Tag

2017 Yamaha YZF-R6

Browsing

Episode 49 of the Two Enthusiasts Podcast is mostly about our chance to ride the 2017 Yamaha YZF-R6 at Thunderhill Raceway, though there are certainly enough rabbit holes of side-discussion that we suppose we can make note of a few other topics that we covered as well.

Obviously, the show includes a look at the supersport segment, as we talk about the latest 600cc four-cylinder machine to hit the motorcycle industry. We also talk about the Bridgestone R10 DOT race tire, as well as the Bridgestone W01 full-rain race tire, both of which we got to try at Thunderhill in mixed conditions.

In our talk about the “new” Yamaha YZF-R6, we got side-tracked by a number of interesting topics, like wet track riding and chassis setup/dynamics, as well as the problem of choice overload, as it pertains to the motorcycle industry. Another Two Enthusiasts classic, we hop you listen and enjoy the show.

You can listen to the show via the embedded SoundCloud player, after the jump, or you can find the show on iTunes (please leave a review) or this RSS feed. Be sure to follow us on Facebook and Twitter as well. Enjoy the show!

The 2017 Yamaha YZF-R6 is more than just “bold new plastics” as one A&R commenter said, with traction control, ABS, new suspension, and R1-esque bodywork being added to the supersport machine – among other changes.

Still very much “evolution” rather than “revolution” for the Japanese manufacturer, the Yamaha R6 however is a very striking machine, visually, and that’s what we wanted to share with you today.

Yamaha isn’t shy that the R6 gets its look from its older sibling, the YZF-R1, with both bikes sharing a number of visual elements: MotoGP-inspired air intake, koi fish headlights on the fairing, vented tail section, and sinister LED marker lights – just to name a few.

The effect though is perhaps the most dramatic change to the venerable supersport, as it takes the 12-year-old design for the YZF-R6 and gives it a modern look and feel.

Since 1999, Yamaha has sold over 153,000 YZF-R6 supersport motorcycles, and for the 2017 model year the Japanese manufacturer adds a new chapter to that 19-year history.

Big Blue calls the 2017 Yamaha YZF-R6 a fourth generation motorcycle, but for those paying attention, it is obvious that Yamaha has merely taken its class-leading 600cc sport bike, made some refinements to the machine, and added an electronics package to the mix.

While there is disappointment that Yamaha didn’t bring as revolutionary of a debut to the YZF-R6 as it did just recently with the YZF-R1 superbike, we should state quite clearly that the Japanese brand continues its dominance in the 600cc sport bike realm with this most-recent addition to its lineup.

We should also give full-marks to the the realization that for Yamaha’s competitors in the supersport category, it will be considerably harder going forward to compete with Yamaha’s 600cc offering – a task that has already been a tough feat.

Good morning from cloudy California. Today’s adventure takes us to one of my favorite race tracks, Thunderhill Raceway Park, to test the 2017 Yamaha YZF-R6.

It should be an interesting day, namely since Northern California is getting some much-needed rain, although that makes it tough to test a 120hp+ supersport machine.

On second thought though, maybe these are ideal conditions for the “new” R6 – with its freshly added traction control, riding modes, and anti-locking brake system.

It’s this electronics suite that will be the focus of our testing today, considering that the 2017 Yamaha YZF-R6 keeps the same frame and engine as its predecessor.

Definitely more evolution than revolution, other changes to the R6 for 2017 include revised suspension and braking components, magnesium subframe, aluminum tank, and bodywork that improves aerodynamics.

Yamaha calls this its “4th Generation” YZF-R6 model, though the spec list is suggesting something closer to a “3.5 Generation” machine…maybe 3.75, if I have had my Mountain Dew this morning and am feeling generous.

Yamaha feels confident that the 2017 model is a “new” bike though, and they even brought a 2016 model to ride, in order to prove the point to us. So, that will certainly be interesting. It looks like Bridgestone W01 full-wet rain tires will be the order of the day, and we’ll keep our fingers crossed that things don’t get too moist out there.

Per our new review format, we will be giving you a live assessment of the 2017 Yamaha YZF-R6 right here in this article (down in the comments section), and there we will try to answer any questions you might have. So, here is your chance to learn what it’s like to ride the 2017 Yamaha YZF-R6, before even my own proper review is posted.

As always, if I don’t know an answer, I will try to get a response from the Yamaha personnel (we have members from both the Japanese and American teams here on-site) that are here with me here at Thunderhill. So, pepper away.

You can follow our thoughts on the bike live via FacebookTwitter, and Instagram. You can also try searching for the hashtags: #Yamaha #RWorld #R6FirstRide for the thoughts of my colleagues as well.

Yamaha is gearing up to go racing in the FIM World Supersport Championship, finally bringing back once again a factory team to the 600cc class, and it plans to do so with the 2017 Yamaha YZF-R6.

At EIMCA today, Team Blue gave us our first glimpse of the bike that factory riders Lucas Mahias and Federico Caricasulo, and factory-supported riders Niki Tuuli and Sheridan Morais, will compete with next season in World Supersport.

