Officially Official: MV Agusta Brutale Dragster 800 RR

We already brought you the first high-resolution photos of the MV Agusta Brutale Dragster 800 RR (say that three times fast!) yesterday, which were sent to us by our Bothan Spies. In response, MV Agusta has unveiled the Dragster RR and Brutale RR today, ahead of the EICMA show. Like the updated Brutale 800 RR, the Brutale Dragster 800 RR features a revised 798cc three-cylinder engine, which makes 140hp at the 13,100 rpm, and a very peaky 63 lbs•ft of torque at 10,100 rpm. Numerous visual cues have been changed, included red-anodized fork tubes, red-painted cylinder heads, and aluminum tubeless wire-spoked wheels. An eight-way adjustable steering damper continues the noticeable changes, to the 370 lbs machine (dry).

MV Agusta Brutale 800 RR — 140hp & MVICS 2.0

Along with the new Dragster RR, MV Agusta has debuted the Brutale RR, ahead of the EICMA show. Like its hot rod cousin, the MV Agusta Brutale 800 RR gets a 15hp increase, which makes for 140hp at the 13,100 rpm peak. A very peaky motor indeed, maximum torque arrives at 10,100 rpm at 63 lbs•ft. The Brutale RR also features the MVICS 2.0 electronics package, which first debuted on the still unreleased MV Agusta Turismo Veloce. An update to the already robust MVICS package, the key feature in the 2.0 revision is the quickshift operation, both for upshifts and downshifts. Equipped with EAS 2.0 and ABS as standard, we see the Brutale 800 RR priced at a modest €13,980 for the European market, while the similarly equipped MV Agusta Brutale 800 EAS ABS has a €2,300 price advantage, at €11,680 MSRP.

Ducati Scrambler Will Be “Made in Thailand”

Almost four years ago, we reported on Ducati opening a new assembly plant in Thailand. The move, which peeved Ducati’s factory workers, would see bikes destined for the Southeast Asian market assembled in the Thai plant, thus side-stepping many of the region’s aggressive tariffs on motorcycles. Nearing the end of 2014 now, and our Bothan Spies report that the Ducati Scrambler models will be the first motorcycles assembled in Ducati’s Thai plant that will then be shipped to the world market — a move that comes right after Ducati reached a new contract with its workers and unions, which sees the factory employees working fewer hours at higher wages.

Up-Close with the Yamaha YZF-R3

This week we not only go a chance to see the 2015 Yamaha YZF-R3 unveiled at the AIMExpo, but also we had the chance to see the R3 up-close in the flesh. The budget-minded sport bike shows the obvious signs of more cost-effecient construction and fitted components, yet retains the fit-and-finish you would expect from a Yamaha motorcycle. This makes the R3 a prime candidate for aspirational riders, who want an affordable first motorcycle that looks the part of a proper sport bike. Track enthusiasts and veteran riders though will be disappointed with the Yamaha YZF-R3’s non-adjustable KYB suspension, box swingarm design, and bulky chassis — this is still a 368lbs (wet) motorcycle.

Even More Photos of the 2015 Yamaha FJ-09 Leak

Yesterday we brought you the first official photo of the Yamaha FJ-09 tourer, which had been accidentally added to the Yamaha FZ-09 gallery on the Yamaha NA press site. Today it seems that leaks in Yamaha continue for the FJ-09, as our Dutch friends at Nieuwsmotor have discovered a bevy of press images, ahead of the 2015 Yamaha FJ-09’s debut at EICMA next month. Based around the FZ-09/MT-09 platform, the FJ-09 uses a similar three-cylinder engine as the sport nakeds, though looks to have more suspension travel and other touring elements. Picking up where the Yamaha TDM left off as a middleweight sport/adventure-tourer, the Yamaha FJ-09 could be a very interesting addition to Yamaha’s lineup.

Up-Close with the Kawasaki Ninja H2R

Asphalt & Rubber was on-hand for the AIMExpo in Orlando, covering the new bikes that are debuting on North American soil. We’ve already seen the new Yamaha YZF-R3 released here, as well as the Alta RedShift electric motorcycles (formerly BRD Motorcycles). While both bikes are impressive, and are massively important to the American motorcycle scene, the buzz remains about the Kawasaki Ninja H2R. The AIMExpo is the first venue for Americans to get a glimpse of Kawasaki’s hyperbike, and the H2R sits like a praying mantis, waiting to strike you with its supercharged charms. Naturally, we had to get a closer look…and bring you a bevy of high-resolution detail shots from the trades how floor. Enjoy!

