Latest Posts:
Asphalt & Rubber
Author

Jensen Beeler

Browsing
Racing

European Junior Cup Will Use the Honda CBR500 for 2013

By 9 COMMENTS

If you wanted further proof that Honda is getting ready to debut a 500cc CBR, look no further than the fact that the 2013 European Junior Cup has been tipped to switch from the KTM 690 Duke to the Honda CBR500 when the middleweight sport bike debuts next month at EICMA.

A cheap way to get young racers honing their skills on the track, the European Junior Cup is an ideal venue for the Honda CBR500, which is expected to differentiate itself from the CBR600RR by being a less-sporty entry-level machine for newer riders.

Keep Reading
By
Racing

Provisional World Superbike Calendar for 2013 Released

By 5 COMMENTS

At Magny-Cours this weekend, World Superbike released its provisional calendar for the 2013 WSBK Championship. Subject to some change, maybe more so now that Dorna is in charge of things, the big changes to the 2013 calendar over this season is the addition of a round in India, as well as the American round moving from Miller Motorsports Park to Laguna Seca.

World Superbike returns to Russia again for 2013, helping the series branch out a bit from the Western Europe centrality. Along that same vein, both Misano and Brno are absent from the 2013 calendar, with the second race in June still to be announced.

We would expect Brno to get filled-in at this slot, since the Eastern Europe circuit has the right geography, solvency, and attendance support when compared to the Italian track. However, as always, time will tell. The 2013 World Superbike Provisional Calendar for 2013 is after the jump.

Keep Reading
By
Racing

How to Lose $4,500 in Single Corner – AKA “The Pass” Between Tyler O’Hara & Michael Barnes at NOLA

By 43 COMMENTS

Whether your poison is World Superbike or AMA Pro Racing, this weekend provided some excellent motorcycle racing. Out of all the memorable moments where we yelled at the TV this race-day Sunday (and there were more than a few), our favorite, hands-down, has to be “the pass” that Tyler O’Hara pulled on Michael Barnes coming down the final stretch at NOLA.

Full-throttle on the Harley-Davidson XR1200 race bikes for the win, a race that would also who would win AMA Pro Racing XR1200 Championship, O’Hara pulled a classic move on Barney — no really, he pulled Barnes back by the arm just ahead of the finish line.

It is debatable whether O’Hara would have caught Barnes on the drive to the finish, and both riders have a good on-track rivalry, and off-track sense of humor, but Barnes was clearly not pleased with O’Hara’s race shenanigans (we think it is sort of winning, in the Charlie Sheen sense of the word).

Nonetheless, the AMA ruled it an “avoidable contact” and displaced O’Hara from 1st to last in the race, which sent him into third place for the Championship points.

In other words, Tyler O’Hara lost $4,500 dollars in prize money ($2,000 for second in the race, $2,500 for the drop from second to third in the Championship), while perpetrating one of most awesome/punk-kid moves we have ever seen in motorcycle racing. The video of “the pass” is after the jump. Leave your thoughts in the comments.

Keep Reading
By
Opinion/Editorial

How 3D Printing Is Going To Change Motorcycling

By 29 COMMENTS

For the past few weeks or so, I have been conversing back-and-forth with my cousin-in-law about 3D printing. Apparently, some sort of hobbyist 3D printing shop has opened in his home town of Pasadena, and my geekier-than-me relative has been chomping at the bit to see what the consumer-level 3D printers can build.

Since my special brand of geekiness has already assured that the bloodline stops at my branch of the family tree, you can imagine the uber-nerd fest we both have been having, trading links on Facebook about the different things that rapid-prototype machines and 3D printers can achieve.

For those who are not familiar with the technology, the name really does give away about 90% of the special sauce. Using a plastic in lieu of ink, 3D printer can actually build three-dimensional objects in a process not that dissimilar to your home ink jet printer (Jay Leno has been using 3D printing to replace impossible-to-find parts for his classic car collection).

The more robust and industrial units use lasers to shape and heat the plastic ink, and are able to achieve a high-degree of object resolution. We can think of more than a few electric motorcycle startups that are currently using this rapid-prototyping process to develop their street and race bikes. It’s very fascinating, but also very expensive stuff.

