MotoGP Closes Two Crucial Loopholes in Its Rulebook

Heads up GP fans, as the MotoGP Championship is set to close two crucial loopholes in its rulebook for the 2019 season, which the Grand Prix Commission says in its press release are needed in order to keep the sport within the spirit of the rules. The first loophole blandly affects the spec-ECU and its CAN protocol and connection, which is fairly innocuous until you read between the lines of it, while the second concerns the regulation of aerodynamic bodywork, which should be more obvious to regular MotoGP fans.If you will allow us to Tarantino these two rulebook changes, the MotoGP Championship will impose more regulation on aerodynamic bodywork, namely it will remove the loophole that allows manufacturers to change the internal structure of their don’t-call-them-winglets.

Rumors of a New Aprilia RSV4 Begin

This is the 10th year of the Aprilia RSV4 superbike, and despite that duration, the V4 superbike remains one of the top machines that you can stick in your garage. Part of this is due to the fact that the RSV4 is an incredibly well-engineered high-tech motorcycle. After all, it was the first superbike to use an inertial measurement unit (IMU) in conjunction with traction control, and one of the first superbikes to have a ride-by-wire throttle. The other part of Aprilia’s dominance comes down to the fact that the Italian brand has consistently updated the RSV4 every couple of years, helping keep it at the sharp end of the superbike stick. Now if you believe the rumors, the 2019 model year will be no different.

Cameron Beaubier Headed to WorldSBK for 2019?

When you talk to veterans of motorcycle racing about which American could be the next champion at the international level of the sport, one name is almost always included in that very short list: Cameron Beaubier. This is not only because of Beaubier’s status as a two-time MotoAmerica Superbike champion, but also his experience abroad. A promising young rider, Beaubier impressed during the 2007 Red Bull Rookies Cup season, which found him some riders on the international stage before returning to the USA. Now a proven talent on domestic soil, along with his experience abroad, Beaubier is an easy pick to make when looking for Americans to promote to a paddock like the WorldSBK Championship. And now that is exactly the case, with the Cameron Beaubier tipped for ride in World Superbike next season.

More Details on the KTM 790 Adventure R Emerge

The KTM 790 Duke hasn’t even made it to American soil yet — though, it strangely can race in the production middleweight class at Pikes Peak… — and we are already talking about its off-roading sibling, the KTM 790 Adventure R. Built around the same 799cc parallel-twin engine found in the Duke model, the Adventure variant takes things to a whole new level for ADV riders. Promising light weight, plenty of off-road power, and Dakar-inspired chassis components, this should be the adventure-tourer that dual-sport riders have been asking for. With the production version of the KTM 790 Adventure R set to debut later this year at the annual industry trade shows, most of our appetite has been sustained by the prototype bike, which has been making the marketing rounds.

Tom Sykes, Where Will You Be Racing Next Year?

With Jonathan Rea’s future firmly set at the Kawasaki Racing Team, the focus this past weekend at Laguna Seca was on the future of his teammate, Tom Sykes. The Yorkshire man had spared few words in the media for his team and teammate in the days ahead of the California round, and he certainly wasn’t holding too much back once he was at Laguna Seca. You could almost smell the smoke emanating from Sykes, a result of the bridge that was being burned behind him. Sykes is 99.9% not riding with Kawasaki for the 2019 World Superbike Championship season, and he finds himself as one of the top picks in the paddock in the rider market. Chaz Davies is another top rider who is highly sought after in the paddock, and he is likely to remain at Ducati.

Moto2 Builders Out Testing the Triumph Triple

The 2019 Moto2 Championship is rapidly approaching, and next year’s season sees the introduction of a new spec-engine platform. Using a 765cc three-cylinder engine from Triumph, Moto2 competitors have begun testing their new chassis designs for the British triple. Out in Aragon, we get our first glimpse of the front-running race bike providers: Kalex, KTM, and NTS, as well as Triumph’s own test mule, which uses a Daytona 675 chassis. Shaking down their machines ahead of the start of next season, bike manufacturers focused on learning the new race engine and its accompanying spec-ECU. The Kalex was ridden by Moto2 racer Alex Marquez and test rider Jesko Raffin; on the KTM was Julian Simon and test rider Ricky Cardús; and on the NTS was Moto2/MotoGP veteran Alex de Angelis.

Polaris Moving Production to Europe Because of Tariffs?

President Trump’s trade war is about to see another player in the motorcycle industry jump ship from American soil, and this time it is heavyweight Polaris Industries. According to a report by the Minneapolis/St. Paul Business Journal, Polaris is considering moving some of its production capacity to Europe, eyeing a production facility in Poland that would build units for the European market. The move is a direct response to the retaliatory tariffs imposed by the European Union on motorcycle imports, which itself was a response to the Trump Administration’s taxing of steel and aluminum imports.

