Report: Honda RC213V-S Priced at ¥20 Million

According to a report made by The Asahi Shimbun, Japan’s second largest daily newspaper, Honda has green-lit the RC213V-S project, with a price tag of 20 million yen — roughly $170,000 USD. The Honda RC213V-S debuted at the 2014 EICMA show, and was as advertised: a MotoGP race bike with lights and mirrors added to it. Honda teased show-goers and the media by say that the RC213V-S model was only a prototype, adding more fuel to the speculation regarding whether the Japanese firm would actually produce the long-awaited model. Since its inception, price figures have been rumored and banded about, almost all of which were in the six-figure category.

Polaris Acquires Electric Motorcycle Business from Brammo

Polaris Industries has acquired the electric motorcycle business from Brammo, Inc. Polaris is also acting as a leading investor in the recapitalization of Brammo, which will enable Brammo to focus exclusively on the design, development, and integration of electric vehicle powertrains. This means that Polaris will takeover building electric motorcycles at its Spirit Lake, IA production facility, and that Brammo will continue developing EV powertrains for Polaris and other OEM partners. According to its press release, Polaris will start production of electric motorcycles in the second half of 2015.

Ducati Sets Sales Record for 2014 – 45,100 Bikes Sold

Ducati Motor Holding is reporting another record sales year, and that the Italian motorcycle manufacturer sold 45,100 bikes in 2014. This marks the fifth year in a row that Ducati has shown sales growth, and it’s the third year in a row that the sales figures have been an all-time record for the Italian brand. Sales for 2014 were up 2% over 2013, with the USA again leading as Ducati’s most important market (8,804 units sold in the USA). Unsurprisingly, the Asian market is growing quickly for Ducati as well, up 11% in 2014. Ducati attributes its sales growth in-part to its new water cooler Monster line, where the Ducati Monster 1200 and Ducati Monster 821 helped raise Monster sales by 31%, with 16,409 new bikes sold in 2014.

Newspeak: The Advent of the “Adventure-Sport”

In the past decade the ADV segment has been a confusing amalgamation of differing interests, and over that time-period, two distinct groups have boiled to the surface. First there are the “Long Way Round” hopefuls, who invariably own a BMW R1200GS/A, and seem to be on some sort of perpetual preparation for an African safari. More recently, a second group has appeared: those riders who look to these big ADV bikes as more versatile Sport-Touring machines. All these riders, and their bikes, have been wedged into a single “Adventure” category, and it has created a bit of confusion for the segment. So, I want to introduce the concept of the “Adventure-Sport” and how it differentiates from the previous “Adventure-Touring” category.

MotoGP: Ducati’s Desmosedici GP15 Officially Delayed

As had been widely expected, Ducati will not have the GP15 ready for the first test at Sepang, in early February. In an interview with the MotoGP.com website, due to be shown on 19th January, Ducati Corse boss confirmed that work was still underway on the all-new bike; and that instead, Ducati will be bringing an uprated version of last year’s bike, dubbed the GP14.3, to test aspects of the new design not requiring the new engine. The delays have been trailed by both Dall’Igna and Paolo Ciabatti, speaking to the media at the Valencia test and at the Superprestigio dirt track event in December. The GP15 is a completely new bike, designed from the ground up, with a completely redesigned engine.

1972 Honda CB500, 3D Printed to Life Size

We’ve talked a bit before about the virtues of 3D printing, and how this increasingly affordable technology could change the consumer landscape as far as how we buy basic parts in the motorcycle industry. For as practical as how 3D printing, or rapid prototyping, can be, it can also be beautiful and used for art. This story is sort of a merger of those two ideas. Jonathan Brand has hoped to buy a 1972 Honda CB500 motorcycle, but the birth of his son changed that plan. Where there is a will though, there is a way, and Brand came up with the next best thing — he built a life-size model of a CB500 with his 3D printer.

Mercedes CEO: No Further Acquisition of MV Agusta

Italians are rejoicing over the news that Mercedes-Benz CEO Dieter Zetsche has made it clear that the German car manufacturer is not interested in acquiring more of MV Agusta’s private stock. Loyal readers will remember that Mercedes-AMG purchased 25% of MV Agusta last October, for a rumored €30 million — echoing the move Audi made in Ducati. Talking at the North American International Auto Show in Detroit though, Zetsche said “however, to avoid what happened with Ducati we point out that we have no intention to take over the business or produce motorcycles. MV Agusta can do it better than us.”

Triumph Has Its Best Sales Year Since Its Rebirth

Good news for Triumph Motorcycles fans, as the British motorcycle marque is reporting a banner year for 2014 — with 54,432 units sold worldwide. That figure is up 4% over 2013’s sales figure of 52,089 units, which was the first time that Triumph broke the 50,000 unit mark since the company’s rebirth in 1984. Helping Triumph reach this new high-water mark was the company’s home market, where Triumph accounted for one-in-five motorcycles sold in the UK (over 500cc). Overall, Triumph saw 8% growth in the UK, as modest growth considering the British market was up roughly 10% last year. The news is not all good, however. Triumph previously reported that financial figures for the first-half of 2014 were down, with revenue down £364 million from £369 million, and net income at a loss of £8 million.

Husqvarna 401 Concepts Will Be 2017 Production Models

One of the more intriguing things to come out of the 2014 EICMA motorcycle show in Milan were Husqvarna’s two “401” concepts, the Vitpilen and Svartpilen. The café-styled bikes are based off the KTM 390 Duke platform, though you wouldn’t know it from looking at them. Husqvarna said at EICMA that if there was sufficient interest, the Vitpilen and Svartpilen could go into production. With an overwhelming critical response from the press and fans, it should come no surprise then that our friends at Bike.se are reporting that Husqvarna intends to make the small-displacement machines a part of its 2017 model lineup.

