Kawasaki Ninja H2 / H2R Pricing Revealed

Even though the Kawasaki Ninja H2R debuted in October at the INTERMOT show, and the Kawasaki Ninja H2 debuted a few weeks ago at the EICMA show, Kawasaki was a bit slow to release the pricing and availability details of its two supercharged machines. Releasing now details for the US market, we can quote pricing for the H2 and H2R throughout the world. In the United States, the Ninja H2 and Ninja H2R will cost $25,000 and $50,000 respectively. Interested parties will have to special order the bikes, before December 19th, from their local Kawasaki dealership, and buyers should note that the H2R comes with certain restrictions.

Up-Close with the Kawasaki Ninja H2

With the track-only Kawasaki Ninja H2R putting out 300hp from its supercharged 998cc displacement, the 200hp Kawasaki Nina H2 street bike seems positively demure, by comparison. Of course, any 200hp machine is more than a handful, and we doubt many H2 owners will keep their machines street legal for very long — it’s been explained to A&R that it doesn’t take much work to uncork the H2…we’re just not sure if that’s a good or bad thing though. Ostentatious might be the best way to describe the new H2. Bringing back forced induction to the sport bike scene is a pretty bold move from Kawasaki, and something we will likely see more of from the Japanese manufacturers.

Indianapolis GP Named Best Grand Prix by MotoGP

At the conclusion of each GP season, an awards ceremony is held to celebrate the year’s champions, crowning the top riders in each category, the top manufacturers, and even the top venue for the season. This year, the honors of the latter went to familiar locale, as the Red Bull Indianapolis GP round was named the “Best Grand Prix” of the 2014 season, making it the first North American round to receive such an honor. Selection criteria for the award included consideration of the venue, promotion, and overall facility operations. For the 2014 race, Indianapolis Motor Speedway once again repaved its infield section, making alterations to several turns in order to facilitate passing and adding to the track’s overall consistency.

Up-Close with the 2015 Ducati Multistrada 1200

If there’s a motorcycle that launched at EICMA that I wish we had given more coverage to, it would be the 2015 Ducati Multistrada 1200. The new adventure-sport machine from Ducati is all-new for the next model year, though it would be hard to tell it from the photos. Even our modest collection of “up-close” photos here don’t do justice to the venerable Multistrada. The face of the Multistrada 1200 has been reworked, with the “beak” softened a bit from its falcon-like profile. The intake inlets are larger in appearance, and the headlight housing is noticeably different with its six LED projectors for the Ducati Corner Lights system (on the “S” model). This perhaps makes for an interesting “face” on the motorcycle, and like its predecessor, you will either love it or hate it.

Marco Melandri Returns to MotoGP, with Aprilia

After finishing fifth in the 2014 World Superbike Championship with Aprilia, Marco Melandri will continue with the Italian manufacturer, but switch to the MotoGP paddock for next season. Melandri will join Alvaro Bautista in the Aprilia Racing garage, where they will compete on an updated version of the ART machine, which was originally built to compete under the CRT bike rules. The team, now operated by Gresini Racing, will come up to speed during the 2015 season, and in 2016 they will race with a brand new race bike, which will use the compulsory “open” spec-electronics from Magneti Marelli. For Melandri, the move to MotoGP is a bit of gamble, with Aprilia’s program uncertain.

Up-Close with the Honda RC213V-S Prototype

I can’t decide whether to be elated or disappointed over the Honda RC213V-S prototype, which was debuted this week at the EICMA show in Milan, Italy. On the one hand, the RC213V-S lived up to the hype…literally a MotoGP race bike with lights, mirrors, turn signals, and a license plate. On the other hand, for all the waiting and consternation from Honda, what they brought to Milan was a fairly derivative and obvious design. Rumors of a true MotoGP-derived sport bike from Honda have been circling for several years now (closer to a decade, if you’re a reader of MCN), and the project borrows the ethos found in the Ducati Desmosedici RR project, another exclusive GP-bike-for-the-street motorcycle.

The Ducati Streetfighter 848 Is Spared the Axe for 2015

The Ducati Streetfighter lives for another year, as Ducat is showing off the Ducati Streetfighter 848 as a 2015 model year machine at the EICMA show in Milan. There had been doubts about the Streetfighter 848 continuing to be a part of the Ducati lineup going forth, especially as the Italian company has moved away from the 849cc v-twin platform, favoring the 821cc engine variations for the Hypermotard the Monster lines, and the 899cc Superquadro for the Panigale. The Streetfighter was never a big hit in the world market, becoming more of a cult classic machine amongst riders. Combined sales with the Hypermotard account for roughly 20% of Ducati’s annual sales, with the Hypermotard doing the majority of the heavy-lifting in that regard.