Here’s Why Suzuki’s New Factory Is Such a Big Deal

One of the more overlooked announcements this week is perhaps one of the bigger ones we have seen in a while, as Suzuki Motor Corp has announced the creation of a new manufacturing plant in Hamamatsu, Japan. The new factory combines engineering, development, engine production, and vehicle assembly into one location, which will streamline operations, increase efficiency, and reduce production costs on Suzuki’s Japanese-made motorcycle models. Over 40 acres in size, the new factory is massive, and it sits in the Miyakoda district of Hamamatsu. Part of a five-year consolidation plan, the new factory replaces an engineering and development facility in Ryuyo; an engine production plant in Takatsuka; and a motorcycle assembly line in Toyokawa.

Take a Look at the Norton Atlas, Another British Scrambler

Today we get another look at Norton’s 650cc project, now named the Norton Atlas. We have already seen concept sketches for this British scrambler, and now Norton is showing us some engineering renders. This is because the physical machine should debut later this year, at the NEC bike show in November. Details are still vague and light, but we do know that the 650cc parallel-twin engine will piggyback off the work done for Norton’s V4 superbike. Essentially the using the V4 engine with its rear cylinders lopped off, the parallel-twin engine shares the same head, pistons, valves, etc as the V4 bike. Several flavors of the Atlas are expected to come to market, with 70hp and 100hp naturally aspirated versions already planned, as well as a supercharged version that is said to clear 175hp.

Limited Edition Celebrates 25 Years of the Ducati Monster

This year marks the 25th year of the Ducati Monster, one of the most iconic motorcycles ever to come out of the Borgo Panigale assembly line. To commemorate this 25-year mark, we have the aptly named Ducati Monster 1200 25° Anniversario. A special edition version of the Italian naked bike, only 500 Anniversario models will be produced for the world’s market, with the highlight being the machine’s tricolore livery and gold frame and wheels. Mostly an aesthetic exercise, the Ducati Monster 1200 25° Anniversario comes with some top-shelf parts, and a number of pieces to make this a unique member of any Ducatisti’s garage. Key features include Öhlins suspension, forged Marchesini wheels, and Ducati’s up/down quickshifter mechanism.

After the news that the Benelli Due 756 would finally be produced and released came out last week, the Italian brand has released a clarification in response to the news that hit the interwebs. Confirming that the Due would indeed become a production model (after making the rounds at motorcycle shows for the better part of the last five years), the Chinese owned Benelli Q.J. released a statement saying that the release date would not be the end of 2011 as some sites had reported, but instead at the end of 2012 (seemingly making this a 2013 model year motorcycle).

Benelli has not outright denied that the news that the Due will hit the Chinese market before it makes its way to Europe, though the Chinese company was quick to say in its statement that “the current version of the Due will be produced in Italy and exported to China and the emerging global markets (without neglecting the European market).” Cryptically we gather that means that the Due we’ve seen will be a world model, while an updated version is slated to hit the European market at some point in the future (2018 perhaps?).

Continue Reading

Benelli Due 756 Finally Goes Live…in China?

12/16/2011 @ 11:28 am, by Jensen Beeler13 COMMENTS

The Benelli Due concept has been in the works for so long, we’re officially giving it the Duke Nukem Forever status of the motorcycle industry. I first laid my eyes on the two-cylinder street-standard back in 2009, as the then called “2ue” was making its second EICMA appearance (the Due made its first appearance as early as the Cologne show in 2006).

Essentially a Benelli triple with a cylinder lopped off, the Benelli Due displaces 756cc with its inline cylinders, and is an otherwise attractive motorcycle. Given how much of a basketcase the “Tre” motor was, we can only imagine the “character” its two-cylinder counterpart brings to the table, though that is an entirely different issue.

Finally announcing that the Benelli Due will hit dealership floors in 2012, the Chinese-owned Italian company has an interesting twist with its news: the Benelli Due will be released in China first, then Europe and other markets.

At play surely is the idea and principle of pride that Chinese companies should release models in their home country first, before servicing other markets. This notion is surely understandable, but does strike us as interesting considering that Europe and North America are likely to be bigger volume markets for this big-displacement motorcycle.

Continue Reading

MV Agusta F3 ‘Serie Oro’ Unveiled

07/14/2011 @ 9:35 am, by Jensen Beeler11 COMMENTS

MV Agusta has officially taken the wraps off its collector’s edition MV Agusta F3 ‘Serie Oro’ motorcycle, showing the three-cylinder supersport machine in its final production trim. Producing only 200 units of the Gold Series, MV Agusta is building these bikes to each customer’s specifications, with a price tag upwards of €20,000 being the name of the game. Helping justify that high cost for the MV Agusta F3 Serie Oro, MV Agusta has made Brembo monobloc calipers, Öhlins forks, an Öhlins TTX rear shock, and forged aluminum wheels all stock on the 675cc supersport machine.

