Report: Honda RC213V-S Priced at ¥20 Million

According to a report made by The Asahi Shimbun, Japan’s second largest daily newspaper, Honda has green-lit the RC213V-S project, with a price tag of 20 million yen — roughly $170,000 USD. The Honda RC213V-S debuted at the 2014 EICMA show, and was as advertised: a MotoGP race bike with lights and mirrors added to it. Honda teased show-goers and the media by say that the RC213V-S model was only a prototype, adding more fuel to the speculation regarding whether the Japanese firm would actually produce the long-awaited model. Since its inception, price figures have been rumored and banded about, almost all of which were in the six-figure category.

Polaris Acquires Electric Motorcycle Business from Brammo

Polaris Industries has acquired the electric motorcycle business from Brammo, Inc. Polaris is also acting as a leading investor in the recapitalization of Brammo, which will enable Brammo to focus exclusively on the design, development, and integration of electric vehicle powertrains. This means that Polaris will takeover building electric motorcycles at its Spirit Lake, IA production facility, and that Brammo will continue developing EV powertrains for Polaris and other OEM partners. According to its press release, Polaris will start production of electric motorcycles in the second half of 2015.

Ducati Sets Sales Record for 2014 – 45,100 Bikes Sold

Ducati Motor Holding is reporting another record sales year, and that the Italian motorcycle manufacturer sold 45,100 bikes in 2014. This marks the fifth year in a row that Ducati has shown sales growth, and it’s the third year in a row that the sales figures have been an all-time record for the Italian brand. Sales for 2014 were up 2% over 2013, with the USA again leading as Ducati’s most important market (8,804 units sold in the USA). Unsurprisingly, the Asian market is growing quickly for Ducati as well, up 11% in 2014. Ducati attributes its sales growth in-part to its new water cooler Monster line, where the Ducati Monster 1200 and Ducati Monster 821 helped raise Monster sales by 31%, with 16,409 new bikes sold in 2014.

Newspeak: The Advent of the “Adventure-Sport”

In the past decade the ADV segment has been a confusing amalgamation of differing interests, and over that time-period, two distinct groups have boiled to the surface. First there are the “Long Way Round” hopefuls, who invariably own a BMW R1200GS/A, and seem to be on some sort of perpetual preparation for an African safari. More recently, a second group has appeared: those riders who look to these big ADV bikes as more versatile Sport-Touring machines. All these riders, and their bikes, have been wedged into a single “Adventure” category, and it has created a bit of confusion for the segment. So, I want to introduce the concept of the “Adventure-Sport” and how it differentiates from the previous “Adventure-Touring” category.

MotoGP: Ducati’s Desmosedici GP15 Officially Delayed

As had been widely expected, Ducati will not have the GP15 ready for the first test at Sepang, in early February. In an interview with the MotoGP.com website, due to be shown on 19th January, Ducati Corse boss confirmed that work was still underway on the all-new bike; and that instead, Ducati will be bringing an uprated version of last year’s bike, dubbed the GP14.3, to test aspects of the new design not requiring the new engine. The delays have been trailed by both Dall’Igna and Paolo Ciabatti, speaking to the media at the Valencia test and at the Superprestigio dirt track event in December. The GP15 is a completely new bike, designed from the ground up, with a completely redesigned engine.

1972 Honda CB500, 3D Printed to Life Size

We’ve talked a bit before about the virtues of 3D printing, and how this increasingly affordable technology could change the consumer landscape as far as how we buy basic parts in the motorcycle industry. For as practical as how 3D printing, or rapid prototyping, can be, it can also be beautiful and used for art. This story is sort of a merger of those two ideas. Jonathan Brand has hoped to buy a 1972 Honda CB500 motorcycle, but the birth of his son changed that plan. Where there is a will though, there is a way, and Brand came up with the next best thing — he built a life-size model of a CB500 with his 3D printer.

Mercedes CEO: No Further Acquisition of MV Agusta

Italians are rejoicing over the news that Mercedes-Benz CEO Dieter Zetsche has made it clear that the German car manufacturer is not interested in acquiring more of MV Agusta’s private stock. Loyal readers will remember that Mercedes-AMG purchased 25% of MV Agusta last October, for a rumored €30 million — echoing the move Audi made in Ducati. Talking at the North American International Auto Show in Detroit though, Zetsche said “however, to avoid what happened with Ducati we point out that we have no intention to take over the business or produce motorcycles. MV Agusta can do it better than us.”

Triumph Has Its Best Sales Year Since Its Rebirth

Good news for Triumph Motorcycles fans, as the British motorcycle marque is reporting a banner year for 2014 — with 54,432 units sold worldwide. That figure is up 4% over 2013’s sales figure of 52,089 units, which was the first time that Triumph broke the 50,000 unit mark since the company’s rebirth in 1984. Helping Triumph reach this new high-water mark was the company’s home market, where Triumph accounted for one-in-five motorcycles sold in the UK (over 500cc). Overall, Triumph saw 8% growth in the UK, as modest growth considering the British market was up roughly 10% last year. The news is not all good, however. Triumph previously reported that financial figures for the first-half of 2014 were down, with revenue down £364 million from £369 million, and net income at a loss of £8 million.

