Tag

Recall

Browsing

Ducati North America is recalling a number of its XDiavel power cruisers for final drive pulley that may not have been sufficiently tightened at the factory. The recall affects 1,433 units, bike manufactured between July 7th, 2015 to June 22nd, 2016.

With the pulley not properly tightened, there might be a loss of power to the rear wheel, which increases the risk of a crash. As such, Ducati dealerships will install a new washer under the final drive pulley, in order to increase the tightening torque. This will be done free of charge.

American Honda is recalling two machines for problems with their fuel pump internals, the Honda Grom (MXS125) pocket bike and the Honda Forza (NSS300) scooter.

The recall affects 2014-2015 model year machines, and centers around the resin bracket inside the fuel pump, which may swell and cause the pump impeller to seize.

As a consequence of the resin bracket swelling, the fuel pump may seize, which would stall either motorcycle. Because a stalled vehicle can increase the risk of a crash, a safety recall has been issued by the National Highway Traffic Safety Administration.

A recall has been issued for the BMW R nineT, affecting bikes from both the 2014 and 2015 model years. The recall is being issued because the design for the rear turn signals may be obscured, for drivers following behind the motorcycle.

Since the light assembly does not comply with the provisions of Federal Motor Vehicle Safety Standard number 108, “Lamps, Reflective Devices, and Associated Equipment,” this recall was issued through NHTSA.

All said, the recall affects 1,792 machines, those manufactured between November 27, 2013, through January 26, 2015.

Zero Motorcycles is recalling a number of models from its 2015 lineup, all for issues with DC-DC converter, which takes direct current electricity from one voltage and converts it to a different voltage.

According to the recall documents, when under high-power demands the DC-DC converter can suffer from insufficient output, which in-turn can cause the anti-lock brake system (ABS) not to function properly.

Since the failure of the ABS can lead to an increase in the risk of a crash, Zero Motorcycles has issued this recall, and while this recall affects the SR, S, DS, and FX motorcycle lines, only 96 motorcycles are actually being recalled under this notice.

Honda has issued a sizable recall for 11,424 motorcycles, which pertains to the Honda CBR300R and Honda CB300F motorcycles for the 2015 and 2016 model years. The recall stems from a the bikes’ crankshafts, which may have been machined improperly, and as a result could cause the rod bearing to fail.

Since a rod bearing failure could potentially stall the engine, a recall was filed with the National Highway Traffic Safety Administration (NHTSA).

So far, Honda has only found 41 affected motorcycles, with zero injuries reported. Honda dealers were notified in July to stop sales of the CBR300R & CB300F until recall work could be completed.

Kawasaki’s pocket-sized motorcycle, the Kawasaki Z125 Pro, is getting a recall for a faulty shock absorber, which according to documents filed with the National Highway Traffic Safety Administration (NHTSA), may leak oil and lose functionality.

Since the loss of oil from the shock absorber can change the handling characteristics of the motorcycle, which in turn could lead to a crash, Kawasaki is recalling 1,282 units of the Kawasaki Z125 Pro.

Yamaha YZF-R3 owners should take note, as not one, but two recalls have been issued on their motorcycles. Both recalls appear to affect the entire crop of Yamaha YZF-R3 motorcycles sold in the USA, totaling 11,280 machines.

The first recall affects the YZF-R3’s oil pump, which may not be regulating oil pressure correctly, and thus could potentially seize the motorcycle’s engine from lack of oil.

The second recall affects the YZF-R3’s clutch pressure plate bearing, which may break due to an insufficient load rating. This may cause the clutch not to disengage, and prevent the transmission from shifting properly.

The Indian Motorcycle Company is recalling 18,367 motorcycles today, for an ignition issue that may see unburnt fuel pass through the exhaust system during a misfire, which could result in the exhaust temperature increasing and potentially causing a fire.

The recall affects basically all of Indian’s motorcycles that use the Thunder Stroke 111 engine, built between 2014 and 2016.

Specifically, the recall affects the Indian Chief Classic, Dark Horse, Chieftain, Roadmaster, Vintage and Chieftain Dark Horse motorcycles that were manufactured between April 15, 2013 and June 16, 2015.

It should be noted that the Indian Springfield is not a part of this recall, being the newest bagger in Indian’s lineup.

Today, we bring you a strange recall from the NHTSA, as Kymco USA is recalling 476 units of its K-Pipe 125 motorcycle because their gear shift pattern is opposite of what is standard.

According to the recall filed with the NHTSA, the Kymco K-Pipe 125 bikes – manufactured from March 1st, 2016 to May 25th, 2016 – were assembled with the gear shift pattern in reverse.

As such, these motorcycles fail to comply with Federal Motor Vehicle Safety Standard (FMVSS) No. 123, “Motorcycle Controls and Displays,” which dictates that all motorcycles sold in the USA must have the same shift pattern.

It looks we’ll see two Ducati recalls this week. In addition to the Ducati 1199 Superleggera recall we saw on Monday, the 2016 Ducati XDiavel S is also getting a recall from Ducati North America.

This recall centers around the rear wheel on the Ducati XDiavel S, which may have been installed incorrectly onto the wheel hub. This recall affects only the XDiavel S model, and encompasses 925 motorcycles in all.

If the rear wheel was incorrectly installed on the hub, this may cause the drive pins to fail, which would result in a loss of brakes and power from the engine.

Since a failure of this type could lead to the motorcycle crashing, Ducati North America has issued a recall with the NHTSA.

The gearbox recall for the 2015 Yamaha YZF-R1 was a massive undertaking. In total, the recall affected 2,921 motorcycles, with Yamaha estimating almost 16 hours of labor per bike in order to change out the gearbox. That’s a lot of shop time for each individual motorcycle.

That time isn’t cheap either, and the cost of the labor alone was somewhere around the $5 million mark. By the time you threw in the cost of the parts, the R1 recall likely cost Yamaha somewhere north of $10 million.

To get a sense of how long that recall work took, checkout this time-lapse video that a mechanic made while working on one of the affected superbikes. Be sure to note that the video spans two days of shop time. It’s quite the process.