The Ducati Panigale R and Its Carbon “Wheel Cover”

While everyone else seems to be turning a blind eye to aerodynamics, Ducati continues to be the brand pushing the aero envelope with its designs. As such, World Superbike fans may have seen this weekend that Chaz Davies was sporting a unique rear end, as Ducati Corse continues to experiment with a lenticular wheel setup. A piece of technology borrowed mostly from cycling, the carbon fiber disc “wheel cover” provides a more slippery surface for the wind to flow over, than the chaos that comes from a spinning spoked wheel on a motorcycle. Ducati has played with a lenticular wheel before, with Michele Pirro sporting the design in the recent MotoGP testing season.

Pirelli Responds to WorldSBK Tire Woes with Change

The Misano round of WorldSBK was dominated by talk of tires. As such, following a weekend fraught with failures, Pirelli will revert to an older specification of tire for the Laguna Seca round. The move sees Pirelli at a crossroads, after a series of high profile incidents during the scorching weekend in Italy. This includes Michael van der Mark’s crash from the lead of Saturday’s race, after a tire failure saw the Dutch rider robbed of his chance to claim his first podium for Yamaha. One has to remember too, Jonathan Rea also crashed out of the lead at the previous round in Donington Park, as it was a shock to see the previously robust Pirelli fail once again.

Oh My, The “Miracle Mike” Is One Tasty Indian Scout Build

That’s it. Hell must be freezing over, as I just had to mop up the floor after looking at photos of a cruiser. What you see here is called the “Miracle Mike” and it is the creation of the minds at Young Guns Speed Shop. The bike is built off the Indian Scout, an affordable entry-level cruiser that boasts pretty good performance for its $10,000 price tag, but is generally a pass for anyone that likes leaning more than 31°. Here at Asphalt & Rubber, we’ve had a bit of time on both the Scout and its sibling, the Victory Octane, and found the models to be potent, but in need of a better gearbox and front brakes…and a serious diet wouldn’t hurt too. The Swiss minds at Young Guns seemed to think the same, making smart improvements to the Indian Scout for their creation. And heck, a little nitrous “go juice” never hurts, right?

In Search of the Ultimate Motorcycle Paddock Stand…

Here is something interesting that popped up in my social media feed recently (see, online maketing does work!), which I thought was worthy of sharing with Asphalt & Rubber readers, as I am in search of the ultimate set of paddock stands for my fleet of motorcycles. Dynamoto is a new brand name in the age-old paddock stand business. It is rare to see new things in this space, but the folks at Dynamoto seem to have an interesting concept, as its a bike lift that can move freely around the garage with the bike still on it, using a novel dual-axis wheel design. If your garage is as choked full with motorcycles as mine is, being able to move a bike easily, especially on a service stand, is a valuable ability to have. Dynamoto seems to have this very need in its mind with its clever design, though their design does have its flaws.

2018 Yamaha YZ450F Debuts with Tuner App

Not one to let the other brands have all the fun, Yamaha has debuted its all new 450cc class motocross bike, the 2018 Yamaha YZ450F, which features the first engine tuning app available for a production MX bike. The new Yamaha YZ450F is truly an all-new machine, with a new engine, frame, and bodywork. For bonus points too, the new YZ450F comes with an electric starter, which means MX riders can now skip leg day at the gym, and still get their bikes running on race day. Available in July, in either “Team Yamaha Blue” or “White” color schemes, the 2018 Yamaha YZ450F will cost $9,199 MSRP. This price includes the onboard communication control unit (CCU), which allows the rider to connect to the bike via smartphone.

Pikes Peak Gets EMT Motorcycles from Ducati

The Pikes Peak International Hill Climb is rapidly approaching, and the iconic “Race to the Clouds” continues to mature, despite this year being its 95th running. Helping mitigate the safety issues that come with racing on the mountain’s 156 turns is Ducati North America, which already supports racer mentoring with the Squadra Alpina program. Now, Pikes Peak is taking another step forward. Again with the help of Ducati North America, the Pikes Peak International Hill Climb will have emergency first-responders on motorcycles. This is a page taken straight out of the Isle of Man TT, where traveling marshals move by sport bike between checkpoints, and are often the first medical personnel on the scene of a crash.