Husqvarna 401 Concepts Will Be 2017 Production Models

One of the more intriguing things to come out of the 2014 EICMA motorcycle show in Milan were Husqvarna’s two “401” concepts, the Vitpilen and Svartpilen. The café-styled bikes are based off the KTM 390 Duke platform, though you wouldn’t know it from looking at them. Husqvarna said at EICMA that if there was sufficient interest, the Vitpilen and Svartpilen could go into production. With an overwhelming critical response from the press and fans, it should come no surprise then that our friends at Bike.se are reporting that Husqvarna intends to make the small-displacement machines a part of its 2017 model lineup.

Ducati Desmosedici Cucciolo Concept by Alex Garoli

Imagine if you will that the first Ducati, the Ducati Cucciolo, and the most modern Ducati, the Ducati Desmosedici, had a child — what would it look like? That far-fetched question nagged Mexican designer Alex Garoli, so he decided to build a concept of the machine. At the core of the Ducati Desmosedici Cucciolo is the V4 powerplant of Italy’s MotoGP race bike, and around it Garoli has imagined a modern steel trellis frame that mimics the bicycle frame look of the post-WWII motorized bicycles that pulled Italy out of deep recession. Of course the most interesting thing about Garoli’s concept is the fact that it’s a ~12:1 scale model. The work is pretty exquisite, even if you don’t agree with the concept’s ethos.

Confederate X132 Hellcat Speedster – By Pierre Terblanche

08/15/2014 @ 5:37 pm, by Jensen Beeler25 COMMENTS

Confederate-X132-Hellcat-Speedster-01

The Confederate X132 Hellcat Speedster is the newest motorcycle from the venerable “Southern” brand, and that’s enough of a pedigree for the machine to grace the pages of Asphalt & Rubber, but this latest incarnation of the Hellcat line also happens to be the first work by a certain Pierre Terblanche, who became Head of Design at Confederate not too long ago.

Based around the same 132 cubic inch (2,163cc) v-twin engine as the previous Hellcat models, the Speedster is good for 121hp and 140 lbs•ft of torque. The styling is true to the Confederate canon, though Terblanche’s touches can certainly be seen in the details of the machine.

Confederate X132 Hellcat Hits 172.211 MPH at Bonneville

09/26/2012 @ 5:26 pm, by Jensen Beeler9 COMMENTS

It is fall, which means it is also land speed record season up at Bonneville. While our own plans for salt flat were thwarted by some empty promises from an OEM, it seems plenty of teams and manufacturers made it up to Bonneville to test their mettle against the stopwatch.

One such company was Confederate Motorcycles, which took its recently debuted Confederate X132 Hellcat Combat up to the BUB Speed Trials in August, and subsequently set a 171.211 mph land speed record in the A-PF 3000 class (special construction chassis (unfaired), push-rod motor, fuel, & up to 3,000cc in cylinder displacement).

Racing his own bike on the salt flats, we are having a hard time imagining how Confederate customer James Hoegh managed to hold onto his unfaired machine at 171+ mph — it must be all about the tuck. Check the video out after the jump, and if you are anything like us, keep on dreaming about your day racing at the Bonneville.

More Photos of the Confederate X132 Hellcat

05/15/2012 @ 2:25 pm, by Jensen Beeler28 COMMENTS

The Confederate X132 Hellcat is the latest creation from the boutique southern motorcycle brand, and continues the Hellcat lineage’s custom-roadster aesthetic. Like any machine produced by Confederate, the real beauty of the new Hellcat comes down to the bike’s detail finishes, which for the X132 includes a motor casing that was built out of two pieces of billet 6061 aircraft grade aluminum.

Officially spec’d with “sufficient” power and torque figures, the  2,163cc v-twin motor on the X132 is more than eye-catching, and should propel you down the road just fine with its estimated 132 peak horsepower and 150 lbs•ft of torque.

With Confederate only expected to make 162 units of the X132 Hellcat, as usual the name of the game is exclusivity. Pricing has jumped from the initial $44,550, and now is $49,500, with another price increase of roughly $5,000 expected after July 4th. Fifteen more photos of the Confederate X132 Hellcat are after the jump for your viewing pleasure.

Confederate X132 Hellcat Breaks Cover

12/02/2011 @ 12:06 pm, by Jensen Beeler33 COMMENTS

It has been almost a year and a half since we first heard of the third generation Confederate X132 Hellcat, and today we get word that the “more affordable” Confederate has been finalized and is ready for pre-production orders. Borrowing on the namesake of its predecessors, the new Hellcat shares some of the basic characteristics of the original Hellcats, while still bringing a very unique look and style to the custom cruiser.

Set to begin production in January, Confederate is taking orders now with a price tag of $45,000 through February, though that price will go to $49,500 in March of 2012. With only 164 Confederate X132 Hellcats to be made, the Alabama-based company expects to make only two units a week.