Report: Honda RC213V-S Priced at ¥20 Million

According to a report made by The Asahi Shimbun, Japan’s second largest daily newspaper, Honda has green-lit the RC213V-S project, with a price tag of 20 million yen — roughly $170,000 USD. The Honda RC213V-S debuted at the 2014 EICMA show, and was as advertised: a MotoGP race bike with lights and mirrors added to it. Honda teased show-goers and the media by say that the RC213V-S model was only a prototype, adding more fuel to the speculation regarding whether the Japanese firm would actually produce the long-awaited model. Since its inception, price figures have been rumored and banded about, almost all of which were in the six-figure category.

Polaris Acquires Electric Motorcycle Business from Brammo

Polaris Industries has acquired the electric motorcycle business from Brammo, Inc. Polaris is also acting as a leading investor in the recapitalization of Brammo, which will enable Brammo to focus exclusively on the design, development, and integration of electric vehicle powertrains. This means that Polaris will takeover building electric motorcycles at its Spirit Lake, IA production facility, and that Brammo will continue developing EV powertrains for Polaris and other OEM partners. According to its press release, Polaris will start production of electric motorcycles in the second half of 2015.

Ducati Sets Sales Record for 2014 – 45,100 Bikes Sold

Ducati Motor Holding is reporting another record sales year, and that the Italian motorcycle manufacturer sold 45,100 bikes in 2014. This marks the fifth year in a row that Ducati has shown sales growth, and it’s the third year in a row that the sales figures have been an all-time record for the Italian brand. Sales for 2014 were up 2% over 2013, with the USA again leading as Ducati’s most important market (8,804 units sold in the USA). Unsurprisingly, the Asian market is growing quickly for Ducati as well, up 11% in 2014. Ducati attributes its sales growth in-part to its new water cooler Monster line, where the Ducati Monster 1200 and Ducati Monster 821 helped raise Monster sales by 31%, with 16,409 new bikes sold in 2014.

Newspeak: The Advent of the “Adventure-Sport”

In the past decade the ADV segment has been a confusing amalgamation of differing interests, and over that time-period, two distinct groups have boiled to the surface. First there are the “Long Way Round” hopefuls, who invariably own a BMW R1200GS/A, and seem to be on some sort of perpetual preparation for an African safari. More recently, a second group has appeared: those riders who look to these big ADV bikes as more versatile Sport-Touring machines. All these riders, and their bikes, have been wedged into a single “Adventure” category, and it has created a bit of confusion for the segment. So, I want to introduce the concept of the “Adventure-Sport” and how it differentiates from the previous “Adventure-Touring” category.

MotoGP: Ducati’s Desmosedici GP15 Officially Delayed

As had been widely expected, Ducati will not have the GP15 ready for the first test at Sepang, in early February. In an interview with the MotoGP.com website, due to be shown on 19th January, Ducati Corse boss confirmed that work was still underway on the all-new bike; and that instead, Ducati will be bringing an uprated version of last year’s bike, dubbed the GP14.3, to test aspects of the new design not requiring the new engine. The delays have been trailed by both Dall’Igna and Paolo Ciabatti, speaking to the media at the Valencia test and at the Superprestigio dirt track event in December. The GP15 is a completely new bike, designed from the ground up, with a completely redesigned engine.

1972 Honda CB500, 3D Printed to Life Size

We’ve talked a bit before about the virtues of 3D printing, and how this increasingly affordable technology could change the consumer landscape as far as how we buy basic parts in the motorcycle industry. For as practical as how 3D printing, or rapid prototyping, can be, it can also be beautiful and used for art. This story is sort of a merger of those two ideas. Jonathan Brand has hoped to buy a 1972 Honda CB500 motorcycle, but the birth of his son changed that plan. Where there is a will though, there is a way, and Brand came up with the next best thing — he built a life-size model of a CB500 with his 3D printer.

Mercedes CEO: No Further Acquisition of MV Agusta

Italians are rejoicing over the news that Mercedes-Benz CEO Dieter Zetsche has made it clear that the German car manufacturer is not interested in acquiring more of MV Agusta’s private stock. Loyal readers will remember that Mercedes-AMG purchased 25% of MV Agusta last October, for a rumored €30 million — echoing the move Audi made in Ducati. Talking at the North American International Auto Show in Detroit though, Zetsche said “however, to avoid what happened with Ducati we point out that we have no intention to take over the business or produce motorcycles. MV Agusta can do it better than us.”

Triumph Has Its Best Sales Year Since Its Rebirth

Good news for Triumph Motorcycles fans, as the British motorcycle marque is reporting a banner year for 2014 — with 54,432 units sold worldwide. That figure is up 4% over 2013’s sales figure of 52,089 units, which was the first time that Triumph broke the 50,000 unit mark since the company’s rebirth in 1984. Helping Triumph reach this new high-water mark was the company’s home market, where Triumph accounted for one-in-five motorcycles sold in the UK (over 500cc). Overall, Triumph saw 8% growth in the UK, as modest growth considering the British market was up roughly 10% last year. The news is not all good, however. Triumph previously reported that financial figures for the first-half of 2014 were down, with revenue down £364 million from £369 million, and net income at a loss of £8 million.

