Officially Official: MV Agusta Brutale Dragster 800 RR

We already brought you the first high-resolution photos of the MV Agusta Brutale Dragster 800 RR (say that three times fast!) yesterday, which were sent to us by our Bothan Spies. In response, MV Agusta has unveiled the Dragster RR and Brutale RR today, ahead of the EICMA show. Like the updated Brutale 800 RR, the Brutale Dragster 800 RR features a revised 798cc three-cylinder engine, which makes 140hp at the 13,100 rpm, and a very peaky 63 lbs•ft of torque at 10,100 rpm. Numerous visual cues have been changed, included red-anodized fork tubes, red-painted cylinder heads, and aluminum tubeless wire-spoked wheels. An eight-way adjustable steering damper continues the noticeable changes, to the 370 lbs machine (dry).

MV Agusta Brutale 800 RR — 140hp & MVICS 2.0

Along with the new Dragster RR, MV Agusta has debuted the Brutale RR, ahead of the EICMA show. Like its hot rod cousin, the MV Agusta Brutale 800 RR gets a 15hp increase, which makes for 140hp at the 13,100 rpm peak. A very peaky motor indeed, maximum torque arrives at 10,100 rpm at 63 lbs•ft. The Brutale RR also features the MVICS 2.0 electronics package, which first debuted on the still unreleased MV Agusta Turismo Veloce. An update to the already robust MVICS package, the key feature in the 2.0 revision is the quickshift operation, both for upshifts and downshifts. Equipped with EAS 2.0 and ABS as standard, we see the Brutale 800 RR priced at a modest €13,980 for the European market, while the similarly equipped MV Agusta Brutale 800 EAS ABS has a €2,300 price advantage, at €11,680 MSRP.

Ducati Scrambler Will Be “Made in Thailand”

Almost four years ago, we reported on Ducati opening a new assembly plant in Thailand. The move, which peeved Ducati’s factory workers, would see bikes destined for the Southeast Asian market assembled in the Thai plant, thus side-stepping many of the region’s aggressive tariffs on motorcycles. Nearing the end of 2014 now, and our Bothan Spies report that the Ducati Scrambler models will be the first motorcycles assembled in Ducati’s Thai plant that will then be shipped to the world market — a move that comes right after Ducati reached a new contract with its workers and unions, which sees the factory employees working fewer hours at higher wages.

Up-Close with the Yamaha YZF-R3

This week we not only go a chance to see the 2015 Yamaha YZF-R3 unveiled at the AIMExpo, but also we had the chance to see the R3 up-close in the flesh. The budget-minded sport bike shows the obvious signs of more cost-effecient construction and fitted components, yet retains the fit-and-finish you would expect from a Yamaha motorcycle. This makes the R3 a prime candidate for aspirational riders, who want an affordable first motorcycle that looks the part of a proper sport bike. Track enthusiasts and veteran riders though will be disappointed with the Yamaha YZF-R3’s non-adjustable KYB suspension, box swingarm design, and bulky chassis — this is still a 368lbs (wet) motorcycle.

Even More Photos of the 2015 Yamaha FJ-09 Leak

Yesterday we brought you the first official photo of the Yamaha FJ-09 tourer, which had been accidentally added to the Yamaha FZ-09 gallery on the Yamaha NA press site. Today it seems that leaks in Yamaha continue for the FJ-09, as our Dutch friends at Nieuwsmotor have discovered a bevy of press images, ahead of the 2015 Yamaha FJ-09’s debut at EICMA next month. Based around the FZ-09/MT-09 platform, the FJ-09 uses a similar three-cylinder engine as the sport nakeds, though looks to have more suspension travel and other touring elements. Picking up where the Yamaha TDM left off as a middleweight sport/adventure-tourer, the Yamaha FJ-09 could be a very interesting addition to Yamaha’s lineup.

Up-Close with the Kawasaki Ninja H2R

Asphalt & Rubber was on-hand for the AIMExpo in Orlando, covering the new bikes that are debuting on North American soil. We’ve already seen the new Yamaha YZF-R3 released here, as well as the Alta RedShift electric motorcycles (formerly BRD Motorcycles). While both bikes are impressive, and are massively important to the American motorcycle scene, the buzz remains about the Kawasaki Ninja H2R. The AIMExpo is the first venue for Americans to get a glimpse of Kawasaki’s hyperbike, and the H2R sits like a praying mantis, waiting to strike you with its supercharged charms. Naturally, we had to get a closer look…and bring you a bevy of high-resolution detail shots from the trades how floor. Enjoy!