This is where the consumer side of the equation comes in, as the post-industrial form of 3D printing has not only rapidly increased in its ability to flawlessly create a high-resolution object, but the cost of both the 3D printer and its “ink” have dramatically dropped. Hobbyist models are now in the $400-$2,000 range, and could soon be as ubiquitous as the printer sitting next to the computer you are using to read this article.

As the price-point drops and resolution increases further, the consumer end of this technology could rival the industrial side of 3D printing, and that is where things get real interesting for the motorcycle industry, and manufacturing in general.

Keep Reading
By
Racing

Honda WSBK Switches to 2013 Livery for Magny-Cours

By 10 COMMENTS

We’re not sure who is behind the liveries for Honda Europe’s racing department, but they do a damn fine job of creating simple, understated, and gorgeous race graphics. Channeling some more of that Honda RC30 goodness, HRC is also the second team to adopt the faux-headlights that World Superbike will mandate for bikes in the 2013 season.

While the graphics might be different for 2013, the machine certainly isn’t. Jonathan Rea and Leon Haslam will have their work cutout for them next season, especially since we hear that the WSBK-spec Honda CBR1000RR is a bit of handful, as Hiroshi Aoyama can attest to (his bike is pictured above).

With Rea said to have opted to stay in WSBK, instead of a move into MotoGP, the Ulsterman has really been the only rider that can decipher the CBR’s code, and after seeing his performance at Misano and Aragon, we think that’s more of testament to Rea’s skill, than a fluke match between man and machine.

Hopefully things will get better in 2014, when Honda’s V4-powered homologation special hits the streets.

Keep Reading
By
Bikes

2013 Suzuki GSX-R1000 “One Millionth” Special Edition

By 40 COMMENTS

In its 27 years of GSX-R branded motorcycles, Suzuki has sold over one million of the peppy sport bikes around the world. Helping commemorate that feat, Suzuki debuted at Intermot this week the 2013 Suzuki GSX-R1000 “One Millionth” Special Edition model, which will be sold in limited quantities (1985 units, to be precise).

Made distinct with its red nose cone and special paint scheme, the 2013 “Millionth Edition” Commemorative GSX-R1000 also comes with black Brembo Monoblock callipers with gold lettering, wheel stripes, gold forks, a celebratory tank graphic, a numbered top yoke, red fork tops, and a special key ring.

No word on what pricing will be, or whether the special edition Suzuki GSX-R1000 will make it to North America. But considering that many of those million GSX-R motorcycles produces landed on American soil, you would think the “Millionth Edition” Commemorative Suzuki GSX-R1000 would as well.

Keep Reading
By
News

69 Photos of the 2013 Ducati Multistrada 1200

By 6 COMMENTS

The new Ducati Multistrada 1200 is a lot like the old Ducati Multistrada 1200, but we figured there are enough Ducatisti trolling the pages of A&R that a little moto porn wouldn’t hurt things too much. Gone is the Ducati Multistrada 1200 S Sport, which has essentially be replaced by the Ducati Multistrada 1200 S Pikes Peak bike (which looks a-mazing).

The whole line benefits from the Testastretta 11° DS engine, which features a dual-spark ignition system that gives the MTS1200 a slight mid-range power boost, as well as the LED low-beam headlights. However, the real changes occur at the “S” trim level, which are the first bikes from Bologna to get the Ducati Skyhook Suspension (DSS) semi-active suspension package.

The last big change to the Multistrada line is the addition of the Ducati Multistrada 1200 S Grantourismo, which has some more kit for you if the Ducati Multistrada 1200 S Touring isn’t touring enough for you. One-hundred-twenty-one liters of panniers and top case, the Grantourismo also has crash bars, LED fog lights, and a larger windscreen for its extra $2,000 over the Touring model.

We were thoroughly impressed with the original Multistrada 1200 when it came out in 2010, and the updates to the 2013 line seem compelling enough to keep Ducati in the mix for adventure riders who are looking for something a little bit more sporty than the 2013 BMW R1200GS and 2013 KTM 1190 Adventure.

While both the BMW and KTM are attractive machines in their own right, it is hard to beat that Italian sense of style. As such, sixty-nine high-res photos of the 2013 Ducati Multistrada 1200 model line are waiting for you after the jump.