Husqvarna 401 Concepts Will Be 2017 Production Models

One of the more intriguing things to come out of the 2014 EICMA motorcycle show in Milan were Husqvarna’s two “401” concepts, the Vitpilen and Svartpilen. The café-styled bikes are based off the KTM 390 Duke platform, though you wouldn’t know it from looking at them. Husqvarna said at EICMA that if there was sufficient interest, the Vitpilen and Svartpilen could go into production. With an overwhelming critical response from the press and fans, it should come no surprise then that our friends at Bike.se are reporting that Husqvarna intends to make the small-displacement machines a part of its 2017 model lineup.

Ducati Desmosedici Cucciolo Concept by Alex Garoli

Imagine if you will that the first Ducati, the Ducati Cucciolo, and the most modern Ducati, the Ducati Desmosedici, had a child — what would it look like? That far-fetched question nagged Mexican designer Alex Garoli, so he decided to build a concept of the machine. At the core of the Ducati Desmosedici Cucciolo is the V4 powerplant of Italy’s MotoGP race bike, and around it Garoli has imagined a modern steel trellis frame that mimics the bicycle frame look of the post-WWII motorized bicycles that pulled Italy out of deep recession. Of course the most interesting thing about Garoli’s concept is the fact that it’s a ~12:1 scale model. The work is pretty exquisite, even if you don’t agree with the concept’s ethos.

Kawasaki Ninja H2 / H2R Pricing Revealed

11/13/2014 @ 1:13 pm, by Jensen Beeler19 COMMENTS

2015-Kawasaki-Ninja-H2-53

Even though the Kawasaki Ninja H2R debuted in October at the INTERMOT show, and the Kawasaki Ninja H2 debuted a few weeks ago at the EICMA show, Kawasaki was a bit slow to release the pricing and availability details of its two supercharged machines. Releasing now details for the US market, we can quote pricing for the H2 and H2R throughout the world.

2013 Motus MST – 165hp, $30,975, Fall Production

03/16/2012 @ 11:07 am, by Jensen Beeler65 COMMENTS

Officially debuted last night to the masses of the Daytona Bike Week, the 2013 Motus MST broke cover in its production trim (the 2013 Motus MST-R is shown above), along with details about the bike’s final specs, pricing, and availability. As we reported earlier, the Motus MST will come without its originally planned gasoline direct injection (GDI), with the Motus team instead opting for direct port injection.

With the Motus MST priced at $30,975 and the Motus MST-R getting a price tag of $36,975, our earlier reports of a $30,000 price tag appear to be spot on as well. A “comfortable sportbike” as the American company is calling it, the Motus MST will initially be available at seven premium dealerships nationwide, though sadly none of them are west of the Rockies.

Honda Crossrunner UK Pricing Set at £9,075

03/23/2011 @ 8:28 am, by Jensen Beeler15 COMMENTS

Our friends across the pond are set to get the new Honda Crossrunner this summer, with pricing slated at £9,075 OTR. The VFR800 based V4 motor has been wedged into a new adventure bike chassis, finally giving the winged brand something to compete against the BMW GS, Ducati Multistrada 1200, KTM Adventure, Yamaha Super Ténéré, etc. Perhaps a little late to the party with the Crossrunner, we’ve heard relatively little chatter about the bike since its EICMA launch back in November. No word yet on American pricing or availability.

2011 KTM Street Bike Price List

02/16/2011 @ 3:33 pm, by Jensen Beeler10 COMMENTS

For 2011, KTM has added two new models to its street line-up: the 2011 KTM 1190 RC8 R Race Spec & 2011 KTM 990 Adventure Dakar. Helping celebrate 30 years of the Dakar Rally, the 990 Adventure Dakar comes with with the Adventure R’s peppier 115hp motor, and the base model Adventure’s 210mm suspension. The KTM 990 Adventure Dakar also comes with a selectable two-channel anti-lock brake system courtesy of the wicked smart minds at Bosch.

Other highlights in KTM’s 2011 street line is the massive price reduction on the KTM RC8R, which takes over the price point of the now discontinued RC8, making for one very affordable v-twin awesomebike. The 2011 KTM 990 SMT also gets some upgrades, most notably the same two-channel anti-lock brake system courtesy of Bosch. Full price list and availability breakdown after the jump.

2011 Pricing and Availability for Aprilia, Moto Guzzi, Vespa, & Piaggio Motorcycles and Scooters

12/28/2010 @ 12:56 pm, by Jensen Beeler5 COMMENTS

The North American distributor for the Piaggio Group (PGA) has released pricing and availability info for the company’s 2011 range of motorcycles and scooters for the Aprilia, Moto Guzzi, Vespa, and Piaggio brands. While most of the scooters are immediately available, many of the big bikes will come in the first half or middle of 2011. Noticeably absent from the pricing and availability sheet are the 2011 Aprilia Tuono V4 R & 2011 Aprilia RS4 125, but the 2011 Aprilia RSV4 Factory SE ($22,499 MSRP/mid-2011) is listed along with the base model RSV4 R ($15,000/mid-2011). Check after the jump for a full breakdown of prices and availability times.

Why Motorcycle Shops Don’t Sell Motorcycles

12/11/2008 @ 6:50 pm, by Jensen BeelerComments Off

J.D. Power and Associates has just released a report that details some of the major reasons why motorcycle buyers purchase one bike over another. After talking to over 3000 customers in September and October, the report outlines four major factors for purchasing desiions, namely: why a buyer bought from one brand rather than another. The short answer is: The Dealer, the long answer is after the jump.