The premium F3 also boasts plenty of carbon fiber and a sophisticated electronics package, though some might find the price hard to swallow in the middleweight sport bike category (even if there are nice touches like painted mirrors and intake grills). Accordingly, MV Agusta has also announced the MSRP for the base model MV Agusta F3, with European pricing set at €11,990. Production for the MV Agusta F3 has also been moved up by four months, meaning bikes will be in the hands of dealers by the end of this year. Photos of the 2012 MV Agusta F3 ‘Serie Oro are after the jump.

Continue Reading

Bimota HB4 Moto2 Race Bike Officially Revealed

01/15/2010 @ 1:57 pm, by Jensen Beeler5 COMMENTS

Alongside the release of the Bimota DB8, the company from Rimini has also taken the wraps off its Bimota HB4 Moto2 race bike. We caught the HB4 out testing a couple weeks ago, and were under-impressed with the looks of the matte black bike (the name Bimota sets such a high standard after all).

Moto2 is supposed to be the perfect fit Bimota and its jaw-dropping chassis designs, where were the exercises of Italian sex appeal in the metal work? Now with some better lighting and some higher quality shots, we can see that the Bimota HB4 is a stunner after all. Photos and more after the jump.

Continue Reading

193hp BMW S1000RR Street Bike Unveiled at Monza

05/11/2009 @ 1:02 am, by Jensen Beeler1 COMMENT

bmw-s1000rr-street-bike-monza-green-1

Before the World Superbike race at Monza this weekend, BMW officially revealed the S1000RR street bike that they have been teasing us with over the past 6 months. The bike isn’t the prettiest, but it has it where it counts. Tipping the scales at 183kg dry (403lbs), and 204kg wet (449.7lbs), the S1000RR makes a claimed 193hp at 13,000 RPMs, and 82.5 lb•ft of torque at 9,750RPMs. The S1000RR will also feature a four-stage ABS and race-derived traction control system. All this, and a price tag that BMW promises will be competitive against the Japanese manufacturers.

The S1000RR’s other features include a slipper clutch, six-speed gearbox, fully adjustable 46mm USD forks, fully adjustable rear monoshock, ride height adjustment at the rear, Brembo brakes (with radial-mount callipers at the front), and an aluminium chassis that uses the engine as a load-bearing member. The swingarm features an eccentric pivot, enabling different adjustments to raise and lower the height of the S1000RR in order to change the bike’s steering geometry. What’s not to like?…Besides the headlight. Tons of photos and a video after the jump.

Continue Reading

Further Aprilia RSV4 Specifications Revealed

04/13/2009 @ 1:54 pm, by Jensen BeelerADD COMMENTS

aprilia-rsv4-biaggi-track-6

The Aprilia RSV4 is set to go on sale soon this summer in Europe, and later in the year here in the US. As such, details about the bike are starting to emerge, as well as a plethora of promotional materials. Continue reading for the official technical specifcations of the RSV4, and pictures from its press only track debut.

 

Continue Reading

Harley Davidson to Make XR1200

11/24/2008 @ 8:51 pm, by Jensen BeelerADD COMMENTS

According to a dealer announcement, the Harley Davidson XR1200 will be released in the U.S. at the IMS show in Long Beach, California this December 5th. If you’re not quite up to speed on Harley’s performance oriented bikes, the XR1200 is based off of the 1200cc air-cooled Sportster engine, and has styling and design that harken back to Harley-Davidson’s dirt-tracking days with the XR750. Read more after the jump.

 

Continue Reading

Ducati 1198 and 1198S Superbikes Released

11/03/2008 @ 1:03 pm, by Jensen BeelerADD COMMENTS

UPDATE: Info on the Troy Bayliss Limited Edition

But wait! There’s more! There’s a reason that the Streetfighter will get the Superbike’s 1098 mills…it is because the Superbike line no longer needs them! Ducati will be bumping the rest of the Superbike line (the 1098R has already made the engine displacement jump) to the newly decided upon 1198cc displacement for the World Superbike regulations. More after the jump.

 

Continue Reading

Ducati Streetfighter (1098?) Coming Monday

10/28/2008 @ 11:42 pm, by Jensen BeelerADD COMMENTS

Ducati has added a flash intro to their site telling of a “Streetfighter” to be released this Monday, November 3rd. We can only speculate on what this bike could be, considering the wraps on the new Monster 1100 is already out. Could this be the rumored 1098 streetfighter to help stave off the likes of the Aprilia Tuono, Benelli TnT, and other naked sportbikes?

UPDATED: Only time will tell what the real bike looks like, but read more to see some artistic “opinions” of what the naked livery could look like.

 

Continue Reading