Last week we got a leaked photo of the 2010 MotoCzysz E1pc, and knew the bike would be a contender in today’s TT Zero at the Isle of Man. Now that the TT for electrics is over, we can get a closer look at the machine that left the competition behind in the dust. MotoCzysz was a scratch at last year’s TT, and following that mantra the team effectively started-over from scratch for their 2010 effort. Back for 2010, there is of course the familiar MotoCzysz-designed 6X Flex front-end suspension system, but the rest of the bike centers around a revised energy package that’s been refined to engineering simplicity.
We’ve already covered how the central “suitcase” or eDD incorporates space maximizing v-shaped removable battery packs that pop-out with the push of a button. And how the entire 2010 MotoCzysz E1pc involves virtually no wiring, since everything dovetails perfectly together. We’ve also covered how the MotoCzysz D1-10 motor is replacing the three Agni motors from last year’s bike. Running off nearly 500 volts of power, the liquid-cooled IPM motor makes 250lbs•ft of torque, and generates over 100hp. The aerodynamics of the 2010 bike have been completely rethought, and employ a palatable design that achieves the aerodynamic goals to give the team a greater advantage with their limited on-board energy.
All of this is well and good, but it doesn’t mean shit if the bike doesn’t go fast.
Our Bothan Spies were hard at work this weekend, and have brought us this photo of the 2010 MotoCzysz E1pc that will be racing the TT Zero at the Isle of Man TT. From the pictures, the 2010 E1pc is sporting a significantly smaller tail (no hidden batteries here!), and a bevy of battery packs.
From what we can gather, there’s 12.5 kWh of battery power visible, assuming Czysz & Co. are using the same packs from the eDD. The front-end is the same MotoCzysz-patented design, while the rear of the motorcycle looks to have a longer swing-arm and conventional shock placement.
While the video of MotoCzysz putting their new D1-10 electric motor up on the dyno is not terribly captivating (it’s hard to see anything really moving since all the fun bits are inside the motor’s casings), the performance figures the company quotes surely are impressive. The liquid-cooled IPM motor makes 250lbs•ft of torque, generates over 100hp, and employs a proprietary cooling system to allow a higher percentage of that peak power to be used over extended periods of time. This is particularly important because of the large gap between peak power figures and sustainable power figures in the electric motorcycle world, with the latter being the more important figure to quote.
In an industry that rethinks motorcycles from the ground up, the biggest paradigm shift has been left out by all but a few teams and manufacturers. Looking for the next generation in motorcycle chassis design, Asphalt & Rubber recently got to sit down with Michael Czysz to get an up-close look at the 2009 MotoCzysz E1pc electric motorcycle, and also got a sneak peak at the 2010 frame and chassis. As one of the few entities to rethink how a motorcycle should be design and produced, Czysz’s insights into his design give a glimpse as to what the next 100 years of motorcycle evolution will look like.
Today MotoCzysz is announcing its Electric D1g1tal Dr1ve (eDD), better known to us as “the suitcase”, which is essentially the housing for the E1pc’s proprietary controller, motor, and batteries. MotoCzysz will be using the eDD on their 2010 E1pc D1g1tal Superbike, and intends on letting other teams use the suitcase as well, helping fill the grid at electric motorcycle races.
This announcement is important on a variety of levels, and most electric motorcycling enthusiasts will be interested to get their first glimpse at technology beind Michael Czysz’s 2010 E1pc D1g1tal Superbike, which will for sure be at the TT Zero race at the Isle of Man this year. The suitcase contains MotoCzysz proprietary battery, motor, and controller designs, which are setting the bar higher in electric motorcycle racing.