Officially Official: MV Agusta Brutale Dragster 800 RR

We already brought you the first high-resolution photos of the MV Agusta Brutale Dragster 800 RR (say that three times fast!) yesterday, which were sent to us by our Bothan Spies. In response, MV Agusta has unveiled the Dragster RR and Brutale RR today, ahead of the EICMA show. Like the updated Brutale 800 RR, the Brutale Dragster 800 RR features a revised 798cc three-cylinder engine, which makes 140hp at the 13,100 rpm, and a very peaky 63 lbs•ft of torque at 10,100 rpm. Numerous visual cues have been changed, included red-anodized fork tubes, red-painted cylinder heads, and aluminum tubeless wire-spoked wheels. An eight-way adjustable steering damper continues the noticeable changes, to the 370 lbs machine (dry).

MV Agusta Brutale 800 RR — 140hp & MVICS 2.0

Along with the new Dragster RR, MV Agusta has debuted the Brutale RR, ahead of the EICMA show. Like its hot rod cousin, the MV Agusta Brutale 800 RR gets a 15hp increase, which makes for 140hp at the 13,100 rpm peak. A very peaky motor indeed, maximum torque arrives at 10,100 rpm at 63 lbs•ft. The Brutale RR also features the MVICS 2.0 electronics package, which first debuted on the still unreleased MV Agusta Turismo Veloce. An update to the already robust MVICS package, the key feature in the 2.0 revision is the quickshift operation, both for upshifts and downshifts. Equipped with EAS 2.0 and ABS as standard, we see the Brutale 800 RR priced at a modest €13,980 for the European market, while the similarly equipped MV Agusta Brutale 800 EAS ABS has a €2,300 price advantage, at €11,680 MSRP.

Ducati Scrambler Will Be “Made in Thailand”

Almost four years ago, we reported on Ducati opening a new assembly plant in Thailand. The move, which peeved Ducati’s factory workers, would see bikes destined for the Southeast Asian market assembled in the Thai plant, thus side-stepping many of the region’s aggressive tariffs on motorcycles. Nearing the end of 2014 now, and our Bothan Spies report that the Ducati Scrambler models will be the first motorcycles assembled in Ducati’s Thai plant that will then be shipped to the world market — a move that comes right after Ducati reached a new contract with its workers and unions, which sees the factory employees working fewer hours at higher wages.

Up-Close with the Yamaha YZF-R3

This week we not only go a chance to see the 2015 Yamaha YZF-R3 unveiled at the AIMExpo, but also we had the chance to see the R3 up-close in the flesh. The budget-minded sport bike shows the obvious signs of more cost-effecient construction and fitted components, yet retains the fit-and-finish you would expect from a Yamaha motorcycle. This makes the R3 a prime candidate for aspirational riders, who want an affordable first motorcycle that looks the part of a proper sport bike. Track enthusiasts and veteran riders though will be disappointed with the Yamaha YZF-R3’s non-adjustable KYB suspension, box swingarm design, and bulky chassis — this is still a 368lbs (wet) motorcycle.

Even More Photos of the 2015 Yamaha FJ-09 Leak

Yesterday we brought you the first official photo of the Yamaha FJ-09 tourer, which had been accidentally added to the Yamaha FZ-09 gallery on the Yamaha NA press site. Today it seems that leaks in Yamaha continue for the FJ-09, as our Dutch friends at Nieuwsmotor have discovered a bevy of press images, ahead of the 2015 Yamaha FJ-09’s debut at EICMA next month. Based around the FZ-09/MT-09 platform, the FJ-09 uses a similar three-cylinder engine as the sport nakeds, though looks to have more suspension travel and other touring elements. Picking up where the Yamaha TDM left off as a middleweight sport/adventure-tourer, the Yamaha FJ-09 could be a very interesting addition to Yamaha’s lineup.

Up-Close with the Kawasaki Ninja H2R

Asphalt & Rubber was on-hand for the AIMExpo in Orlando, covering the new bikes that are debuting on North American soil. We’ve already seen the new Yamaha YZF-R3 released here, as well as the Alta RedShift electric motorcycles (formerly BRD Motorcycles). While both bikes are impressive, and are massively important to the American motorcycle scene, the buzz remains about the Kawasaki Ninja H2R. The AIMExpo is the first venue for Americans to get a glimpse of Kawasaki’s hyperbike, and the H2R sits like a praying mantis, waiting to strike you with its supercharged charms. Naturally, we had to get a closer look…and bring you a bevy of high-resolution detail shots from the trades how floor. Enjoy!