Moto Guzzi MGX-21 Prototype

Cruisers really aren’t our cup of tea here at Asphalt & Rubber, which might explain the lack of coverage for America’s gift to the two-wheeled world on our website. That being said, it’s hard to pass on the lurid Moto Guzzi MGX-21 prototype that is on display at this year’s EICMA show. A reworked Moto Guzzi California 1400, the MGX-21 is clad in carbon fiber, matte black paint, and red highlights. The carbon fiber disc wheels are a nice touch too (that’s a 21″ wheel up front, by the way), as are the sweeping lines from the front cowl and fenders. We’re finding ourselves a bit smitten with this Moto Guzzi, as true to the brand, it strays from the cruiser norm. We think you’ll like it too, check out the photos after the jump.

Up-Close with the Honda “True Adventure” Prototype

One of the more anticipated motorcycles at the 2014 EICMA show, off-roaders were expecting to see the new Honda Africa Twin in Milan this week. Instead, Honda trotted out what they’re calling the “True Adventure” prototype. Despite not being a production model, the True Adventure prototype looks ready for prime time, and we got a series of “up-close” photos of the machine. Most obvious is the bike’s parallel twin engine, which is rumored to be 1,000cc in displacement. That sizing/weight class seems to jive with the dual front brake discs, which also sports an ABS tone ring. We can expect Honda to have traction control operating off the front and rear wheel speeds as well, and other electronic packages as well.

Money: Motorcycle Racing’s Biggest Problem

What is the biggest problem in motorcycle racing today? Is it the predominant role electronics are playing, ruining the racing? Is it the ever more restrictive rules imposed, killing bike development and the spirit of Grand Prix racing? Is it the lack of competitive machinery, making it impossible for anyone but a factory rider to win a race? Or is it the dominance of the two top manufacturers, driving costs up and discouraging wider manufacturer participation? You can point to all of those and more as being an issue, but they pale in comparison to the real problem the sport of motorcycle racing faces at the moment: Money. Specifically, the lack of it, and the inability of almost everyone involved in the sport to find ways of raising any. All of the ills of both MotoGP and World Superbikes can be traced back to this single failure.

Pierobon’s Take on the Ducati 899 Panigale

11/05/2014 @ 5:59 am, by Jensen Beeler4 COMMENTS

Pierobons Take on the Ducati 899 Panigale Pierobon Ducati 899 Panigale swingarm 05 635x422

When the Ducati 899 Panigale came out, there was some pushback from Ducatisti over the middleweight superbike’s double-sided swingarm. Ducati clearly had to water-down distinguish the 899 from the 1199 for would-be owners, especially after giving the Ducati 899 Panigale a near-literbike engine displacement.

We think if Ducati had fashioned the 899’s swingarm after the piece built by Pierobon, then perhaps the Italian manufacturer’s fans would have been less upset. Throw in an aluminum fuel tank, racing fairing stay, and trellis rear subframe, and you have one sharp looking 899 Panigale…and it doesn’t even have all its clothes on yet.

Pierobon Trellis Frame Kit for the Ducati 1199 Panigale

11/04/2013 @ 1:08 am, by Jensen Beeler19 COMMENTS

Pierobon Trellis Frame Kit for the Ducati 1199 Panigale Pierobon trellis frame Ducati 1199 Panigale 11 635x422

We already teased you with Pierobon’s newest creation, a trellis frame kit for the Ducati 1199 Panigale, and now we have the full details of this Italian firm’s work…along with some tasty photos.

Pierobon says it wanted to build a chassis kit was to build a bolt-on frame that would replace Ducati’s “frameless” design, with a steel trellis creation.

The project’s main goal was to add no further weight to the svelte Panigale, but also to bring the chassis stiffness into spec with the parameters Pierobon has shown on its previous machines (Pierobon X60R & Pierobon F042).

Using 28mm diameter steel tubing for the trellis work, Pierobon says it design meets the project’s weight criteria, and computer analysis suggests that torsional stiffness is right on point as well with the Bologna firm’s goals. Now Pieorbon just waits to go riding on the track.

