Some Thoughts on MV Agusta & A Story About Two Letters

MV Agusta USA recently invited a slew of journalists down to Fontana, California in order to talk about the company’s new business plan, and to ride its current lineup of motorcycles on the infield course. This article is “Part 1″ of that experience, as I wanted to separate my thoughts on MV Agusta, MV Agusta USA, and the general motorcycling climate into one story, and then have my “not-a-review” of the machines for another article. Got it? Ok, let’s go. It is probably easiest to start with where MV Agusta is as a company. MV Agusta has a started a new three-year business plan, which sees the company pushing into a full-range of motorcycles, pushing outside of its Italian boundaries, and pushing out of the “luxury” brand segment.

Photos: Ducati Desmosedici GP15

The Ducati Desmosedici GP15 is a machine that has been long in the making. It represents Gigi Dall’Igna’s next step forward for the wayward Ducati Corse MotoGP team, and it is the dubious honor of holding the hopes of Ducati fans around the world, who see the machine as the silver bullet that will return Ducati to the forefront of racing prowess — no pressure. The most obvious change that can be seen on the GP15 is the re-routing of the exhaust, with the undertail pipes collecting on the right-hand side of the machine, rather than coming in from both sides and meeting in the middle. Can you spot any other changes in the high-resolution photos after the jump? Let us know in the comments.

Politics & Corruption: Why There Isn’t a Race in Indonesia

If anyone needed any further proof that Indonesia is important to the Japanese motorcycle manufacturers, the fact the Repsol Honda team chose Bali as the location to launch their 2015 MotoGP project should remove any doubt. But if Indonesia is so important to the manufacturers, and to MotoGP, why is there not a race there? Over the course of the MotoGP test at Sepang, I had a few conversations with people on the subject. On the record, the story was always the same: we need a suitable track, and as soon as one exists we will be happy to go there. Off the record, however, they were much less optimistic.

A Requiem for Kenji Ekuan & The Kando of GK Design

Industrial design is not a commonly known, much less well understood, profession. To some it suggests arranging equipment inside factories, to others it means some kind of product engineering. In reality it is the search for, and expression of, human satisfaction in inanimate objects that are mass produced. That’s quite a mouthful, and to the average person it may sound like jiberish written for some pretentious coffee table book, but it is the truth. At least, it is one version of the truth as seen by the GK Design Group of Tokyo, Japan. If you ride motorcycles, then you are intimately familiar with the work of this large and internationally respected studio. Since only its second production bike, the indigenously designed YA-1, every Yamaha motorcycle since 1958 has been crafted by GK.

Are You The MV Agusta F4 RC?

What look to be official photos of the MV Agusta F4 RC have leaked out onto the internet, along with a slide from MV Agusta’s media presentation on the machine. The photos give us our first glimpse into Varese’s homologation special, complete with a special two-can exhaust by Termignoni. The leaked slide confirms some of the numbers being thrown around about the F4 RC, namely that it will have 212hp, 81.86 lbs•ft of torque, weigh 175kg dry, and cost €36,900 (we already know that the MV Agusta F4 RC will cost $46,000 in the USA). Information from a leaked slide last year has already told us that MV Agusta has radically overhauled the F4 RC’s engine, designing a new cylinder heard, new crankshaft, new camshaft, as well as adding bigger fuel injectors, lighter pistons, and titanium connecting rods.

Kenji Ekuan, Designer of the Yamaha VMAX Has Died

Mainstream news is mourning the death of Kenji Ekuan today, as the 85-year-old Japanese industrial designer is one of the most influential artists in Japan’s modern era, and is most well-known for his designing of the iconic Kikkoman soy sauce bottle. Ekuan’s lesser-known works though include a number of motorcycle designs for Yamaha, including the now 30-year-old Yamaha VMAX motorcycle, which makes his passing even more meaningful to motorcyclists around the world. Kenji Ekuan founded GK Industrial Design after WWII, and his company helped shape the way Japan rebuilt itself after the world war.

Ride Review: KTM 1290 Super Adventure

Despite its huge dimensions, not to mention a 30 liter fuel tank, the 2015 KTM 1290 Super Adventure never looks big or bulky. In fact, it is only when you mount the hard luggage that you can tell this bike can really cover long distances. Apart from a dorky little exposed wire from the heated grips near the throttle, the fit and finish is very high-end, especially the integrated curved lighting in the tank — it is quite a sight. At first glance the Super Adventure doesn’t have the massive personality and stance of its German rival, the BMW R1200GS Adventure, but that is in part due to the white color scheme and the absence of the typical beak as a front mudguard. KTM is going about things differently, and that is something that appeals to many riders…including us.

