Brad’s Leggero by Walt Siegl

The latest creation from Walt Siegl Motorcycles, Brad’s Leggero helps fill the void left behind by the departure of the Ducati Sport Classic from the Italian company’s lineup. Speaking to those who long for simpler machines, at the core of the Leggero is an air-cooled two-valve Ducati engine, which was built and blueprinted by Bruce Meyers Performance. Helping complete the café racer look is the bullet fairing bodywork, which takes a dash of modern by being made of Kevlar. The modern touches continue, with the use Öhlins suspension and radially mounted Brembo brakes. The effect is a tastefully done café racer that not only shines with real craftsmanship, but also does post-heritage right: taking the best of design from the past, without snubbing the progress of technology in the future.

More Photos of the 2017 Yamaha YZF-R6

Loyal Asphalt & Rubber readers will know how much we like our high-resolution photos here at A&R, so we wanted to make sure you could get a good high-res look at the 2017 Yamaha YZF-R6 that debuted today at the AIMExpo in Orlando, Florida. Yamaha has left its class-leading bike mostly unchanged for the next model year, when it comes to the R6 motor and chassis, which might disappoint some. But with the addition of R1-inspired styling, traction control, ABS brakes, and better suspension pieces, we think supersport fans will be pleased with this update. With the bar now set higher in the 600cc realm, hopefully we will see other manufacturers take up the challenge, and the supersport class will have new life breathed into it. We’ll have to wait and see on that. Until then, enjoy this modest photo gallery.

2017 Yamaha YZF-R6 Gets ABS, Traction Control, & More

The wait is finally over, as the 2017 Yamaha YZF-R6 debuted today at the AIMExpo in Orlando, Florida. As expected, the new Yamaha R6 visually borrows from the recently updated R1, with a similar headlight and intake setup featuring now on both machines. On the technical side of things, the 2017 Yamaha R6 is more evolution than revolution, with the basic chassis and engine configuration staying the same. However, updates for 2017 include a revised suspension package, ABS brakes, riding modes via ride-by-wire, traction control, and an optional quickshifter. While more of a model refresh, than an all-new model, Yamaha has gone to great lengths to improve upon a machine that is already leading the supersport category.

HJC Is Coming Out with Star Wars Themed Helmets

Pardon me while I geek out, just a little bit. It looks like HJC has gotten the rights to make Star Wars themed helmets for their 2017 collection. Right now, HJC is showing two helmets, one that mimic’s Kylo Ren’s helmet in The Force Awakens, and the other that replicates Boba Fett’s iconic lid. Both of these themed helmets are based off the HJC RPHA 11 helmet, the company’s top-of-the-line helmet, which also serves as a platform for HJC’s other branded, tribute, and special edition helmets. There will also be a “Death Trooper” helmet, based on the HJC FG-17 helmet, that will debut in time to milk interest from the opening of Rogue One. It should be noted that rumors about a possible Princess Lela helmet, with side-mounted hair buns, are unfounded and possibly started by this publication.

2017 Aprilia Tuono V4 1100 Factory – Just Add Öhlins

It goes without saying that if the 2017 Aprilia Tuono V4 1100 is getting a list of updates at INTERMOT, then the same must be true for the Factory version of the potent 175hp streetfighter. This means that the 2017 Aprilia Tuono V4 1100 Factory takes the new fourth-generation APRC electronics package, Bosch-powered cornering ABS, improved combustion chamber, larger exhaust can, and adds to it the typical Factory-spec improvements like Öhlins suspension (including an Öhlins steering damper). If you haven’t ridden the Aprilia Tuono V4 1100 RR or Factory, we highly recommend it – they’re so choice. The Aprilia Tuono V4 1100 easily competes as one of our favorite motorcycles at Asphalt & Rubber.

2017 Yamaha MT-10 SP – Putting the Europeans on Notice

What you’re looking at is the 2017 Yamaha MT-10 SP, a new edition of Iwata’s crossplane-power streetfighter. Despite being just a few bolted-on parts, the Yamaha MT-10 SP is one of the more interesting machines to debut in INTERMOT today. This is because it pits the Yamaha MT-10 directly against the streetfighter offerings from the European brands – something that was already occurring with the MT-10/FZ-10, even if it was unintended. The Yamaha MT-10 SP though gives the Japanese a more proper machine to go toe-to-toe with the likes of the Super Duke R, Tuono V4 1100, and other models. To do this, Yamaha has added semi-active suspension, courtesy of Öhlins. A quickshifter has also been added, along with an assist & slipper clutch.

The Yamaha MT-09 Gets a Facelift & More for 2017

Yamaha’s MT line runs with the tagline “The Dark Side of Japan” and promises edgy and affordable street bikes for urban riders. Someone in Iwata, Japan must have thought that the current Yamaha MT-09 wasn’t quite edgy enough though, which is the only way we can explain the 2017 Yamaha MT-09, which debuted today at the INTERMOT show in Cologne, Germany. Now with a “twin-eyed” LED headlight design, the Yamaha MT-09 feels a little bit more at home when parked next to the Yamaha MT-10 / Yamaha FZ-10 streetfighter. Other changes include an assist/slipper clutch, quickshifter, new suspension, and a redesigned tail section and fender.

Honda CBR1000RR SP2 – Big Red’s New Racing Platform

The current state of the World Superbike Championship rules entirely encourage the adoption once again of “homologation specials” – production bikes whose sole purpose is to be used on the race track. While none of the manufacturers have adopted a radical approach with their homologation special designs, this year’s INTERMOT show has already seen several such machines introduced, the Kawasaki Ninja ZX-10RR, the Suzuki GSX-R1000R, and the Honda CBR1000RR SP2. For Honda, the differences between the SP and SP2 aren’t terribly radical, but they are more purposeful. The 2017 Honda CBR1000RR SP2 does come with several visual cues that are different from the CBR1000RR SP model: carbon insert panels, gold striping on the tri-color paint scheme, and the more obvious Marchesini wheels.