More Photos and Details of the MV Agusta RVS #1

Yesterday we showed you the MV Agusta RVS #1, the first creation from the Italian marque’s Reparto Veicoli Speciali program, which is making limited run machines out of MV Agusta models. Reparto Veicoli Speciali comes straight out of the Castiglioni Research Center, MV Agusta’s design studio, and this division will focus solely on making dedicated bikes for special customers. One bike, one customer, is the premise. The RVS #1 might bear familiar lines to the MV Agusta Brutale 800, but this machine is hand-built and features the most powerful three-cylinder engine in MV Agusta’s lineup, with 150 hp coming from the 350 lbs (and Euro IV compliant) machine.

The Updated 2018 Husqvarna FS 450 Supermoto Debuts

Husqvarna continues to be the only motorcycle manufacturer with a race-ready supermoto, straight from the factory, and what a machine it is, the Husqvarna FS 450. For the 2018 model year, the Swedish brand has added more updates for the Husqvarna FS 450, keeping it at the pointy end of technology. The big changes come in the form of a new slipper clutch from Suter, and brand that any MotoGP team should be familiar with, along with a new map switch control on the handlebar, which continues to toggle on and off the bike’s traction control, dual engine maps, and launch control features. The last change of note for the 2018 model year that Husqvarna wants us to share is that fact that there is a new graphics package…this year, the seat is blue.

MV Agusta Debuts Its First “RVS” Motorcycle Concept

The intrigue is finally over in regards to MV Agusta’s new “Reparto Veicoli Speciali” or “RVS” program, with the Italian marque debuting its first creation from this special vehicle development unit. An intersection between the designers and engineers at MV Agusta’s Castiglioni Research Centre, RVS is what happens when you let designers be free with their imaginations, and you let engineers create those ideas unfettered – at least, so says MV Agusta. The result for this fist iteration is a very unique looking MV Agusta Brutale 800, which has a bevy of custom pieces on it that make it look like a café racer / scrambler type of machine.

Honda Says It Will Introduce an Electric Scooter in 2018

Talking at the company’s annual press conference and meeting, Honda Motor Company President & CEO Takahiro Hachigo said that the Japanese brand would debut an electric scooter in 2018, presumably as a production model. Hachigo went on to say that Honda is working on creating what it calls a “highly convenient system for electric commuters” that includes detachable mobile batteries to facilitate quicker recharge times for electric vehicle users. Big Red is said to be considering a partnership with courier service Japan Post to demonstrate its swappable battery system. However, this news is not the first time that we have seen Honda exploring electric scooter systems for urban systems,, nor is it the first time that Honda has explored the technology for businesses.

Two Enthusiasts Podcast #36 – Tikka Masala

11/01/2016 @ 11:19 am, by Jensen Beeler4 COMMENTS

two-enthusiasts-podcast

Recapping the recent INTERMOT show, Episode 36 of the Two Enthusiasts Podcast covers the three big themes that emerged from Cologne: homologation specials, vintage motorcycles, and rider aids.

With these themes in mind, we have a good conversation about the three homologation specials we saw from the Japanese manufacturers at INTERMOT: the Honda CBR1000RR SP2, the Suzuki GSX-R1000R, and the Kawasaki Ninja ZX-10RR.

The conversation then turns to the neo-vintage models we saw in Germany, and how brands like Triumph and BMW are investing heavily in this trendy niche.

We finish up the show talking about motorcycle electronics, inertial measurement units (IMUs) to be specific. This game-changing technology continues to permeate through the motorcycle industry, along with other rider aids, so we have a good conversation about the rise of the IMU.

As always, you can listen to the show via the embedded SoundCloud player, after the jump, or you can find the show on iTunes (please leave a review) or this RSS feed. Be sure to follow us on Facebook and Twitter as well. Enjoy the show!

Continue Reading

Two Enthusiasts Podcast #35 – No Brainer

10/11/2016 @ 5:08 am, by Jensen Beeler21 COMMENTS

two-enthusiasts-podcast

Episode 35 of the Two Enthusiasts Podcast comes to us right after my trip to Los Angeles for the Arai Helmets press launch for the Quantum-X and Signet-X helmets. The show covers these new helmets, as well as what it’s like to ride the Piaggio MP3 500 – a three-wheeled leaning scooter. Spoiler alert, it’s pretty fun.

The conversation about helmets eventually evolves into a discussion about helmet design and construction, how the business side of this part of the industry works, and what the future holds for helmet designs.

There’s a fair bit of debunking going on in this part of the show, with helmets being a subject where conjecture and bad information exist in too large of quantity.