2015 Yamaha FJ-09 Leaked ahead of EICMA

Someone at Yamaha is going to get a stern talking to today, as it seems a photo of the still unreleased Yamaha FJ-09 made its way to Yamaha’s press site accidentally, and didn’t yank it down before our friends at Common Tread caught a glimpse of it. Mixed in with photos of the Yamaha FZ-09, the photo of the 2015 Yamaha FJ-09 doesn’t really give too much away from the machine, as we’ve seen the same shot in black & white already. However, since it’s the new bike season, and Yamaha has already shown the YZF-R3 and teased the all-new YZF-R1, we thought it would be appropriate to show you this new model in all its glory. Based off the FZ-09 platform, the FJ-09 will be Yamaha’s budget-minded sport/ADV-touring machine, picking up were the old Yamaha TDM left off.

Ducati 1299 Will Have “Tiptronic-Like” Shifting

If there is a common thread for Ducati’s upcoming EICMA reveal, it is the influence and benefits of owner Audi AG. We have already seen the German car manufacturer’s variable valve timing technology find its way into the Testastretta engine, in the form of Desmodromic Variable Timing (DVT). Our sources say that the all-new Ducati Multistrada, which will debut in just a few weeks’ time, will be the first model equipped with DVT. While Ducati ups its ante in the ADV market, our Bothan spies have tipped us off to another piece of Audi tech that will find its way onto a Ducati motorcycle, as the 1299 will received a “Tiptronic-like” gearbox that allows for touch-button upshifts and downshifts.

Yamaha YZF-R3 Revealed – 321cc Twin Coming to the USA

The rumors were true, Yamaha is bringing a special small-displacement model to market, the Yamaha YZF-R3. As the name indicates, the new R3 gets a fuel-injected displacement bump over the R25, to the tune of 321cc. Debuted at the AIMExpo today, the Yamaha YZF-R3 is coming to the USA, with a price tag of $4,990. Said by Yamaha to have “class-leading power”, the new R3 finally adds a small-displacement sport bike to Yamaha’s North American lineup, and makes an attractive offering when compared to the other 250cc/300cc machines from the other Japanese manufacturers. Expect to see it in Yamaha dealers, starting January 2014. Yamaha North America expects the YZF-R3 to be the volume leader for the company in the USA and Canada, and rightfully so.

Ducati Announces DVT — Desmodromic Variable Timing

As was teased, Ducati is unveiling its “DVT” technology today, which stands for Desmodromic Variable Timing, and to showcase that technology (borrowed from Volkswagen), Ducati has produced the first motorcycle engine with variable valve timing on both the intake and exhaust camshafts. Adapted to the now-called Ducati Testastretta DVT engine, which we reported will debut first on the new Ducati Multistrada for 2015, Ducati’s new v-twin powerplant can change the intake and exhaust timing independently, and throughout the rev range. This means that the Ducati Testastretta DVT engine can be optimized for peak power at high rpms, while maintaing rideability and smoothness at lower rpms — not to mention keeping with emission and noise regulations throughout the rev range.

Espargaro’s €600,000 Decision, Hayden Closing on Aspar

09/14/2013 @ 5:06 pm, by David Emmett12 COMMENTS

Espargaros €600,000 Decision, Hayden Closing on Aspar aleix espargaro motogp aspar jensen beeler 635x423

Though the factory seats in MotoGP are all filled, the prime seats on the non-factory entries are still open. Top favorites among the riders are the NGM Forward team, with the leased and FTR-kitted Yamaha M1s, and the Aspar team, which will be running factory-backed Aprilias, though not as an official factory team.

These four are the most competitive of the non-factory bikes, and any rider dreaming at a shot of a return to a factory ride, with Suzuki in 2015 perhaps, will want to be on board one of these bikes. At the moment, there are two lynchpins around which all of the rest of the choices revolve.

Monday Summary at Silverstone: Rossi in the Second Group, An Improving Bautista, & Aprilia’s CRT

09/02/2013 @ 10:09 pm, by David Emmett13 COMMENTS

Monday Summary at Silverstone: Rossi in the Second Group, An Improving Bautista, & Aprilias CRT Sunday Silverstone British GP MotoGP Scott Jones 07 635x423

With so much happening at the front of all three races at Silverstone last Sunday, it is easy to overlook the battles behind. Especially when those battles seem to be falling into a fixed pattern, repeating the results of previous races.

A glance at the results of the MotoGP race Silverstone gives you a sense of déjà vu. While the top three swapped places, positions four to six were identical to their finishes at Brno, places seven to nine differed only in the riders who crashed out, and Aleix Espargaro took tenth spot, as he did in the Czech Republic. A pattern is definitely starting to form here.

