different.

Cameron Beaubier Headed to WorldSBK for 2019?

When you talk to veterans of motorcycle racing about which American could be the next champion at the international level of the sport, one name is almost always included in that very short list: Cameron Beaubier. This is not only because of Beaubier’s status as a two-time MotoAmerica Superbike champion, but also his experience abroad. A promising young rider, Beaubier impressed during the 2007 Red Bull Rookies Cup season, which found him some riders on the international stage before returning to the USA. Now a proven talent on domestic soil, along with his experience abroad, Beaubier is an easy pick to make when looking for Americans to promote to a paddock like the WorldSBK Championship. And now that is exactly the case, with the Cameron Beaubier tipped for ride in World Superbike next season.

More Details on the KTM 790 Adventure R Emerge

The KTM 790 Duke hasn’t even made it to American soil yet — though, it strangely can race in the production middleweight class at Pikes Peak… — and we are already talking about its off-roading sibling, the KTM 790 Adventure R. Built around the same 799cc parallel-twin engine found in the Duke model, the Adventure variant takes things to a whole new level for ADV riders. Promising light weight, plenty of off-road power, and Dakar-inspired chassis components, this should be the adventure-tourer that dual-sport riders have been asking for. With the production version of the KTM 790 Adventure R set to debut later this year at the annual industry trade shows, most of our appetite has been sustained by the prototype bike, which has been making the marketing rounds.

Tom Sykes, Where Will You Be Racing Next Year?

With Jonathan Rea’s future firmly set at the Kawasaki Racing Team, the focus this past weekend at Laguna Seca was on the future of his teammate, Tom Sykes. The Yorkshire man had spared few words in the media for his team and teammate in the days ahead of the California round, and he certainly wasn’t holding too much back once he was at Laguna Seca. You could almost smell the smoke emanating from Sykes, a result of the bridge that was being burned behind him. Sykes is 99.9% not riding with Kawasaki for the 2019 World Superbike Championship season, and he finds himself as one of the top picks in the paddock in the rider market. Chaz Davies is another top rider who is highly sought after in the paddock, and he is likely to remain at Ducati.

Moto2 Builders Out Testing the Triumph Triple

The 2019 Moto2 Championship is rapidly approaching, and next year’s season sees the introduction of a new spec-engine platform. Using a 765cc three-cylinder engine from Triumph, Moto2 competitors have begun testing their new chassis designs for the British triple. Out in Aragon, we get our first glimpse of the front-running race bike providers: Kalex, KTM, and NTS, as well as Triumph’s own test mule, which uses a Daytona 675 chassis. Shaking down their machines ahead of the start of next season, bike manufacturers focused on learning the new race engine and its accompanying spec-ECU. The Kalex was ridden by Moto2 racer Alex Marquez and test rider Jesko Raffin; on the KTM was Julian Simon and test rider Ricky Cardús; and on the NTS was Moto2/MotoGP veteran Alex de Angelis.

Polaris Moving Production to Europe Because of Tariffs?

President Trump’s trade war is about to see another player in the motorcycle industry jump ship from American soil, and this time it is heavyweight Polaris Industries. According to a report by the Minneapolis/St. Paul Business Journal, Polaris is considering moving some of its production capacity to Europe, eyeing a production facility in Poland that would build units for the European market. The move is a direct response to the retaliatory tariffs imposed by the European Union on motorcycle imports, which itself was a response to the Trump Administration’s taxing of steel and aluminum imports.

Here’s Why Suzuki’s New Factory Is Such a Big Deal

One of the more overlooked announcements this week is perhaps one of the bigger ones we have seen in a while, as Suzuki Motor Corp has announced the creation of a new manufacturing plant in Hamamatsu, Japan. The new factory combines engineering, development, engine production, and vehicle assembly into one location, which will streamline operations, increase efficiency, and reduce production costs on Suzuki’s Japanese-made motorcycle models. Over 40 acres in size, the new factory is massive, and it sits in the Miyakoda district of Hamamatsu. Part of a five-year consolidation plan, the new factory replaces an engineering and development facility in Ryuyo; an engine production plant in Takatsuka; and a motorcycle assembly line in Toyokawa.

Take a Look at the Norton Atlas, Another British Scrambler

Today we get another look at Norton’s 650cc project, now named the Norton Atlas. We have already seen concept sketches for this British scrambler, and now Norton is showing us some engineering renders. This is because the physical machine should debut later this year, at the NEC bike show in November. Details are still vague and light, but we do know that the 650cc parallel-twin engine will piggyback off the work done for Norton’s V4 superbike. Essentially the using the V4 engine with its rear cylinders lopped off, the parallel-twin engine shares the same head, pistons, valves, etc as the V4 bike. Several flavors of the Atlas are expected to come to market, with 70hp and 100hp naturally aspirated versions already planned, as well as a supercharged version that is said to clear 175hp.