The show ends with a listener question from the folks at Rizoma, who was about air injection for emissions controls. This leads into a pretty lengthy conversation about how motorcycle control the gases they emit, and also how valve timing affects how motorcycle make power and handle emissions.

As always, you can listen to the show via the embedded SoundCloud player, after the jump, or you can find the show on iTunes (please leave a review) or this RSS feed. Be sure to follow us on Facebook and Twitter as well. Enjoy the show!

Continue Reading

Two Enthusiasts Podcast #34 – Doohickey

09/27/2016 @ 1:39 am, by Jensen Beeler24 COMMENTS

two-enthusiasts-podcast

Episode 34 of the Two Enthusiasts Podcast starts off by using the two new Ducati Scrambler models, which were spotted in CARB filings earlier this month, as a jumping off point to talk about how motorcycle manufacturers are chasing the post-authentic biker movement.

We then opine a bit about the apparent decline in the number of scrambler and café racer builds we are seeing in the custom motorcycle scene right now, and how we think that superbikes from the 1980s could be the next platform of choice for bike builders.

This takes the show into a discussion about the rise of electronics, and how they not only affect the motorcycle hobbyist, but also custom motorcycle builders. We then finish up the show with a listener question that asks about for selling advice on a heavily customized Japanese motorcycle.

There might be a revolving KLR joke in there as well…all in all, it’s another classic Two Enthusiasts Podcast show.

As always, you can listen to the show via the embedded SoundCloud player, after the jump, or you can find the show on iTunes (please leave a review) or this RSS feed. Be sure to follow us on Facebook and Twitter as well. Enjoy the show!

Continue Reading

Two Enthusiasts Podcast #33 – Wankeled

09/20/2016 @ 2:06 pm, by Jensen Beeler7 COMMENTS

two-enthusiasts-podcast

I’m not going to lie to you, Episode 33 of the Two Enthusiasts Podcast starts off a little rowdy, and never really stops partying. In it, we look at the recently spied 2017 Honda CBR1000RR and recently teased 2017 Yamaha YZF-R6, two incredibly important machines in the sport biking side of the industry.

We also talk about the Wazer water jet cutting project, and how that’s going to affect builders and makers. From there, we pivot to a discussion on the consumerization (that’s a word now) of high-tech manufacturing techniques, which has made things like water jet cutting and rapid prototyping accessible to the masses.

The show ends with a listener question about ABS brakes, which is good timing, considering our interesting discussion about electronics as a whole, and the progression of rider aids in the motorcycle industry. Wankel jokes aside, it is a pretty interesting, and dare we say entertaining show.

As always, you can listen to the show via the embedded SoundCloud player, after the jump, or you can find the show on iTunes (please leave a review) or this RSS feed. Be sure to follow us on Facebook and Twitter as well. Enjoy the show!

Continue Reading

Two Enthusiasts Podcast #32 – Kinda Corny

09/13/2016 @ 11:59 pm, by Jensen Beeler4 COMMENTS

two-enthusiasts-podcast

Summer is coming to an end in Two Enthusiasts Podcast land, and as such Episode 32 starts with some talk of the final track days of the season, before we head off into a discussion about the American Motorcyclist Association.

The prompt for this discussion is the recent kerfuffle over four-gallon minimum fill-ups from blended nozzles (if you don’t know what that means; don’t worry, we get you up to speed on it in the show), and the AMA’s response to this recent business recommendation from the corn lobby.

We examine this issue, and then turn to talk about the AMA as an organization, and whether it is representing the best interests of mainstream motorcyclists.

It’s a pretty interesting conversation, which quite frankly, every motorcycle-owner should examine for themselves, and decide where they fall in terms of how this industry should be lead in the coming years.

As always, you can listen to the show via the embedded SoundCloud player, after the jump, or you can find the show on iTunes (please leave a review) or this RSS feed. Be sure to follow us on Facebook and Twitter as well. Enjoy the show!

Continue Reading

Motorcycle Dealers Take Note – This Is How You Sell Fun

09/08/2016 @ 10:58 am, by Jensen Beeler26 COMMENTS

Dypree-Husqvarna-701-Supermoto

In writing this story, I probably tried on four or five different approaches to say that exact same thing: here is a video that makes me want to drop off a pile of cash at my local Husqvarna dealership, and brap off into the sunset with a new Husqvarna 701 Supermoto.