Yamaha VMAX Carbon – Celebrating 30 Years of VMAX

It is hard to believe that the venerable Yamaha VMAX has been around for 30 years (it is even harder to believe that the VMAX has only seen one design revision in that timeframe as well), and so Yamaha is bringing out a special edition model to celebrate this special motorcycle. The 2015 Yamaha VMAX Carbon is exactly as the name implies: a VMAX drag bike laden with lightweight carbon fiber. In total, the VMAX Carbon’s tank cover, front and rear fenders, and side covers are all made from carbon fiber. Yamaha has teamed up with Akrapovic as well, and as such the Slovenian company’s slip-on mufflers complete the exhaust system and the changes to this beastly drag bike.

LEAKED: Here is the 2016 Indian Chief Dark Horse

Cruisers aren’t really our forté, here at Asphalt & Rubber, but breaking stories is…so, without all the typical fanfare, we bring you the first full photos of the upcoming 2016 Indian Chief Dark Horse. The Stead is murdered out and visually appealing, with black engine covers, black fenders, black forks…hell, even the tires are black. Under the hood is Indian’s Thunder Stroke 111 engine, which is an air-cooled 1,811cc v-twin good for 73hp and 100 lbs•ft.More technical features include ABS as standard, a keyless ignition system, cast wheels, and a solo seat. Our Bothan Spies suggest an MSRP of $17,000, and more accessories (all black, natch) than you can fit into the belly of a Tauntaun. Expect to see the Indian Chief Dark Horse launch officially on February 13th elsewhere.

Washington State Weighs Pro Lane-Splitting Law

The Washington State Legislature has a pro lane-splitting bill on its 2015-2016 docket, HB 1515. The law is moderately written, adopting a 10 mph speed differential between the motorcycle and traffic, with a 35 mph speed cap, as acceptable during lane-splitting activities. Loyal Asphalt & Rubber readers will recognize these provisions as being more restrictive than the California Highway Patrol’s now defunct guidelines. Lane-splitting is a near-and-dear topic to us here at A&R, as we believe a national effort to legalize the practice should be mission #1 for the American Motorcyclist Association.

Listen to the Pierobon X60R

03/08/2013 @ 3:17 pm, by Jensen Beeler10 COMMENTS

pierobon-x60r-02

Ok, so we here at Asphalt & Rubber may sort of have a growing crush on the Pierobon X60R, an Italian-made sport bike that features an 1,078cc air-cooled Ducati v-twin motor that is wrapped around the company’s custom aluminum tube frame.

Your answer to a light air-cooled track weapon, the Pierobon X60R is quite the looker too, and given its power plant pedigree, sight and touch aren’t the only senses it pleases. Check the exhaust note (powered by Termignoni) after the jump.

Moar Photos of the Pierobon X60R

12/17/2012 @ 1:49 pm, by Jensen Beeler8 COMMENTS

Last year, our Christmas was ruined with the sighting of the Pierobon X60R sport bike. A small Italian company based in Bologna, for those who aren’t in the know, Pierobon has ties to some big projects in MotoGP & WSBK.

Known for their trellis chassis designs, the Pierobon X60R is the company’s two-wheeled flagship (be sure to checkout the Pierobon F042 street bike). We lusted after the X60R last year, you wanted one under your Christmas tree, and we all had to learn how to live our lives with disappointment afterwards.

Discontent to call things done, Pierobon has revised the X60R over the past year, with the most noticeable change being the Ducati Monster 1100 EVO air-cooled v-twin lump. Putting a little bit more pep in the bike’s step, Pierobon has also revised the chassis, namely the X60R’s swingarm.

Derived from the company’s GP designs, the chain-side of the swingarm has been fully enclosed, presumably for increased rigidity. Pierobon has also increased the size of the oil-cooler radiator to help with heat transfer on the more powerful motor.

Pierobon X60R – Your Xmas Wish List Just Got Longer

11/30/2011 @ 4:19 pm, by Jensen Beeler9 COMMENTS

One of the nice things about actually going to motorcycle events, instead of phoning it in like many publications seem to do these days, is that you get to see all the treasure trove items that didn’t find their way onto some press release mill for mass consumption.

Such is the case of the Pierobon X60R, a custom sportbike that will surely cause some revisions to your Christmas wish list to Santa. We’ve featured Pierobon’s work before, with the Bologna company’s Pierobon F042 causing quite a stir earlier this year.

Like the F042, the Pierobon X60R features an air-cooled Ducati v-twin power plant, and the tuning firm’s own proprietary chassis design. There are plenty of performance parts and carbon fiber to drool over, and the design strikes as one that would have occurred had Ducati made a true air-cooled sportbike.

With Pierbon’s extensive experience in the racing scene, we can imagine how much fun an X60R would be on the track, we’ll just have to wait and see if a street model also makes a debut. If you’re a Ducatista and want to stand out from the cappuccino crowd, there are some photos after the jump that might interest you.