MotoGP: Yamaha Up’s the Ante with Non-MSMA Race Bike

07/19/2013 @ 8:17 pm, by David Emmett9 COMMENTS

MotoGP: Yamaha Ups the Ante with Non MSMA Race Bike jorge lorenzo motogp laguna seca jensen beeler 635x421

When Yamaha announced they would be leasing their M1 engines to ex-CRT teams for 2014, the first wave of reaction was overwhelmingly positive. With 24 liters of fuel allowed, and 12 engines instead of 5, the Yamaha engine package looked like being the best thing on offer to the so-called non-MSMA teams, as CRT is to be called from next year.

Then doubt set in. Looking at the Yamaha M1 package, what you’d want from Yamaha was the chassis rather than the motor. The engine is the least powerful of the MotoGP prototypes, but its chassis was by far the best of the bunch. Both the Honda and the Yamaha non-MSMA packages appeared to be offering the worst part of each bike: Honda offering their chassis (good, but not great) and a dumbed-down version of their superlative engine.

Yamaha offering a full-fat engine (the weakest of the bunch), for teams to have someone build a chassis around without Yamaha’s 20+ years of experience building Deltabox frames. Perhaps the Yamaha M1 lease package – a lot of money, just for some engines – was not the bargain it at first appeared.

MotoGP Silly Season Update: Scott Redding’s Prospects, Yamaha’s Leased Engines, & Who Will Buy A Honda?

06/25/2013 @ 12:55 pm, by David Emmett12 COMMENTS

MotoGP Silly Season Update: Scott Reddings Prospects, Yamahas Leased Engines, & Who Will Buy A Honda? FTR CRT MotoGP Scott Jones 635x422

The Dutch TT at Assen looks like being a very busy few days for everyone looking for a ride next year. The end of June has been earmarked as a deadline for all sorts of negotiations, from rider contracts to bike projects. Decisions will be made and contracts – or at least letters of intent – will be signed. A lot of paperwork should get done by the time the trucks roll out of the paddock on Sunday, heading for Germany and the Sachsenring.

Though most of the prototype rides are already wrapped up, there are still a few seats open, and some interesting and major changes could be on the way. The focal point for the future, and the key to all of the moves for next year is Scott Redding. The young Briton has raised his game in 2013, elevating himself to both the favorite for the 2013 Moto2 title, and hot property for MotoGP next season.

NGM Forward Talking with Kawasaki for a MotoGP Return?

03/06/2013 @ 1:31 pm, by David Emmett6 COMMENTS

NGM Forward Talking with Kawasaki for a MotoGP Return? Marco Melandri Hayate Kawasaki MotoGP Qatar Scott Jones 635x422

The NGM Forward racing team was a pioneer of the CRT concept. It was the NGM Forward team who was the first to present its plans to race the bikes presented as an alternative to the cripplingly expensive factory prototypes, launching their 2012 campaign with Colin Edwards at Misano in 2011 — though Edwards had an excruciating year aboard the Suter BMW, jumping ship to the Kawasaki-powered FTR for the 2013 season.

Now, Forward is preparing the ground for its 2014 campaign even earlier. In an interview with GPOne, NGM Forward boss Giovanni Cuzari revealed that the team is already in talks with several manufacturers for the season after this one.

Cuzari said he had had a recent meeting with Dorna CEO Carmelo Ezpeleta to discuss 2014, when major changes will take place in MotoGP, with the dropping of the CRT category and the introduction of a new division, between the MSMA entries and the non-MSMA entries. Cuzari told GPOne that he had discussed the projects proposed by Honda (the production version of the RC213V) and Yamaha (leasing M1 engines for use in custom-built chassis), but he also said he had had contacts with both Suzuki and Kawasaki.

Official: Colin Edwards to Forward Racing’s CRT Team – Hopes for an R1 Motor in a Tech3 Chassis

09/02/2011 @ 10:33 am, by Jensen Beeler7 COMMENTS

Official: Colin Edwards to Forward Racings CRT Team   Hopes for an R1 Motor in a Tech3 Chassis  Colin Edwards MotoGP Scott Jones

As we published at the Indianapolis GP this past weekend, Colin Edwards’ time in the Monster Yamaha Tech3 garage seemed to be coming to an end, as the veteran MotoGP racer and former-World Superbike Champion was linked to several other possibilities in WSBK and MotoGP for the 2012 season. Making his thoughts clear, Edwards believes there’s some value to the claiming rule team (CRT) formula, saying ”I think there’ll be tracks where it’s going to surprise some people.”

Finally releasing his plans for the 2012 season, Edwards announced today at the San Marino GP that he will race for the Italian NGM Forward Racing team, on a CRT bike, next season. While the team has been linked to a BMW/Suter motor and chassis, Edwards will use instead an R1 motor with a custom chassis. The preference right now is for Tech3’s Guy Coulon to make a chassis for the R1 motor, as the team did for its own Moto2 effort, but nothing has been finalized with the French MotoGP team.

«