Keep Reading
By
News

Harley-Davidson Has Pope Bless Fuel Tanks – No, Seriously

By 21 COMMENTS

Harley-Davidson is in Italy this week, gearing up for the company’s 110th Anniversary event that’s being held in Rome in June 2013. Apparently part of the pre-party planning involved having Pope Benedict XVI bless two fuel tanks today, with brand ambassador Willie G. Davidson present. This is of course a practice run for the full-bike blessing that will take place next year in St. Peter’s square.

We were going to write a tongue-in-cheek article about how we have never seen a company get as excited about a 110th anniversary celebration (though, there should be some sort of record for making the same motorcycle for that long of a time period), and maybe lace it with some choice idealogical wordplay, but honestly the press release from Harley-Davidson provides ample fodder for the cynics without our help. And here we thought the Pope was more of a Ducati guy…

Keep Reading
By
News

KTM 1190 Adventure Pricing Starts at €13,990

By 3 COMMENTS

Feeling the age of the KTM 990 Adventure & KTM 990 Adventure R, the Austrians debuted at Intermot this week their new adventure-touring machines, the 2013 KTM 1190 Adventure & 2013 KTM 1190 Adventure R. Using a revised version of the KTM 1190 RC8 R’s v-twin motor, both bikes feature 148 hp, and clocks in around 230 kg (507 lbs) fully tanked and ready to go ride.

Debuting along side the new water-cooled 2013 BMW R1200GS, KTM has its work cutout for it in the adventure-touring segment, though with Suzuki debuting the concept for its 2014 Suzuki V-Strom 1000, now is certainly a good time to be in the market for an ADV bike. Feeling that notion, KTM has released the pricing on its Adventure bikes, and we like what we see from the Austrians.

Keep Reading
By
Bikes

2013 Suzuki Hayabusa Gets ABS & Brembo Brakes

By 17 COMMENTS

It’s hard to believe that for over a decade, the Suzuki Hayabusa has gone relatively unchanged from its original form. Sure, there have been some updates — a nose-job here, a face-lift there, but let’s be honest, the engineer responsible for the Suzuki GSX1300R has mostly just been pushing paper around his desk since the Clinton administration.

That tradition has not come to a close for the next model year, though the 2013 Suzuki Hayabusa does get some massaging from the Japanese brand. Updated with an anti-locking brakes system (ABS), the 2012 Suzuki GSX1300R, as it name implies, joins the rest of the GSX-R family in getting Brembo Monobloc calipers.

Keep Reading
By
Bikes

53 Photos of the 2013 Kawasaki Ninja Z800 & Z800e

By 15 COMMENTS

We already knew well ahead of the INTERMOT show that Team Green would debut the Kawasaki Ninja Z800, a bike that replaces the best-selling sport-naked in the Europe: the Kawasaki Ninja Z750. Featuring an 806cc inline-four motor, the new Z800 comes in two flavors: the 2013 Kawasaki Ninja Z800 & the 2013 Kawasaki Ninja Z800e. The Kawasaki Ninja Z800 makes 111hp and 61 lbs•ft of torque, while the Kawasaki Ninja Z800e gets a bit more watered down with 94hp and 56 lbs•ft of torque, though it saves 6 lbs over its more burly counterpart.

The two-pronged model approach by Kawasaki is surely being done to better capture a wider audience with the Ninja Z800 line, which also explains why the 2013 Kawasaki Ninja Z800e comes with a 47hp A2 license compliant option as well. Designed to be at home on the set of the next Transformers movie, you will either love or hate the lines of the Kawasaki Ninja Z800 — we happen to think it looks rather edgy and mean, which is how we like our street-nakeds to carry themselves.

For its added price and power, the 2013 Kawasaki Ninja Z800 comes 41mm KYB forks that feature preload and rebound damping only — the same goes for the Z800’s rear shock. The 2013 Kawasaki Ninja Z800e, however comes with forks and a rear shock that have only preload adjustment capability, and no damping controls. Both models come with an optional ABS package. We do not expect the Kawasaki Ninja Z800 to come to North America at this point in time. Waiting for you after the jump are 53 photos of the new Kawasaki Ninja Z800.

Keep Reading
By