Ducati Desmosedici Cucciolo Concept by Alex Garoli

Imagine if you will that the first Ducati, the Ducati Cucciolo, and the most modern Ducati, the Ducati Desmosedici, had a child — what would it look like? That far-fetched question nagged Mexican designer Alex Garoli, so he decided to build a concept of the machine. At the core of the Ducati Desmosedici Cucciolo is the V4 powerplant of Italy’s MotoGP race bike, and around it Garoli has imagined a modern steel trellis frame that mimics the bicycle frame look of the post-WWII motorized bicycles that pulled Italy out of deep recession. Of course the most interesting thing about Garoli’s concept is the fact that it’s a ~12:1 scale model. The work is pretty exquisite, even if you don’t agree with the concept’s ethos.

2015 Suzuki GW250F — A Fully-Faired 250cc for the USA

10/02/2014 @ 12:33 pm, by Jensen Beeler18 COMMENTS

2015-Suzuki-GW250F-1

Suzuki has finally brought a full-faired small-displacement machine to the US market, announcing today the 2015 Suzuki GW250F. As the name implies, the Suzuki GW250F is really just the GW250, with full-fairing bodywork.

The move is perhaps the mother of necessity, as Suzuki doesn’t have a proper motorbike to go head-to-head with the Kawasaki Ninja 300, Honda CBR300R, or Yamaha YZF-R25.

With the small-displacement war well underway in the United States, Suzuki Motor America surely felt that something beyond just the Suzuki GW250 was needed, and hence the GW250F was born.

2015 Suzuki GSX-S750 — Budget Middleweight Streetfighter

10/02/2014 @ 11:54 am, by Jensen Beeler20 COMMENTS

2015-Suzuki-GSX-S750Z-USA-1

Suzuki Motor America has just wrapped up its dealer show, and the surprise announcement is the 2015 Suzuki GSX-S750. The 749cc cousin to the Suzuki GSX-S1000 that debuted at the INTERMOT show, the Suzuki GSX-S750 is exactly what you think it is.

Taking the GSX-R750’s engine, and tuning it for low-end torque and mid-range power, Suzuki says that the GSX-S750 is perfect for street riding. Europeans have been calling it the Suzuki GSR750, since 2011.

The real kicker for the American market though is the price, as the GSX-S750 (available only in matte black) comes in at a paltry $7,999. Meanwhile the “Metallic Triton Blue and Pearl Glacier White” painted Suzuki GSX-S750Z (shown above) will hit dealer floors at $8,149, MSRP.

We gave Suzuki a lot of grief over the GSX-S1000 this week, but it seems they heard our thoughts in advance regarding pricing on the GSX-S line. There appears to be tremendous bang for the buck with the Suzuki GSX-S750 — American street enthusiasts, your budget streetfighter is here. Photos and specs are after the jump.

Kawasaki Ninja H2R – Officially 300hp of Hyperbike

09/30/2014 @ 2:11 am, by Jensen Beeler55 COMMENTS

kawasaki-ninja-h2r-25

It is finally time for the Kawasaki Ninja H2R to become officially official. No more teaser videos with weird chirps, no more fake news stories for pageviews, no more leaked photos (x2)…now we finally get to see what all the hype is about with this hyperbike.

Though now that the time is here, it is hard to say something new about the 2015 Kawasaki Ninja H2R that hasn’t already been said. Rebirthing a name that is synonymous with the original superbike war between the Japanese manufactures, Kawasaki has reinstated an old game, and made a bold first move.

At the heart of the new Ninja H2R is a supercharged 998cc inline-four engine which produces 300hp horsepower. You did not read that figure incorrectly. Wrapped around it is a fetching steel-tube trellis frame.

Building a machine that conformed only to Kawasaki’s own desires to make the ultimate motorcycle, it is perhaps refreshing to see a sport bike that isn’t constrained by the rules of a racing series — though Kawasaki has some racing in mind with its carbon-fiber dripping Ninja H2R model.

Essentially a rolling showcase for Kawasaki Heavy Industries, the Japanese OEM hopes that the H2R will serve as a halo product for the rest of the company’s motorcycles, similar to what the Ducati 1199 Superleggera does for the Italian brand, as well as the Japanese firm’s work with its other subsidiaries.

2015 Kawasaki Ninja ZX-14R ABS 30th Anniversary Edition

07/11/2014 @ 6:17 pm, by Jensen Beeler10 COMMENTS

2015-Kawasaki-Ninja-ZX-14R-30th-Anniversary-01

In case you didn’t know, this is the 30th anniversary of the Ninja motorcycle line from Kawasaki. To commemorate the occasion, Big Green has already debuted the 2015 Kawasaki Ninja ZX-6R 30th Anniversary Edition and 2015 Kawasaki Ninja ZX-10R 30th Anniversary Edition motorcycles, and today the 2015 Kawasaki Ninja ZX-14R ABS 30th Anniversary Edition joins them.

Like its sport bike brethren, this special ZX-14R comes with a special livery, which will be available to only 300 lucky owners (each unit is specially numbered). Finished in a “Firecracker Red” with “Metallic Graystone” paint, along with gold pinstriping and gold brake calipers, you can be certain that the changes are purely skin deep for this special model.