Another Ducati Scrambler Is Coming

The Scrambler Ducati models started out as a bid to capture the budding crop of millennial riders, who eschew from the current crop of values and segments that prop-up the motorcycle industry. For the past few months now, we have been hearing about the next model(s) to come for the Scrambler Ducati line (you can hear more about it on this episode of the Two Enthusiasts Podcast, by the way), and now we are seeing our first glimpse of those machines. Recent spy shots have been circling the internet this week, and they give us our best glimpse of what to expect from Ducati at the upcoming motorcycle trade shows.I’m talking about the “Scrambler 1100 Enduro” – as the press is calling it – which will slot in above the Ducati Scrambler “800” bike, and offer more off-road prowess to the Scrambler name.

California Formalizes Lane-Splitting Law

It finally happened, Governor Jerry Brown signed AB 51 into law, making California the first state to put lane-splitting on its books. Lane-splitting has always been legal of course (despite what other headlines might suggest), though was legal only by a technical loophole in the California Vehicle Code (CVC). The passage of AB 51 now formally adds lane-splitting as a condoned practice by the CVC; and more importantly, it expressly allows government agencies, like the California Highway Patrol, to create and teach best-practice guidelines. AB 51 still creates some basic jurisprudence issues, like granting legislative powers to the executive branch, but many in the pro-lane-splitting movement seem to look past that issue, instead focusing on what it brings to motorcyclists.

EPA Slaps Harley-Davidson with $12 Million Fine

The EPA DOJ have just come to a settlement agreement with Harley-Davidson, which sees the American motorcycle manufacturer agreeing to pay a $12 million fine for its Screamin Eagle “super tuner” devices. Also in the agreement, Harley-Davidson agrees to spend $3 million to mitigate air pollution (through a project to replace conventional woodstoves with cleaner-burning stoves in local communities), as well as to stop selling, buy back, or destroy any illegal devices that increase air pollution from the company’s motorcycles. While not quite the Dieselgate scandal that caught Volkswagen circumventing EPA emission standards, Harley-Davidson’s “super tuners” do provide an aftermarket solution for motorcyclists to circumvent the emission devices on their motorcycles.

Moto3: Sky VR46 Fires Romano Fenati

As expected, Romano Fenati has been formally released from his contract with the Sky VR46 team. The Italian was suspended from the team after an incident at the Red Bull Ring in Austria. That was a temporary measure, but it has now been made permanent. Fenati was released for behavioral issues. The Italian had been abusive towards members of the team, and had not behaved in a professional manner. The incident in Austria was just the latest in a long line of breaches of behavioral conduct, which included confirmed reports of verbal abuse and unconfirmed and unsubstantiated reports of physical conflict. The Sky VR46 team have announced that they will be bringing Lorenzo Dalla Porta in to join Andrea Migno and Nicolo Bulega in the Moto3 team.

Two New BMW R nineT Models Coming

Filings with the California Air Resources Board (CARB) suggest that BMW Motorrad has two more variations of its retro-styled motorcycle line coming to the USA: the BMW R nineT Pure and the BMW R nineT Racer. These two bikes would join the other two air-cooled models we have already seen from the Germans, the base model BMW R nineT and the recently released BMW R nineT Scrambler, which debuted at EICMA last year. Our friends at Motorcycle.com spotted the CARB filings, and believe one of the machines will be based off the BMW Lac Rose concept – an ADV throw-back to when the Dakar Rally actually raced to Dakar. The other model though, could be anyone’s guess, as BMW hasn’t dropped any other concepts or hints in the past months.

Q&A: KTM On-Road Technical Director Sebastian Risse – The Development of the KTM RC16 MotoGP Bike

Sebastian Risse is the man behind the KTM RC16 MotoGP bike which was presented on Saturday at the Red Bull Ring. An automotive engineer by training, Risse has been with KTM since 2008. He started out as a crew chief and chassis analyst on KTM’s now defunct RC8 Superbike project, but when KTM returned to Grand Prix racing in 2012, Risse took charge of the Moto3 project, which has gone on to be the benchmark in the class. Risse is currently head of all of KTM’s roadracing activities, and has overseen and led development of the RC16 MotoGP bike. After the KTM RC16 was presented, we spoke to Sebastian Risse about the differences and design choices which went into the bike.

Here’s a Custom Ducati XDiavel by Roland Sands Design

In the event’s 76-year history, this year marks the first time that Ducati has ever participated at the Sturgis Motorcycle Rally – the Italian company hoping to showcase its Harley-Davidson alternative, the Ducati XDiavel. Helping fuel that fire was a collaboration between Roland Sands Design and Ducati, which has given way to the creation of a one-off XDiavel with the usual RSD touches. This means a flowing single-piece body, the addition of a 19″ front wheel, and shotgun-style exhaust are added to the already stylish XDiavel. The RSD Ducati XDiavel is then finished off with metallic flake paint job, along with the usual bits and bobs from the RSD catalog. There is a lot of “Southern California” transmitted through RSD’s design into the Italian-born XDiavel.

