Report: Honda RC213V-S Priced at ¥20 Million

According to a report made by The Asahi Shimbun, Japan’s second largest daily newspaper, Honda has green-lit the RC213V-S project, with a price tag of 20 million yen — roughly $170,000 USD. The Honda RC213V-S debuted at the 2014 EICMA show, and was as advertised: a MotoGP race bike with lights and mirrors added to it. Honda teased show-goers and the media by say that the RC213V-S model was only a prototype, adding more fuel to the speculation regarding whether the Japanese firm would actually produce the long-awaited model. Since its inception, price figures have been rumored and banded about, almost all of which were in the six-figure category.

Polaris Acquires Electric Motorcycle Business from Brammo

Polaris Industries has acquired the electric motorcycle business from Brammo, Inc. Polaris is also acting as a leading investor in the recapitalization of Brammo, which will enable Brammo to focus exclusively on the design, development, and integration of electric vehicle powertrains. This means that Polaris will takeover building electric motorcycles at its Spirit Lake, IA production facility, and that Brammo will continue developing EV powertrains for Polaris and other OEM partners. According to its press release, Polaris will start production of electric motorcycles in the second half of 2015.

Ducati Sets Sales Record for 2014 – 45,100 Bikes Sold

Ducati Motor Holding is reporting another record sales year, and that the Italian motorcycle manufacturer sold 45,100 bikes in 2014. This marks the fifth year in a row that Ducati has shown sales growth, and it’s the third year in a row that the sales figures have been an all-time record for the Italian brand. Sales for 2014 were up 2% over 2013, with the USA again leading as Ducati’s most important market (8,804 units sold in the USA). Unsurprisingly, the Asian market is growing quickly for Ducati as well, up 11% in 2014. Ducati attributes its sales growth in-part to its new water cooler Monster line, where the Ducati Monster 1200 and Ducati Monster 821 helped raise Monster sales by 31%, with 16,409 new bikes sold in 2014.

Newspeak: The Advent of the “Adventure-Sport”

In the past decade the ADV segment has been a confusing amalgamation of differing interests, and over that time-period, two distinct groups have boiled to the surface. First there are the “Long Way Round” hopefuls, who invariably own a BMW R1200GS/A, and seem to be on some sort of perpetual preparation for an African safari. More recently, a second group has appeared: those riders who look to these big ADV bikes as more versatile Sport-Touring machines. All these riders, and their bikes, have been wedged into a single “Adventure” category, and it has created a bit of confusion for the segment. So, I want to introduce the concept of the “Adventure-Sport” and how it differentiates from the previous “Adventure-Touring” category.

MotoGP: Ducati’s Desmosedici GP15 Officially Delayed

As had been widely expected, Ducati will not have the GP15 ready for the first test at Sepang, in early February. In an interview with the MotoGP.com website, due to be shown on 19th January, Ducati Corse boss confirmed that work was still underway on the all-new bike; and that instead, Ducati will be bringing an uprated version of last year’s bike, dubbed the GP14.3, to test aspects of the new design not requiring the new engine. The delays have been trailed by both Dall’Igna and Paolo Ciabatti, speaking to the media at the Valencia test and at the Superprestigio dirt track event in December. The GP15 is a completely new bike, designed from the ground up, with a completely redesigned engine.

1972 Honda CB500, 3D Printed to Life Size

We’ve talked a bit before about the virtues of 3D printing, and how this increasingly affordable technology could change the consumer landscape as far as how we buy basic parts in the motorcycle industry. For as practical as how 3D printing, or rapid prototyping, can be, it can also be beautiful and used for art. This story is sort of a merger of those two ideas. Jonathan Brand has hoped to buy a 1972 Honda CB500 motorcycle, but the birth of his son changed that plan. Where there is a will though, there is a way, and Brand came up with the next best thing — he built a life-size model of a CB500 with his 3D printer.

Mercedes CEO: No Further Acquisition of MV Agusta

Italians are rejoicing over the news that Mercedes-Benz CEO Dieter Zetsche has made it clear that the German car manufacturer is not interested in acquiring more of MV Agusta’s private stock. Loyal readers will remember that Mercedes-AMG purchased 25% of MV Agusta last October, for a rumored €30 million — echoing the move Audi made in Ducati. Talking at the North American International Auto Show in Detroit though, Zetsche said “however, to avoid what happened with Ducati we point out that we have no intention to take over the business or produce motorcycles. MV Agusta can do it better than us.”

Triumph Has Its Best Sales Year Since Its Rebirth

Good news for Triumph Motorcycles fans, as the British motorcycle marque is reporting a banner year for 2014 — with 54,432 units sold worldwide. That figure is up 4% over 2013’s sales figure of 52,089 units, which was the first time that Triumph broke the 50,000 unit mark since the company’s rebirth in 1984. Helping Triumph reach this new high-water mark was the company’s home market, where Triumph accounted for one-in-five motorcycles sold in the UK (over 500cc). Overall, Triumph saw 8% growth in the UK, as modest growth considering the British market was up roughly 10% last year. The news is not all good, however. Triumph previously reported that financial figures for the first-half of 2014 were down, with revenue down £364 million from £369 million, and net income at a loss of £8 million.