2017 Ducati SuperSport – The Sport Bike Returns

The Ducati SuperSport is back for the 2017 model year, bringing a street-focused sport bike into Ducati’s motorcycle lineup once again. As you would expect, the 2017 Ducati SuperSport will come in two models, the SuperSport base model and a higher-spec SuperSport S model. Both bikes use the 937cc, water-cooled, 113hp v-twin engine that’s found in the Ducati Hypermotard 939. Ducati has also used a steel trellis frame for the SuperSport, which looks very similar to the one used on the current Monster line. Obviously, the front fairing takes some cues from the Panigale superbike. Ducati’s focus is for the SuperSport to augment its street lineup with something sporty that could go on the race track, but would be more at home on twisty roads, even with a passenger on the back.

2017 Honda CBR1000RR SP – Proving Patience is a Virtue

The wait is over. The most anticipated motorcycle of the INTERMOT show is here, the 2017 Honda CBR1000RR SP. We have seen the spy photos of this new superbike, we have seen leaked details on this superbike, and we’ve mused endlessly about this new superbike. And now, we can finally replace that conjecture with fact. First off, the rumors were true. The 2017 Honda CBR1000RR SP sheds a massive 15 kilograms off its bulk, which translates into a 441 lbs mass at the curb. Power has also been increased by almost 11hp, for a total of 190hp at the crank. Honda says that these two figures combined mean a 14% increase in the Honda CBR1000RR’s power-to-weight ratio. That’s pretty astounding, when you consider that under the new fairings is still mostly last year’s bike.

Motus MST Drops GDI in Favor of Port Fuel Injection

03/13/2012 @ 2:49 pm, by Jensen Beeler26 COMMENTS

It is a rarity that an A&R reader is better informed than us on a topic, but one of the great things about online media is that there is an instantaneous two-way dialogue on every subject we publish. As such, a special hat-tip goes out to commenter “Bob” who spilled the beans that Motus had dropped gasoline direct injection (GDI) for the Motus MST sport-tourer that the company is soon to unveil at the Daytona Bike Week. We followed up the comment with Lee Conn, President and Co-Founder of Motus, about the comment, where he confirmed that Motus would adopt a port fuel injection & ride-by-wire scheme instead of the heavily touted GDI setup.

“Having ridden the MST’s with GDI all over America, I can report that we pioneered a really cool GDI system and it works great,” said Lee Conn. “GDI is a modern, smart and efficient way to fuel an engine, but after a lot of discussions with dealers, customers, technicians, and tuners, we concluded that there is not enough support in the current industry to roll out this technology yet.” After seeing what bikes A&R commenters were using in comparison to the Motus MST, Lee made a joke about how the Motus team would have to rethink its product messaging, and then said something that is very central to the Motus MST ethos.

Motus to Reveal Production Plans at Daytona Bike Week

03/09/2012 @ 1:37 pm, by Jensen Beeler34 COMMENTS

The last time Motus Motorcycles graced the pages of A&R it was August 10th of last year — yes, I actually went back thru the pages to check that date. Since that time, the American motorcycle startup has been busy getting its sport-tourer finalized and ready for production. Launching the Motus MST prototype at the 2011 Daytona Bike Week, Motus Motorcycles will be returning to the Floridian biking event this year to announce its production plans, pricing, and availability of its American made motorcycle.

While we’ll have to wait to hear from Motus for its official plans, we expect to hear something along the line of a production run of under 300 units, with pricing in the $30,000+ range. Certainly exclusive, it remains to be seen if Motus can sell such an expensive sport-tourer without the gadgets and gizmos that normally accompany that market segment. Featuring the gasoline direct injection (GDI) 1,645cc KMV4 engine, the Motus MST will make over 160 hp from the power plant, which is also being sold as a crate motor.

Motus KMV4 Motor Will Be Available as a Crate Motor

08/10/2011 @ 12:02 pm, by Jensen Beeler13 COMMENTS

Talking to Lee Conn when Motus was on its US tour here in California, the Motus founder revealed that part of Motus’s business plan incorporates selling the Katech-designed KMV4 motor as a crate motor for enthusiasts and tuners. Though the Motus MST motorcycles will be using a 1,645cc 160+ hp version of the gasoline direct injection (GDI) motor, Katech and Motus have left plenty of beef to the KMV4’s cyclinder housings, allowing the V4 lump to be bored out to a 2L displacement.

Video: The Motus KMV4 GDI Engine

07/02/2010 @ 10:52 am, by Jensen Beeler14 COMMENTS

Motorcycle upstart Motus Motorcycles continues to press forward with its MST-01 sport-tourer, and has released a video that talks more about the development of their 1645cc gasoline direct-injection V4 motor: the KVM4. Balking at the advice of others not to build their own powerplant, Motus has teamed up with Katech to design an in-house motor for the Motus MST-01.

Motus MST-01: Direct Injection, 2 Valves per Cylinder, 1650cc, 140hp, Made in America

01/16/2010 @ 6:52 pm, by Jensen Beeler13 COMMENTS

Motus Motorcycles has trickled out a bit more information about its Made in America MST-01 sport-tourer, giving CycleWorld their obligatory first look. What do they have to report? A 1650cc V4 motor with two valves per cylinder that features direct injection, which sums up to equal 140hp. More on that and photos after the jump.