I had trouble articulating this thought though, not because I was at a loss of words for my inner-hooligan, but because what impressed me more was the fact that this high-octane video clip comes not from Husqvarna, but instead from one of the company’s Czech dealers: Dypree.

Continue Reading

Two Enthusiasts Podcast #31 – Oedipus Wrecked

09/06/2016 @ 8:48 am, by Jensen Beeler5 COMMENTS

two-enthusiasts-podcast

Another week, and so another episode of the Two Enthusiasts Podcast is up, for your listening pleasure. Episode 31 sees Quentin and myself with a new recording time, which is earlier in the week, so the show is less about current events, and more an exploration of topics, this time around.

As such, we share some stories from the track, focusing mostly on bike safety and track preparation. No topic is left uncovered, which means a healthy discussion about the time-honored topics of motorcycle oil and tires. Spoiler alert, Quentin has some interesting practices when it comes to motorcycle lubrication…

We finish the show with some listener questions, all of which we think you will find highly engaging, so give it play (or two).

As always, you can listen to the show via the embedded SoundCloud player, after the jump, or you can find the show on iTunes (please leave a review) or this RSS feed. Be sure to follow us on Facebook and Twitter as well. Enjoy the show!

Continue Reading

Two Enthusiasts Podcast #30 – The Need for Speed

08/30/2016 @ 5:27 pm, by Jensen Beeler3 COMMENTS

two-enthusiasts-podcast

Your weekly two-wheeled podcast addiction continues with Episode 30 of the Two Enthusiasts Podcast. This installment sees us discussing three different powertrains, the motorcycles that they power.

First up is Harley-Davidson’s new Milwaukee-Eight engine, which will power its Big Twin touring models for the 2017 model year. We then turn our attention to Ducati (no surprise there), and discuss the seeming return of the air-cooled Ducati Monster, which was spied last week.

We finish the show with a lengthy debrief on the Alta Motors Redshift MX, as Quentin and I had previously spent a day riding this electric dirt bike in the mountains near Portland, Oregon.

As always, you can listen to the show via the embedded SoundCloud player, after the jump, or you can find the show on iTunes (please leave a review) or this RSS feed. Be sure to follow us on Facebook and Twitter as well. Enjoy the show!

Continue Reading

Two Enthusiasts Podcast #29 – Motocyclisme

08/22/2016 @ 10:38 pm, by Jensen Beeler12 COMMENTS

two-enthusiasts-podcast

Your weekly two-wheeled podcast addiction continues with Episode 29 of the Two Enthusiasts Podcast. This installment sees Quentin and I discussing about the recent lawsuit against Skully, which alleges a number of pricey corporate perks, on the helmet startup’s company dime.

We also discuss some racing news: the sacking of Romano Fenati and the prospect of team communications with riders in MotoGP. We also discuss the settlement reached by the EPA and Harley-Davidson, over the use of engine tuning devices, and what that can mean for the industry as a whole.

Lastly, Quentin tells us a tale about getting back on an air-cooled Ducati, and camping in Eastern Oregon, while I give a glimpse into my review of the 2017 Yamaha SCR950, as I was in Julian, California riding the scrambler at the US press launch. It’s another great show for our Two Enthusiasts fans.

As always, you can listen to the show via the embedded SoundCloud player, after the jump, or you can find the show on iTunes (please leave a review) or this RSS feed. Be sure to follow us on Facebook and Twitter as well. Enjoy the show!

Continue Reading

Two Enthusiasts Podcast #28 – Getting Cranky

08/15/2016 @ 7:58 pm, by Jensen Beeler12 COMMENTS

two-enthusiasts-podcast

Episode 28 of the Two Enthusiasts Podcast starts with some recent news: the closure of Skully and the near-passage of California’s lane-splitting law.

The conversation about Skully quickly moves from the failed startup, to a broader conversation about helmet design and the progress of technology in this space. The show then turns to California’s lane-splitting law, and what it could mean for motorcyclists in states other than California.

Once the news items are out of the way, the show spends a bit of time talking about crankshaft design, namely what it means to have a “crossplane” crankshaft.

Further down the rabbit hole, this turns into a larger conversation about how engines make their power, and how that power is tuned for specific tasks. It’s a tough subject to do only via voice, but we think you’ll enjoy it.

As always, you can listen to the show via the embedded SoundCloud player, after the jump, or you can find the show on iTunes (please leave a review) or this RSS feed. Be sure to follow us on Facebook and Twitter as well. Enjoy the show!

Continue Reading