Husqvarna 401 Concepts Will Be 2017 Production Models

One of the more intriguing things to come out of the 2014 EICMA motorcycle show in Milan were Husqvarna’s two “401” concepts, the Vitpilen and Svartpilen. The café-styled bikes are based off the KTM 390 Duke platform, though you wouldn’t know it from looking at them. Husqvarna said at EICMA that if there was sufficient interest, the Vitpilen and Svartpilen could go into production. With an overwhelming critical response from the press and fans, it should come no surprise then that our friends at Bike.se are reporting that Husqvarna intends to make the small-displacement machines a part of its 2017 model lineup.

Ducati Desmosedici Cucciolo Concept by Alex Garoli

Imagine if you will that the first Ducati, the Ducati Cucciolo, and the most modern Ducati, the Ducati Desmosedici, had a child — what would it look like? That far-fetched question nagged Mexican designer Alex Garoli, so he decided to build a concept of the machine. At the core of the Ducati Desmosedici Cucciolo is the V4 powerplant of Italy’s MotoGP race bike, and around it Garoli has imagined a modern steel trellis frame that mimics the bicycle frame look of the post-WWII motorized bicycles that pulled Italy out of deep recession. Of course the most interesting thing about Garoli’s concept is the fact that it’s a ~12:1 scale model. The work is pretty exquisite, even if you don’t agree with the concept’s ethos.

Facelift Coming for the 2015 BMW S1000RR

08/25/2014 @ 11:03 pm, by Jensen Beeler24 COMMENTS

2015-bmw-s1000rr-render

As we already reported, the BMW S1000RR is set to get some updates for the 2015 model year…we even have a spy photo to prove it. We didn’t get too good of a look at the front of the new S1000RR earlier though, but thankfully our Dutch friends at Oliepeil have found a rendering of the 2015 BMW S1000RR.

Fans hoping that the BMW S1000RR would lose its winking face, will be disappointed, though the effect has certainly become less pronounced in the newest iteration. Since the render matches the bodywork we saw in our spy photos, which see different subtly venting outlet shapes being used, we can be extremely confident is the final design.

2013 Honda CBR600RR – Botox for an Aging Supersport

11/12/2012 @ 3:41 am, by Jensen Beeler16 COMMENTS

It is hard to believe that the Honda CBR600RR will turn five-years-old in 2013, but the Japanese supersport has long been neglected in the Honda line-up. Actually, the phonomenon has not been limited to the 600cc sport bike, as the Honda CBR1000RR has also been left to whither in the sun for far too long. With the 1,000cc superbike getting a makeover for 2012, it looks like the CBR600RR is finally getting its turn, as well.

As such, the 2013 Honda CBR600RR gets a set of new fairings, which we must admit are rather fetching (the bodywork is good for a 6% reduction in drag, according to Honda). The Japanese company also says that the revised front section improves RAM-air, and thus midrange torque. We won’t being to tell you what’s wrong with that statement, but suffice to say the design helps the 599cc motor breath better.

Other changes include a revised ECU package, 12-spoke wheels, Big Piston forks (BPF), and re-tuned rear shock. Honda is even throwing its “Electronic Combined Anti-Lock Braking System” (C-ABS) on the 2013 CBR600RR. Wowzers. Colors are Red, Repsol Edition, & White/Blue/Red. Pricing hasn’t been released yet, which surely means a price increase is headed the Honda CBR600RR’s way.

Spotted: 2013 Triumph Daytona 675

10/19/2012 @ 10:39 am, by Jensen Beeler14 COMMENTS

Expected only to get a modest makeover for the new model year, we now have proof that the 2013 Triumph Daytona 675 will bring us mostly only cosmetic upgrades in its new revision. Featuring a frame and updated bodywork, perhaps the most noticeable change to the Triumph Daytona 675 is the absence of an undertail exhaust on the three-cylinder supersport, which has been replaced with a GP-style side exhaust can and routing.

Anticipated to be receiving the same update as we saw with the 2013 Triumph Street Triple, the Daytona 675’s motor has likely been untouched, while the new frame and subframe assemblies benefit from a weight reduction (13 lbs on the Street Triple), and improved handling characteristics. We can likely expect similar gains on the 2013 Triumph Daytona 675, with the GP-style exhaust helping Triumph get past stricter European emissions standards.

Expect to see the official unveiling of the 2013 Triumph Daytona 675 at the EICMA show on November 12th. Two more photos are after the jump.

Leaked: 2012 Zero Motorcycles Model Range Is Set to Debut Brammo Empulse Killer

11/06/2011 @ 12:53 pm, by Jensen Beeler33 COMMENTS

Our first proper leak ahead of the upcoming EICMA show in Milan is now officially in the bag, as Asphalt & Rubber has gotten word on Zero Motorcycles’ 2012 electric motorcycles. Completely revamping its model range, our sources tell us that the 2012 Zero Motorcycles will have all-new motors, battery packs, and bodywork. Talking in numbers, the battery pack options will be 6kWh & 9kWh, with prices expected to be $11,000 and $13,000 respectively. Perhaps the most compelling news (and there’s plenty to be compelled about with this news) is that Zero Motorcycles plans to have the new models under production in December, and on dealer floors by January.