2015 Yamaha FJ-09 Leaked ahead of EICMA

Someone at Yamaha is going to get a stern talking to today, as it seems a photo of the still unreleased Yamaha FJ-09 made its way to Yamaha’s press site accidentally, and didn’t yank it down before our friends at Common Tread caught a glimpse of it. Mixed in with photos of the Yamaha FZ-09, the photo of the 2015 Yamaha FJ-09 doesn’t really give too much away from the machine, as we’ve seen the same shot in black & white already. However, since it’s the new bike season, and Yamaha has already shown the YZF-R3 and teased the all-new YZF-R1, we thought it would be appropriate to show you this new model in all its glory. Based off the FZ-09 platform, the FJ-09 will be Yamaha’s budget-minded sport/ADV-touring machine, picking up were the old Yamaha TDM left off.

Ducati 1299 Will Have “Tiptronic-Like” Shifting

If there is a common thread for Ducati’s upcoming EICMA reveal, it is the influence and benefits of owner Audi AG. We have already seen the German car manufacturer’s variable valve timing technology find its way into the Testastretta engine, in the form of Desmodromic Variable Timing (DVT). Our sources say that the all-new Ducati Multistrada, which will debut in just a few weeks’ time, will be the first model equipped with DVT. While Ducati ups its ante in the ADV market, our Bothan spies have tipped us off to another piece of Audi tech that will find its way onto a Ducati motorcycle, as the 1299 will received a “Tiptronic-like” gearbox that allows for touch-button upshifts and downshifts.

Yamaha YZF-R3 Revealed – 321cc Twin Coming to the USA

The rumors were true, Yamaha is bringing a special small-displacement model to market, the Yamaha YZF-R3. As the name indicates, the new R3 gets a fuel-injected displacement bump over the R25, to the tune of 321cc. Debuted at the AIMExpo today, the Yamaha YZF-R3 is coming to the USA, with a price tag of $4,990. Said by Yamaha to have “class-leading power”, the new R3 finally adds a small-displacement sport bike to Yamaha’s North American lineup, and makes an attractive offering when compared to the other 250cc/300cc machines from the other Japanese manufacturers. Expect to see it in Yamaha dealers, starting January 2014. Yamaha North America expects the YZF-R3 to be the volume leader for the company in the USA and Canada, and rightfully so.

Ducati Announces DVT — Desmodromic Variable Timing

As was teased, Ducati is unveiling its “DVT” technology today, which stands for Desmodromic Variable Timing, and to showcase that technology (borrowed from Volkswagen), Ducati has produced the first motorcycle engine with variable valve timing on both the intake and exhaust camshafts. Adapted to the now-called Ducati Testastretta DVT engine, which we reported will debut first on the new Ducati Multistrada for 2015, Ducati’s new v-twin powerplant can change the intake and exhaust timing independently, and throughout the rev range. This means that the Ducati Testastretta DVT engine can be optimized for peak power at high rpms, while maintaing rideability and smoothness at lower rpms — not to mention keeping with emission and noise regulations throughout the rev range.

2011 Aprilia RSV4 R APRC – WSBK Tech for the Masses

02/25/2011 @ 11:50 am, by Jensen Beeler14 COMMENTS

2011 Aprilia RSV4 R APRC   WSBK Tech for the Masses 2011 Aprilia RSV4 R APRC white 635x502

Fresh off its victory in the 2010 FIM World Superbike Championship, Aprilia is bringing its WSBK tech to the masses. Designated as Aprilia Performance Ride Control (APRC), The Italian company first debuted its 8-stage adjustable traction control, wheelie control, launch control, and a quick shifter package on the 2011 Aprilia RSV4 Factory APRC, which debuted at the 2010 EICMA show. Now the company from Noale is bringing that same electronics package to its more affordable Aprilia RSV4 R street machine as a standard feature on the 2011 Aprilia RSV4 R APRC.

Along with the added APRC system, the Aprilia RSV4 R APRC features an improved motor lubrication system, and the first three gears are spaced for better acceleration. The exhaust system has also been lightened by 2kg (just under 5 lbs).

The 2011 Aprilia RSV4 R APRC also comes with the same 200/55 x 17 dual-compound rear tire that’s found on the Aprilia RSV4 Factory APRC. Other changes include lighter wheels, a fully-adjustable Sachs rear shock, better fuel consumption, and some new graphics. Pricing will be $16,999 in the United States, and £13,999 (exc. OTR) for our brothers in apex across the pond.