Pierobon’s Trellis Frame for the Ducati 1199 Panigale – Ducatisti Purists, Your Prayers Have Been Answered

10/17/2013 @ 2:09 pm, by Jensen Beeler27 COMMENTS

Pierobons Trellis Frame for the Ducati 1199 Panigale   Ducatisti Purists, Your Prayers Have Been Answered pierobon trellis frame ducati 1199 panigale

We have featured the work of Peirobon on Asphalt & Rubber before, as the boutique firm from Bologna makes some intriguing air-cooled Ducati-powered sport bikes for discerning buyers, among other things.

Pierobon is also one of the companies we are looking forward to seeing at this year’s EICMA show, as the firm has something special this year for its booth display: a trellis frame kit for the Ducati 1199 Panigale.

Listen to the Pierobon X60R

03/08/2013 @ 3:17 pm, by Jensen Beeler10 COMMENTS

Listen to the Pierobon X60R pierobon x60r 02

Ok, so we here at Asphalt & Rubber may sort of have a growing crush on the Pierobon X60R, an Italian-made sport bike that features an 1,078cc air-cooled Ducati v-twin motor that is wrapped around the company’s custom aluminum tube frame.

Your answer to a light air-cooled track weapon, the Pierobon X60R is quite the looker too, and given its power plant pedigree, sight and touch aren’t the only senses it pleases. Check the exhaust note (powered by Termignoni) after the jump.

Moar Photos of the Pierobon X60R

12/17/2012 @ 1:49 pm, by Jensen Beeler8 COMMENTS

Moar Photos of the Pierobon X60R Pierobon X60R 04

Last year, our Christmas was ruined with the sighting of the Pierobon X60R sport bike. A small Italian company based in Bologna, for those who aren’t in the know, Pierobon has ties to some big projects in MotoGP & WSBK.

Known for their trellis chassis designs, the Pierobon X60R is the company’s two-wheeled flagship (be sure to checkout the Pierobon F042 street bike). We lusted after the X60R last year, you wanted one under your Christmas tree, and we all had to learn how to live our lives with disappointment afterwards.

Discontent to call things done, Pierobon has revised the X60R over the past year, with the most noticeable change being the Ducati Monster 1100 EVO air-cooled v-twin lump. Putting a little bit more pep in the bike’s step, Pierobon has also revised the chassis, namely the X60R’s swingarm.

Derived from the company’s GP designs, the chain-side of the swingarm has been fully enclosed, presumably for increased rigidity. Pierobon has also increased the size of the oil-cooler radiator to help with heat transfer on the more powerful motor.

Pierobon X60R – Your Xmas Wish List Just Got Longer

11/30/2011 @ 4:19 pm, by Jensen Beeler9 COMMENTS

Pierobon X60R   Your Xmas Wish List Just Got Longer Pierobon X60R 1

One of the nice things about actually going to motorcycle events, instead of phoning it in like many publications seem to do these days, is that you get to see all the treasure trove items that didn’t find their way onto some press release mill for mass consumption.

Such is the case of the Pierobon X60R, a custom sportbike that will surely cause some revisions to your Christmas wish list to Santa. We’ve featured Pierobon’s work before, with the Bologna company’s Pierobon F042 causing quite a stir earlier this year.

Like the F042, the Pierobon X60R features an air-cooled Ducati v-twin power plant, and the tuning firm’s own proprietary chassis design. There are plenty of performance parts and carbon fiber to drool over, and the design strikes as one that would have occurred had Ducati made a true air-cooled sportbike.

With Pierbon’s extensive experience in the racing scene, we can imagine how much fun an X60R would be on the track, we’ll just have to wait and see if a street model also makes a debut. If you’re a Ducatista and want to stand out from the cappuccino crowd, there are some photos after the jump that might interest you.

Pierobon F042 hstreet

04/04/2011 @ 7:32 am, by Jensen BeelerComments Off

Pierobon F042 hstreet Pierobon F042 hstreet

It seems only fitting that a company that takes a Ducati Monster motor, and puts it in its own proprietary frame should also hail from the Italian city of Bologna, as is the case here with Pierobon. Making a bevy of parts to add to your Ducati of choice, Pierobon also makes complete bikes, and has recently done up its F042 hstreet for your motorcycling consumption.

Showing off Pierobon’s aluminum trellis frame, the Pierobon F042 hstreet also features the ability to mount any of the current two-valve v-twins from Ducati (we’d suggest the peppier 1,100cc version, but wouldn’t judge anyone for going after a 796cc or 696cc motor).

While each bike is made to order, you can expect to drop at least €19,980 on a Pierobon F042 hstreet if you want one in your garage. For the more adventurous and mechanically inclined, the frame can be bought as a stand-alone part for the tidy sum of €3,680. Not exactly ridiculous prices for something that looks this good. Photos after the jump.