World Supersport rules don’t allow much in the way of modification to the Yamaha YZF-R6, so while the bike you see here is still just a gussied-up production bike, the actually race bike that the teams will use will differ in only minute ways.

Changes made to the R6 shown here include a set of race fairings, an Akrapovi? Evo full titanium exhaust, 320mm Brembo T-drive front brake discs, 43mm forks with Öhlins cartridges, and Pirelli Diablo DOT race tires.

Loyal Asphalt & Rubber readers will know how much we like our high-resolution photos here at A&R, so we wanted to make sure you could get a good high-res look at the 2017 Yamaha YZF-R6 that debuted today at the AIMExpo in Orlando, Florida.

Yamaha has left its class-leading bike mostly unchanged for the next model year, when it comes to the R6 motor and chassis, which might disappoint some. But with the addition of R1-inspired styling, traction control, ABS brakes, and better suspension pieces, we think supersport fans will be pleased with this update.

With the bar now set higher in the 600cc realm, hopefully we will see other manufacturers take up the challenge, and the supersport class will have new life breathed into it.

We’ll have to wait and see on that. Until then, enjoy this modest photo gallery.

The wait is finally over, as the 2017 Yamaha YZF-R6 debuted today at the AIMExpo in Orlando, Florida. As expected, the new Yamaha R6 visually borrows from the recently updated R1, with a similar headlight and intake setup featuring now on both machines.

On the technical side of things, the 2017 Yamaha R6 is more evolution than revolution, with the basic chassis and engine configuration staying the same.

However, updates for 2017 include a revised suspension package, ABS brakes, riding modes via ride-by-wire, traction control, and an optional quickshifter.

The 2017 Yamaha YZF-R6 is coming soon. We know this because Yamaha has released a second teaser reminding us to that fact. Set this time at what looks like Miller Motorsports Park in Utah, the teaser video again is light on giving anything away.

A few glimpses of a sport bike can be seen, and of course there’s the aural pleasure of hearing a 600cc inline-four engine being revved out to infinity. Our ear hears a flatplane crank for the new Yamaha YZF-R6, which is a topic we’ve covered before, in the last teaser video.

If we sample the frames to this video, we do get a couple good detail shots. One is of the vents on the fuel tank / airbox cover, another shows us what looks like an LED headlight, the best shot though shows us the shilouette of the new R6, which looks to be based closely off the current R1.

Beyond this, what features could Yamaha be bringing to the class-leading supersport? Only time can tell.

I’m not going to lie to you, Episode 33 of the Two Enthusiasts Podcast starts off a little rowdy, and never really stops partying. In it, we look at the recently spied 2017 Honda CBR1000RR and recently teased 2017 Yamaha YZF-R6, two incredibly important machines in the sport biking side of the industry.

We also talk about the Wazer water jet cutting project, and how that’s going to affect builders and makers. From there, we pivot to a discussion on the consumerization (that’s a word now) of high-tech manufacturing techniques, which has made things like water jet cutting and rapid prototyping accessible to the masses.

The show ends with a listener question about ABS brakes, which is good timing, considering our interesting discussion about electronics as a whole, and the progression of rider aids in the motorcycle industry. Wankel jokes aside, it is a pretty interesting, and dare we say entertaining show.

As always, you can listen to the show via the embedded SoundCloud player, after the jump, or you can find the show on iTunes (please leave a review) or this RSS feed. Be sure to follow us on Facebook and Twitter as well. Enjoy the show!

For a couple months now, we’ve had some indications that Yamaha was getting ready to release a new sport bike. With the Yamaha YZF-R1 coming up on two-years-old, the timing suggested that Yamaha was ready for a follow-up to that hit. That is to say, it is time for a new Yamaha YZF-R6.

Yamaha seems to agree, today posting a teaser video to its website and social media accounts. The video is sanitized from giving away too much information, with us only seeing a rider going around a race track. The sound though, is a strong giveaway.

The video’s soundtrack is filled with the screaming of a multi-cylinder machine. Our ear hears a four-cylinder engine, with a flat-plane crankshaft, that is revving to the stratosphere.

This give us a strong indication that a supersport bike is just around the corner, and the video ends with the promise of showing more on October 4th, the first press day of the INTERMOT trade show in Cologne, Germany.

Someone is trying to pass off the above photo as the eagerly awaited 2017 Yamaha YZF-R6 – unfortunately, it’s a fake. I’m actually surprised this piece of photoshop has some legs, and is making its way around the internet, considering how obvious the forgery.

To verify its authenticity, all one would have to do is to compare the above photo with photos of the current generation Yamaha YZF-R1. Contrasting the two, it’s clear that the chassis and exposed parts of the engine are right off the Yamaha YZF-R1 (it’s easiest to see on the swingarm).

The real smoking gun though is that the forger used a Yamaha press photo as their base. I was able to find the base photo (after the jump), which clearly shows that the five-spoke wheels on the alleged R6 are in the exact same ones from a R1 press photo – even the holes on the front brake discs and rear sprocket line-up.