2015 Yamaha FJ-09 Leaked ahead of EICMA

Someone at Yamaha is going to get a stern talking to today, as it seems a photo of the still unreleased Yamaha FJ-09 made its way to Yamaha’s press site accidentally, and didn’t yank it down before our friends at Common Tread caught a glimpse of it. Mixed in with photos of the Yamaha FZ-09, the photo of the 2015 Yamaha FJ-09 doesn’t really give too much away from the machine, as we’ve seen the same shot in black & white already. However, since it’s the new bike season, and Yamaha has already shown the YZF-R3 and teased the all-new YZF-R1, we thought it would be appropriate to show you this new model in all its glory. Based off the FZ-09 platform, the FJ-09 will be Yamaha’s budget-minded sport/ADV-touring machine, picking up were the old Yamaha TDM left off.

Ducati 1299 Will Have “Tiptronic-Like” Shifting

If there is a common thread for Ducati’s upcoming EICMA reveal, it is the influence and benefits of owner Audi AG. We have already seen the German car manufacturer’s variable valve timing technology find its way into the Testastretta engine, in the form of Desmodromic Variable Timing (DVT). Our sources say that the all-new Ducati Multistrada, which will debut in just a few weeks’ time, will be the first model equipped with DVT. While Ducati ups its ante in the ADV market, our Bothan spies have tipped us off to another piece of Audi tech that will find its way onto a Ducati motorcycle, as the 1299 will received a “Tiptronic-like” gearbox that allows for touch-button upshifts and downshifts.

Yamaha YZF-R3 Revealed – 321cc Twin Coming to the USA

The rumors were true, Yamaha is bringing a special small-displacement model to market, the Yamaha YZF-R3. As the name indicates, the new R3 gets a fuel-injected displacement bump over the R25, to the tune of 321cc. Debuted at the AIMExpo today, the Yamaha YZF-R3 is coming to the USA, with a price tag of $4,990. Said by Yamaha to have “class-leading power”, the new R3 finally adds a small-displacement sport bike to Yamaha’s North American lineup, and makes an attractive offering when compared to the other 250cc/300cc machines from the other Japanese manufacturers. Expect to see it in Yamaha dealers, starting January 2014. Yamaha North America expects the YZF-R3 to be the volume leader for the company in the USA and Canada, and rightfully so.

Ducati Announces DVT — Desmodromic Variable Timing

As was teased, Ducati is unveiling its “DVT” technology today, which stands for Desmodromic Variable Timing, and to showcase that technology (borrowed from Volkswagen), Ducati has produced the first motorcycle engine with variable valve timing on both the intake and exhaust camshafts. Adapted to the now-called Ducati Testastretta DVT engine, which we reported will debut first on the new Ducati Multistrada for 2015, Ducati’s new v-twin powerplant can change the intake and exhaust timing independently, and throughout the rev range. This means that the Ducati Testastretta DVT engine can be optimized for peak power at high rpms, while maintaing rideability and smoothness at lower rpms — not to mention keeping with emission and noise regulations throughout the rev range.

GP Commission Confirms Dropping of MotoGP Claiming Rule, Reduces Cost of Moto2 Engine Swaps

07/02/2013 @ 2:31 pm, by David Emmett6 COMMENTS

GP Commission Confirms Dropping of MotoGP Claiming Rule, Reduces Cost of Moto2 Engine Swaps CRT Magneti Marelli MotoGP Jensen Beeler 635x421

As we reported at Mugello, the claiming rule is to be dropped from the MotoGP rulebook. Introduced to prevent factories entering MotoGP under the guise of private teams, the claiming rule allowed any factory to claim the engine of a bike entered by a CRT team.

But after the Grand Prix Commission agreed to the introduction of a spec-ECU, the decision to run the spec-software proved to be an alternative and more effective way of separating full-factory efforts from privateer teams. The claiming rule was never actually used, the factories having said when the claiming rule was introduced that they had no intention of ever claiming an engine.

It was kept there as the ultimate threat, Teddy Roosevelt’s ‘big stick’ to prevent other factories from even considering such a ruse.

The new distinction between factory and private teams is now the spec-ECU, and so the claiming rule has been dropped with immediate effect for all teams (Forward Racing, Avintia Blusens, PBM’s Michael Laverty, CAME Ioda Racing) currently using the spec-software.

