“Stop Sale & Stop Ride” Issued for the Polaris Slingshot

Polaris Slingshot owners should take note, as Polaris Industries issued a “Stop Sale & Stop Ride” this week for two issues found on the Slingshot. As the name implies, this special recall advises all Slingshot owners to stop riding their three-wheelers, and all Slingshot dealers to stop selling the vehicles, until the two issues are resolved. The first issue involves the ball bearings on the steering rack, which have been deemed faulty by Polaris. It’s been determined that because of the faulty ball bearings on the Slingshot, the steering system could fail, resulting in an unexpected total loss of steering. The second issue involves the roll hoops over the driver and passenger seats on the Slingshot.

Report: Honda RC213V-S Priced at ¥20 Million

According to a report made by The Asahi Shimbun, Japan’s second largest daily newspaper, Honda has green-lit the RC213V-S project, with a price tag of 20 million yen — roughly $170,000 USD. The Honda RC213V-S debuted at the 2014 EICMA show, and was as advertised: a MotoGP race bike with lights and mirrors added to it. Honda teased show-goers and the media by say that the RC213V-S model was only a prototype, adding more fuel to the speculation regarding whether the Japanese firm would actually produce the long-awaited model. Since its inception, price figures have been rumored and banded about, almost all of which were in the six-figure category.

Polaris Acquires Electric Motorcycle Business from Brammo

Polaris Industries has acquired the electric motorcycle business from Brammo, Inc. Polaris is also acting as a leading investor in the recapitalization of Brammo, which will enable Brammo to focus exclusively on the design, development, and integration of electric vehicle powertrains. This means that Polaris will takeover building electric motorcycles at its Spirit Lake, IA production facility, and that Brammo will continue developing EV powertrains for Polaris and other OEM partners. According to its press release, Polaris will start production of electric motorcycles in the second half of 2015.

Ducati Sets Sales Record for 2014 – 45,100 Bikes Sold

Ducati Motor Holding is reporting another record sales year, and that the Italian motorcycle manufacturer sold 45,100 bikes in 2014. This marks the fifth year in a row that Ducati has shown sales growth, and it’s the third year in a row that the sales figures have been an all-time record for the Italian brand. Sales for 2014 were up 2% over 2013, with the USA again leading as Ducati’s most important market (8,804 units sold in the USA). Unsurprisingly, the Asian market is growing quickly for Ducati as well, up 11% in 2014. Ducati attributes its sales growth in-part to its new water cooler Monster line, where the Ducati Monster 1200 and Ducati Monster 821 helped raise Monster sales by 31%, with 16,409 new bikes sold in 2014.

Newspeak: The Advent of the “Adventure-Sport”

In the past decade the ADV segment has been a confusing amalgamation of differing interests, and over that time-period, two distinct groups have boiled to the surface. First there are the “Long Way Round” hopefuls, who invariably own a BMW R1200GS/A, and seem to be on some sort of perpetual preparation for an African safari. More recently, a second group has appeared: those riders who look to these big ADV bikes as more versatile Sport-Touring machines. All these riders, and their bikes, have been wedged into a single “Adventure” category, and it has created a bit of confusion for the segment. So, I want to introduce the concept of the “Adventure-Sport” and how it differentiates from the previous “Adventure-Touring” category.

MotoGP: Ducati’s Desmosedici GP15 Officially Delayed

As had been widely expected, Ducati will not have the GP15 ready for the first test at Sepang, in early February. In an interview with the MotoGP.com website, due to be shown on 19th January, Ducati Corse boss confirmed that work was still underway on the all-new bike; and that instead, Ducati will be bringing an uprated version of last year’s bike, dubbed the GP14.3, to test aspects of the new design not requiring the new engine. The delays have been trailed by both Dall’Igna and Paolo Ciabatti, speaking to the media at the Valencia test and at the Superprestigio dirt track event in December. The GP15 is a completely new bike, designed from the ground up, with a completely redesigned engine.

1972 Honda CB500, 3D Printed to Life Size

We’ve talked a bit before about the virtues of 3D printing, and how this increasingly affordable technology could change the consumer landscape as far as how we buy basic parts in the motorcycle industry. For as practical as how 3D printing, or rapid prototyping, can be, it can also be beautiful and used for art. This story is sort of a merger of those two ideas. Jonathan Brand has hoped to buy a 1972 Honda CB500 motorcycle, but the birth of his son changed that plan. Where there is a will though, there is a way, and Brand came up with the next best thing — he built a life-size model of a CB500 with his 3D printer.

Mercedes CEO: No Further Acquisition of MV Agusta

Italians are rejoicing over the news that Mercedes-Benz CEO Dieter Zetsche has made it clear that the German car manufacturer is not interested in acquiring more of MV Agusta’s private stock. Loyal readers will remember that Mercedes-AMG purchased 25% of MV Agusta last October, for a rumored €30 million — echoing the move Audi made in Ducati. Talking at the North American International Auto Show in Detroit though, Zetsche said “however, to avoid what happened with Ducati we point out that we have no intention to take over the business or produce motorcycles. MV Agusta can do it better than us.”