2011 Aprilia RSV4 Gets 186hp & Traction Control

09/18/2010 @ 12:22 pm, by Jensen Beeler3 COMMENTS

2011 Aprilia RSV4 Gets 186hp & Traction Control 2011 Aprilia RSV4 traction control 623x494

The guys at the Aprilia Forum have gotten word that the 2011 Aprilia RSV4 will get an 8hp power increase, bringing the 999cc V4 motor to a total claimed output of 186hp. Also as expected by us back in June, the 2011 Aprilia RSV4 will see the introduction of Aprilia’s traction control system (ATC). The 2011 Aprilia RSV4 will make its extra horsepower by raising the cylinder compression ratio via high compression pistons, and using a different timing chains. Other changes include a different exhaust can (smaller), and gearing changes (taller: 1st, 2nd, 3rd, shorter: 4th, 5th, 6th, with a larger 42 tooth rear sprocket).

Replacement Motors Arrive for Aprilia RSV4 Recall

02/23/2010 @ 2:03 pm, by Jensen Beeler1 COMMENT

Replacement Motors Arrive for Aprilia RSV4 Recall aprilia rsv4 motor 560x410

Aprilia USA, the North American importer and distributor of Aprilia Motorcycles and scooters has sent out an update on the recall for the 2010 Aprilia RSV4‘s motor, saying that replacement motors from Italy have arrived, and that the company is ready to begin replacing affected machines. Aprilia USA expects the recall to take two to three weeks to replace every RSV4 motor sold in the USA, but it’s unclear how long it will take for the Noale brand to recover its lost footing with would-be Aprilia purchasers.

Aprilia RSV4 R Technical and Design Line Drawings

11/24/2009 @ 4:08 pm, by Jensen Beeler3 COMMENTS

Aprilia RSV4 R Technical and Design Line Drawings Aprilia RSV4 R technical design line drawing 1 560x356

Taking a motorcycle off the computer screen and into real life is a difficult process, and we always enjoy seeing an insight to that undertaking. As such, we present to you some wireframe drawings of the 2010 Aprilia RSV4 R to drool over. On a side note if you’re in the market for an RSV4, these images are the perfect template for designing your own bike paint scheme. Photos after the jump.

2010 Aprilia RSV4 R and RSV4 Factory MSRP Pricing Revealed – Headed to US Dealerships Soon

10/14/2009 @ 12:48 am, by Jensen Beeler4 COMMENTS

2010 Aprilia RSV4 R and RSV4 Factory MSRP Pricing Revealed   Headed to US Dealerships Soon aprilia rsv4 r price msrp dealership 560x434

Piaggio dealers meet this week in LA, and the news coming from the meeting is that the 2010 Aprilia RSV4 R and RSV4 Factory are already on their way to dealer floors. Also leaked from the meeting are the bikes’ MSRP pricing. The RSV4 R will start at $15,999, while the RSV4 Factory will set you back an additional five grand, or $20,999.

Spyshots: RSV4 R “Base” Model Revealed!

07/22/2009 @ 8:30 pm, by Jensen Beeler1 COMMENT

Spyshots: RSV4 R Base Model Revealed! Aprilia RSV4 R base 5 560x373

Ask, and yee shall find. Within a couple hours of posting the rumor that Aprilia releasing a “base” model RSV4, we get word of spy shots of the rumored bike. Photos confirm Showa forks relpacing the Öhlins units up front, and that the RSV4 looks damn sexy in all black. More news as we get it. Big ups to Michel!

RSV4 R “Base” Model in the Paddock:

Aprilia RSV4 “Base” Model in 2010?

07/22/2009 @ 3:31 pm, by Jensen Beeler4 COMMENTS

Aprilia RSV4 Base Model in 2010? Aprilia RSV Factory 560x466

The Aprilia RSV4 hasn’t even reached dealers in the US yet, and there’s already speculation for what’s to come next year. With BMW finally spilling the beans on its pricing structure for the S1000RR, it should seem clear that Aprilia is going to have a lot of trouble hocking the long awaited RSV4 at the likely $6,000 price surplus that the RSV4 is going to have over the Japanese and new BMW.

To combat this, there is speculation starting to go around that Aprilia will release a “base” model (they don’t like calling it a base model, but that’s what it is) later in 2010, in order to compete with the cheaper models. Rumors peg the base model price to be about $4,000 less than the Factory model, which is due to come out later this year.