2017 KTM RC16 Officially Debuts

The Austrian GP might be tomorrow, but today the news is all about MotoGP’s newest entrant, KTM Racing. The Austrian team used its home to debut officially its MotoGP program, showing the KTM RC16 MotoGP race bike in its officially Red Bull livery for next year. The livery itself is what you would expect between at KTM/Red Bull collaboration, with the same blue and orange paint scheme as can be found on the Red Bull KTM Moto3 squad. The big difference of course is the rumored fire-breathing, 270hp, V4, engine, which Bradley Smith and Pol Espargaro will attempt to tame. The bike’s next outing will be at Valencia, where Thomas Lüthi and Mika Kallio will ride with the MotoGP-regulars once again, competing as wild card entries.

MotoGP Considering Team Communication via Dashboards

Dorna is considering allowing communication between teams and riders via the dashboard. At a meeting today between Dorna and the teams, initial discussions took place over a system to allow teams to pass very brief messages to the dashboard of the bikes. The ability to pass messages between team and bike has been made possible thanks to the transponders currently being used in MotoGP. Those allow for a very limited and very short burst of communication as the bikes pass the timing loops at the track. Race Direction is currently using the system to pass signals to the dash in the case of a red flag, black flag or ride through penalty, but the system would also allow teams a limited ability to pass messages to the riders.

Norton Announces V4 Superbike, Again

A year ago, to the day, Norton announced that it was working on a street-going superbike that featured a 200hp, 1,200cc, V4 engine. Now, Norton confirms that news, saying that we will see the limited-production (200 units) machine later this fall. Yay. On the bright side, Norton posted a concept drawing of the new bike to its Facebook page, giving us at least something new to whet our appetites on the new motorcycle. The concept looks very similar to the sketch we saw last year, making today’s new a little bit about nothing. But, our friends at MotoFire report that Norton is still working on a 650cc project, which will debut later this year as well.

MotoCzysz D1g1tal Dr1ve to Power Cars

08/26/2010 @ 2:58 pm, by Jensen Beeler4 COMMENTS

MotoCzysz is partnering with Indiana-based Remy Electric Motors to bring the electric motorcycle power plant to the four-wheeled world. Remy, a former division of General Motors that specialized in electric and hybrid powertrains, developed the D1g1tal Dr1ve system used in the TT Zero and e-Power winning E1pc. According to Remy the D1-10 electric motor makes 135hp and 250 lbs•ft of torque, all while in a compact form-factor. With power outputs likely to improve, and the small footprint of the D1-10, the potential for the collaboration in four-wheeled vehicles is certainly beyond intriguing.

Up-Close with the TT Winning MotoCzysz E1pc

06/10/2010 @ 6:23 pm, by Jensen Beeler1 COMMENT

Last week we got a leaked photo of the 2010 MotoCzysz E1pc, and knew the bike would be a contender in today’s TT Zero at the Isle of Man. Now that the TT for electrics is over, we can get a closer look at the machine that left the competition behind in the dust. MotoCzysz was a scratch at last year’s TT, and following that mantra the team effectively started-over from scratch for their 2010 effort. Back for 2010, there is of course the familiar MotoCzysz-designed 6X Flex front-end suspension system, but the rest of the bike centers around a revised energy package that’s been refined to engineering simplicity.

We’ve already covered how the central “suitcase” or eDD incorporates space maximizing v-shaped removable battery packs that pop-out with the push of a button. And how the entire 2010 MotoCzysz E1pc involves virtually no wiring, since everything dovetails perfectly together. We’ve also covered how the MotoCzysz D1-10 motor is replacing the three Agni motors from last year’s bike. Running off nearly 500 volts of power, the liquid-cooled IPM motor makes 250lbs•ft of torque, and generates over 100hp. The aerodynamics of the 2010 bike have been completely rethought, and employ a palatable design that achieves the aerodynamic goals to give the team a greater advantage with their limited on-board energy.

All of this is well and good, but it doesn’t mean shit if the bike doesn’t go fast.

Video: MotoCzysz D1-10 Electric Motor on the Dyno

04/18/2010 @ 5:03 pm, by Jensen Beeler8 COMMENTS

While the video of MotoCzysz putting their new D1-10 electric motor up on the dyno is not terribly captivating (it’s hard to see anything really moving since all the fun bits are inside the motor’s casings), the performance figures the company quotes surely are impressive. The liquid-cooled IPM motor makes 250lbs•ft of torque, generates over 100hp, and employs a proprietary cooling system to allow a higher percentage of that peak power to be used over extended periods of time. This is particularly important because of the large gap between peak power figures and sustainable power figures in the electric motorcycle world, with the latter being the more important figure to quote.