Limited Edition Celebrates 25 Years of the Ducati Monster

This year marks the 25th year of the Ducati Monster, one of the most iconic motorcycles ever to come out of the Borgo Panigale assembly line. To commemorate this 25-year mark, we have the aptly named Ducati Monster 1200 25° Anniversario. A special edition version of the Italian naked bike, only 500 Anniversario models will be produced for the world’s market, with the highlight being the machine’s tricolore livery and gold frame and wheels. Mostly an aesthetic exercise, the Ducati Monster 1200 25° Anniversario comes with some top-shelf parts, and a number of pieces to make this a unique member of any Ducatisti’s garage. Key features include Öhlins suspension, forged Marchesini wheels, and Ducati’s up/down quickshifter mechanism.

Harley-Davidson Moving Production Because of Trade War

We have already reported on the European Union’s 25% tariff increase (6% to 31%) on American-made motorcycles, and how those import taxes are going to affect in particular Harley-Davidson. The short version: not well. Seeing that writing on the wall, Harley-Davidson has responded to Europe’s retaliatory tariffs, though it is perhaps not the response that the American government was hoping for when it began taxing aluminum and steel from European Union member states. As such, Harley-Davidson plans to shift its production for motorcycles destined to the European market from its factories in the United States to it facilities abroad.

For the 2018 model year, Kawasaki continues to develop its superbike package. As such, the 2018 Kawasaki Ninja ZX-10R SE brings some special new features, to earn those extra letters after its name.

The big addition is the new Showa electronic suspension, which is the only semi-active suspension system on motorcycles that includes built-in stroke sensors.

These stroke sensors are able to measure the movement of the fork and shock internals, allowing Showa’s suspension to measure and change its damping settings on the fly, as you ride.

The Kawasaki Ninja ZX-10R SE also gets the forged aluminum wheels found on Kawasaki’s homologation-spec superbike, the Ninja ZX-10RR, which should help the Ninja ZX-10R SE feel more nimble on the race track, despite its 459 lbs wet weight.

Peak horsepower remains at a quoted 197hp, disappointingly, though shifting through the gears should be easier, as another item for the SE model, taken straight off the Kawasaki Ninja ZX-10RR, is Kawasaki’s up-and-down quickshifter.

Continue Reading

2017-mv-agusta-brutale-800-rr-05

When we rode the MV Agusta Brutale 800 earlier this year, we called it the best motorcycle ever to come out of Varese, Italy. The current Brutale 800 is finally a motorcycle that comes from fully baked from the MV Agusta factory, and it shows what the Italian company can accomplish.

Riding through the MV Agusta Brutale 800 at the press launch, our only lament was our desire for more power from the 800cc three-cylinder engine. Thankfully, the Italians have heard our request.

Debuting at the EICMA show in Milan, the 2017 MV Agusta Brutale 800 RR comes with all the refinements we praised in the Brutale 800 model, and adds a 140hp peak power figure to the mix (63 lbs•ft @ 10,100 rpm), along with new forged wheels and updated electronics.

Continue Reading

KTM 1290 Super Duke R Gets an Update for 2017

11/08/2016 @ 4:37 am, by Jensen Beeler29 COMMENTS

2017-ktm-1290-super-duke-r-static-05

Call it The Beast 2.0, because the KTM 1290 Super Duke R is getting an upgrade for the 2017 model year, debuting today at the EICMA show in Milan, Italy.

The first most noticable change is the new LED headlight, which will debut throughout the Duke line, and draws links to KTM’s remodeled Adventure bikes, which have a similar LED setup.

KTM has also modified the TFT dash, which seems like a minor change, except the old version always made the streetfighter feel cheaper than its price tag suggested. The new dash richens the user experience with its look and feel, and is a welcomed addition to the 2017 KTM 1290 Super Duke R.

Of course, the change your most interested in is the revised 1,301cc v-twin engine, which has a reworked cylinder head and intake, and now produces 177hp. Cornering ABS from Bosch has also been added, with the IMU also helping control the traction control system.

Continue Reading

More Photos of the 2017 Yamaha YZF-R6

10/13/2016 @ 10:00 am, by Jensen Beeler18 COMMENTS

2017-yamaha-yzf-r6-high-resolution-25

Loyal Asphalt & Rubber readers will know how much we like our high-resolution photos here at A&R, so we wanted to make sure you could get a good high-res look at the 2017 Yamaha YZF-R6 that debuted today at the AIMExpo in Orlando, Florida.

Yamaha has left its class-leading bike mostly unchanged for the next model year, when it comes to the R6 motor and chassis, which might disappoint some. But with the addition of R1-inspired styling, traction control, ABS brakes, and better suspension pieces, we think supersport fans will be pleased with this update.

With the bar now set higher in the 600cc realm, hopefully we will see other manufacturers take up the challenge, and the supersport class will have new life breathed into it.

We’ll have to wait and see on that. Until then, enjoy this modest photo gallery.