From 2014, all teams will have to use the spec-hardware, and so the claiming rule will be dropped completely for the 2014 season.

Aspar Racing’s Aprilia-Designed CRT MotoGP Bike

03/21/2012 @ 3:59 pm, by Jensen Beeler15 COMMENTS

Aspar Racings Aprilia Designed CRT MotoGP Bike Power Electronics Aspar Aprilia ART MotoGP CRT 07 635x423

One of the biggest compliments ever made regarding the Aprilia RSV4 was actual meant to be a criticism, as when it came time to homologate the RSV4 for World Superbike racing, the competition cried afoul — saying the RSV4 Factory was really a MotoGP bike in a production bike’s clothing. Said to be the leftovers from Aprilia’s aborted MotoGP effort, the Aprilia RSV4 had a meteoric rise in WSBK, and won the Championship after only the company’s second season back in the series.

It should come then with little surprise that the Aprilia and its V4 motor has been the popular choice for teams in the MotoGP Championship looking for a claiming-rule team (CRT) solution. Dubbed the ART, the Aprilia-powered CRT bike also features an aluminum chassis that is designed by the Italian company. Thus with Aprilia offering essentially a turn-key GP solution for teams like Aspar Racing, it probably shouldn’t shock us that the similarities between the production WSBK-spec RSV4 and prototype ART being almost too close to distinguish between the two, even down to the bodywork.

Given the fact that Dorna desperately needs an alternative to prototype racing machines built by Ducati, Honda, and Yamaha for its CRT gamble to work — not to mention the need for CRT bikes and teams that are competitive on the track with the bikes from the OEMs — one can only imagine that Dorna is turning a blind eye to obvious “bending of the rules” that is occurring with the ART project. If the ends justify the means, then surely none of this matters to Ezpeleta et al, and right now Randy de Puniet and the Aspar Racing team’s CRT effort are the MotoGP rights holder’s best bet at recapturing control of MotoGP racing.

That all being said, the Power Electronics Aspar team debuted its ART race bike, and as is the custom, disclosed only some of the most basic technical specifications about the machine. At the helm of Aspar’s ARTs will be Randy de Puniet and Aleix Espargaro, and while the CRTs as a whole have been off the pace of the prototype bikes, RdP’s pace on the Aprilia has been noticeably quicker, and could give some of the slower satellite riders a run for their money. Technical details and photos are after the jump.

Yamaha Boss Lin Jarvis Previews the 2012 MotoGP Season

02/01/2012 @ 10:56 am, by Jensen Beeler6 COMMENTS

Yamaha Boss Lin Jarvis Previews the 2012 MotoGP Season Lin Jarvis 635x422

If you want to get a quick feel of how the 2012 MotoGP Championship is shaping up from a very knowledgeable person in the MotoGP paddock, then today’s video from Yamaha Racing’s Lin Jarvis is your best bet. Taking some time from his duties of running Yamaha’s MotoGP team, Jarvis talks about the tests underway in Sepang, Malaysia, and is generally optimistic about the season.

Of course sometimes what isn’t said is more important than what is said, and in this season preview you won’t hear a single word about the most important change to MotoGP: the claiming rule teams. Simple omission, or are the OEMs beginning their face-off with Dorna on the future of MotoGP?

Photo of the Week: Proper Positioning

04/11/2011 @ 10:10 am, by Scott Jones7 COMMENTS

Photo of the Week: Proper Positioning Alex de Angelis Sachsenring MotoGP San Carlo Honda 635x422

The real question about the 2012 MotoGP season may be this: will the switch back to liter engines, and the rules that accompany that change, mean that non-factory teams can compete for the championship? Consider Alex de Angelis, shown here at the Sachsenring in 2009, hanging off his satellite Honda in typical style, and the fact that he was 2nd in the 2003 125cc championship, and third in 2006 and 2007 as a 250cc rider, but only had one podium in two years in the premier class.

Since the switch from 2-stroke 500s non-factory teams have not had much of a chance at taking the title, and for a rider on a satellite team the only realistic goal has been to be the Best of the Rest. We will almost certainly see a larger grid in 2012, but will the advantages the Claiming Rule Teams have (more fuel per race, more engines per season) mean they will be in a more competitive position?

I hope that riders such as De Angelis will find themselves competing for more than a few points each round, and will have a greater chance to show they belong in MotoGP before being demoted to another class or series.