Triumph Has Its Best Sales Year Since Its Rebirth

Good news for Triumph Motorcycles fans, as the British motorcycle marque is reporting a banner year for 2014 — with 54,432 units sold worldwide. That figure is up 4% over 2013’s sales figure of 52,089 units, which was the first time that Triumph broke the 50,000 unit mark since the company’s rebirth in 1984. Helping Triumph reach this new high-water mark was the company’s home market, where Triumph accounted for one-in-five motorcycles sold in the UK (over 500cc). Overall, Triumph saw 8% growth in the UK, as modest growth considering the British market was up roughly 10% last year. The news is not all good, however. Triumph previously reported that financial figures for the first-half of 2014 were down, with revenue down £364 million from £369 million, and net income at a loss of £8 million.

Husqvarna 401 Concepts Will Be 2017 Production Models

One of the more intriguing things to come out of the 2014 EICMA motorcycle show in Milan were Husqvarna’s two “401” concepts, the Vitpilen and Svartpilen. The café-styled bikes are based off the KTM 390 Duke platform, though you wouldn’t know it from looking at them. Husqvarna said at EICMA that if there was sufficient interest, the Vitpilen and Svartpilen could go into production. With an overwhelming critical response from the press and fans, it should come no surprise then that our friends at Bike.se are reporting that Husqvarna intends to make the small-displacement machines a part of its 2017 model lineup.

Listen to the KTM Moto3 Race Bike Purr

02/21/2012 @ 11:46 am, by Jensen Beeler23 COMMENTS

The KTM Moto3 racer is a thing of beauty, and for bonus points, it comes in two varieties. One is the orange-trellis framed factory-built KTM, which will be campaigned by the three-rider factory team of Sandro Cortese, Danny Kent, and Arthur Sissis for 2012.

The other variety is the one engineered by Kalex Engineering, which features the same 250cc KTM motor as the factory version, but takes the German company’s prowess at chassis design, and uses a twin-spar aluminum frame instead of the factory team’s trellis variant. The venerable Team Aspar is one of the teams signed on to use the Kalex/KTM, and will have riders Alberto Moncayo & Hector Faubel aiming to beat the factory KTM squad at their own game.

With no Americans in Moto3, the entry-level GP series won’t get too much attention here in the US, but the machinery certainly looks pretty good to our eyes. Still clad in carbon fiber for the testing season, the KTM and KTM/Kalex machines are like tiny pieces of motorcycling art.

Though some are lamenting the passing of the two-stroke era, and its unmistakable buzzing sound on the track, we think the newest four-stroke GP class will please motorcycling’s audiophiles. Listen to the KTM Moto3 race bike warm up after the jump, and enjoy some eyecandy.

First Look: KTM Moto3 Race Bike

10/06/2011 @ 6:52 am, by Jensen Beeler34 COMMENTS

KTM has finally given us a glimpse into its Moto3 class race bike, showing renders of the bike to journalists assembled at the company’s Hangar 7 press event. The Austrian company also officially showed its Moto3 race motor, and for those expecting to see a repurposed SX motor for the 250cc four-stroke Grand Prix racing series, abolish that thought. For the inaugural 2012 racing season for GP racing’s entry-level series, the Austrian company has started from scratch when approaching its Moto3 development.

KTM Developing Two Moto3 Bikes with Kalex Engineering

06/03/2011 @ 8:56 am, by Jensen Beeler7 COMMENTS

KTM has announced it will be entering the Moto3 Championship, building a 250cc single-cylinder bike in what the company is describing as an 100% in-house operation. This statement is a bit confusing though, as KTM will also be partnering with Kalex Engineering on a second bike, where KTM will help the German company by supplying their race motors. No riders have been confirmed on either the KTM or KTM/Kalex machines.

KTM’s return to international road racing is certainly a welcomed sight, and it’s interesting that the Austrian company is both building its own bike, and supplying motors to other outfits. Both the KTM and KTM/Kalex machines will have to compete against the Honda NSF250R race bike, which Honda debuted at the Catalan GP just yesterday.

Toni Elias to Moto2, Alex de Angelis to Scot Honda?

10/22/2009 @ 10:14 pm, by Jensen Beeler4 COMMENTS

Scot-Honda-Racing-bike-close-up

Reports are coming in that Alex de Angelis will be headed to Scot Honda (thus ending any rumor that Toni Elias would be joining the satellite Honda team), and that Elias will be headed to Moto2 with the Sito Pons team. Kalex Engineering is expected to be providing Sito Pons with one of their Moto2 chassis solutions. You may remember Kalex from their gorgeous liter-bike track weapon we ran a couple months ago. While many are reporting these moves as fact, their appears to be some margin of uncertainty in the plan.