Continue Reading

2017-yamaha-yzf-r6-blue-03

The wait is finally over, as the 2017 Yamaha YZF-R6 debuted today at the AIMExpo in Orlando, Florida. As expected, the new Yamaha R6 visually borrows from the recently updated R1, with a similar headlight and intake setup featuring now on both machines.

On the technical side of things, the 2017 Yamaha R6 is more evolution than revolution, with the basic chassis and engine configuration staying the same.

However, updates for 2017 include a revised suspension package, ABS brakes, riding modes via ride-by-wire, traction control, and an optional quickshifter.

Continue Reading

BMW K1600B – Germany’s Six-Cylinders of Bagger

10/11/2016 @ 5:40 am, by Jensen Beeler17 COMMENTS

2017-bmw-k1600b-bagger-01

We’ve expect for some time to see BMW Motorrad debut a bagger model, based off its K1600 touring bike platform, and now the wait is over. The attractive BMW Concept 101 teased this much to us, and today that speculation can be put to rest, with the release of the 2017 BMW K1600B.

Like the Honda Gold Wing F6B, the concept behind this six-cylinder motorcycle here is pretty simple, and its hope is to go after a large motorcycle segment that is dominated by one brand: Harley-Davidson.

As has been BMW’s playbook for the 2017 model year, the K1600B floods a space that BMW is already a heavy-hitter in, offering even more options to riders who are looking to pound some pavement, this time with some bagger appeal.

Helping make that appeal, BMW’s inline-six engine will make 160hp for the 2017 model year, thanks to Euro 4 regulations. The BMW K1600B will also see a 2.75″ seat height drop, fixed side cases (hence the “bagger” name), and various subtle styling changes from the GT/GTL models.

Continue Reading

BMW S1000R Gets Refinements for 2017

10/05/2016 @ 2:35 am, by Jensen Beeler11 COMMENTS

2017-bmw-s1000r-05

As we reported before the INTERMOT show, the 2017 BMW S1000R will see an update over this year’s model, namely getting an updated chassis, more powerful motor, Euro 4 homologation, and a minor weight reduction.

The new chassis of course comes from the 2015 BMW S1000RR, and helps the streetfighter drop 2kg from its curb weight. The street-tuned inline-four engine gets a modest increase of 5hp, for a peak power figure of 165hp.

Long distance riders will enjoy BMW’s new “vibration free” handlebars, which address one of the complaints made by owners of the previous model. Another requested item has been added as well: the HP Shift Assistant Pro, for quick shifting up and down without clutch.

Continue Reading

2017-yamaha-mt-10-sp-europe-studio-09

What you’re looking at is the 2017 Yamaha MT-10 SP, a new edition of Iwata’s crossplane-power streetfighter. Despite being just a few bolted-on parts, the Yamaha MT-10 SP is one of the more interesting machines to debut in INTERMOT today.

This is because it pits the Yamaha MT-10 directly against the streetfighter offerings from the European brands – something that was already occurring with the MT-10/FZ-10, even if it was unintended.

The Yamaha MT-10 SP though gives the Japanese a more proper machine to go toe-to-toe with the likes of the Super Duke R, Tuono V4 1100, and other models.

Continue Reading

2017 Suzuki GSX-R1000R – A Two-Pronged Approach

10/04/2016 @ 5:12 am, by Jensen Beeler37 COMMENTS

2017-suzuki-gsx-r1000-01

No, that extra R in GSX-R1000R isn’t a typo – Suzuki is releasing two versions of its superbike at INTERMOT today, the 2017 Suzuki GSX-R1000R being the higher spec model for track enthusiasts.

Available later in mid-2017, the Suzuki GSX-R1000R takes the already robust package that is the Suzuki GSX-R1000, and adds to it an up-and-down quickshifter, launch control, and cornering ABS feature set.

The suspension has also been upgraded, with the 2017 Suzuki GSX-R1000R getting the very noticeable Showa Balance Free forks (note the gas cartridge on the fork bottom), and the Showa Balance Free Rear Cushion rear shock, which is an interesting piece of kit, since Showa says the design does away with the need for separate high-speed and low-speed compression adjustment.

The last item of difference, besides the price of course, is that the 2017 Suzuki GSX-R1000R includes a lighter triple tree top clamp.

Continue Reading

2017-kawasaki-ninja-zx-10rr-04

Before INTERMOT this year, Kawasaki USA sent out a cautionary email that Kawasaki bikes debuting at trade show in Germany would be for the European market only, and that those bikes coming to the USA would debut later next month.

So, we can’t say for certain for our North American readers that the 2017 Kawasaki Ninja ZX-10RR will be crossing the pond, but for our European compatriots, here is a new superbike that should get your motor really running.

A byproduct of the World Superbike rules, the 2017 Kawasaki Ninja ZX-10RR is a homologation special, of which only 500 units will be made for public consumption.

To get that extra “R” on its name, the folks at Kawasaki have taken their already stout ZX-10R superbike, and massaged in some pretty choice engine, chassis, and electronic upgrades.

Continue Reading