Report: Honda RC213V-S Priced at ¥20 Million

According to a report made by The Asahi Shimbun, Japan’s second largest daily newspaper, Honda has green-lit the RC213V-S project, with a price tag of 20 million yen — roughly $170,000 USD. The Honda RC213V-S debuted at the 2014 EICMA show, and was as advertised: a MotoGP race bike with lights and mirrors added to it. Honda teased show-goers and the media by say that the RC213V-S model was only a prototype, adding more fuel to the speculation regarding whether the Japanese firm would actually produce the long-awaited model. Since its inception, price figures have been rumored and banded about, almost all of which were in the six-figure category.

Polaris Acquires Electric Motorcycle Business from Brammo

Polaris Industries has acquired the electric motorcycle business from Brammo, Inc. Polaris is also acting as a leading investor in the recapitalization of Brammo, which will enable Brammo to focus exclusively on the design, development, and integration of electric vehicle powertrains. This means that Polaris will takeover building electric motorcycles at its Spirit Lake, IA production facility, and that Brammo will continue developing EV powertrains for Polaris and other OEM partners. According to its press release, Polaris will start production of electric motorcycles in the second half of 2015.

Ducati Sets Sales Record for 2014 – 45,100 Bikes Sold

Ducati Motor Holding is reporting another record sales year, and that the Italian motorcycle manufacturer sold 45,100 bikes in 2014. This marks the fifth year in a row that Ducati has shown sales growth, and it’s the third year in a row that the sales figures have been an all-time record for the Italian brand. Sales for 2014 were up 2% over 2013, with the USA again leading as Ducati’s most important market (8,804 units sold in the USA). Unsurprisingly, the Asian market is growing quickly for Ducati as well, up 11% in 2014. Ducati attributes its sales growth in-part to its new water cooler Monster line, where the Ducati Monster 1200 and Ducati Monster 821 helped raise Monster sales by 31%, with 16,409 new bikes sold in 2014.

Newspeak: The Advent of the “Adventure-Sport”

In the past decade the ADV segment has been a confusing amalgamation of differing interests, and over that time-period, two distinct groups have boiled to the surface. First there are the “Long Way Round” hopefuls, who invariably own a BMW R1200GS/A, and seem to be on some sort of perpetual preparation for an African safari. More recently, a second group has appeared: those riders who look to these big ADV bikes as more versatile Sport-Touring machines. All these riders, and their bikes, have been wedged into a single “Adventure” category, and it has created a bit of confusion for the segment. So, I want to introduce the concept of the “Adventure-Sport” and how it differentiates from the previous “Adventure-Touring” category.

MotoGP: Ducati’s Desmosedici GP15 Officially Delayed

As had been widely expected, Ducati will not have the GP15 ready for the first test at Sepang, in early February. In an interview with the MotoGP.com website, due to be shown on 19th January, Ducati Corse boss confirmed that work was still underway on the all-new bike; and that instead, Ducati will be bringing an uprated version of last year’s bike, dubbed the GP14.3, to test aspects of the new design not requiring the new engine. The delays have been trailed by both Dall’Igna and Paolo Ciabatti, speaking to the media at the Valencia test and at the Superprestigio dirt track event in December. The GP15 is a completely new bike, designed from the ground up, with a completely redesigned engine.

1972 Honda CB500, 3D Printed to Life Size

We’ve talked a bit before about the virtues of 3D printing, and how this increasingly affordable technology could change the consumer landscape as far as how we buy basic parts in the motorcycle industry. For as practical as how 3D printing, or rapid prototyping, can be, it can also be beautiful and used for art. This story is sort of a merger of those two ideas. Jonathan Brand has hoped to buy a 1972 Honda CB500 motorcycle, but the birth of his son changed that plan. Where there is a will though, there is a way, and Brand came up with the next best thing — he built a life-size model of a CB500 with his 3D printer.

Mercedes CEO: No Further Acquisition of MV Agusta

Italians are rejoicing over the news that Mercedes-Benz CEO Dieter Zetsche has made it clear that the German car manufacturer is not interested in acquiring more of MV Agusta’s private stock. Loyal readers will remember that Mercedes-AMG purchased 25% of MV Agusta last October, for a rumored €30 million — echoing the move Audi made in Ducati. Talking at the North American International Auto Show in Detroit though, Zetsche said “however, to avoid what happened with Ducati we point out that we have no intention to take over the business or produce motorcycles. MV Agusta can do it better than us.”

Triumph Has Its Best Sales Year Since Its Rebirth

Good news for Triumph Motorcycles fans, as the British motorcycle marque is reporting a banner year for 2014 — with 54,432 units sold worldwide. That figure is up 4% over 2013’s sales figure of 52,089 units, which was the first time that Triumph broke the 50,000 unit mark since the company’s rebirth in 1984. Helping Triumph reach this new high-water mark was the company’s home market, where Triumph accounted for one-in-five motorcycles sold in the UK (over 500cc). Overall, Triumph saw 8% growth in the UK, as modest growth considering the British market was up roughly 10% last year. The news is not all good, however. Triumph previously reported that financial figures for the first-half of 2014 were down, with revenue down £364 million from £369 million, and net income at a loss of £8 million.

Husqvarna 401 Concepts Will Be 2017 Production Models

One of the more intriguing things to come out of the 2014 EICMA motorcycle show in Milan were Husqvarna’s two “401” concepts, the Vitpilen and Svartpilen. The café-styled bikes are based off the KTM 390 Duke platform, though you wouldn’t know it from looking at them. Husqvarna said at EICMA that if there was sufficient interest, the Vitpilen and Svartpilen could go into production. With an overwhelming critical response from the press and fans, it should come no surprise then that our friends at Bike.se are reporting that Husqvarna intends to make the small-displacement machines a part of its 2017 model lineup.

Ducati Desmosedici Cucciolo Concept by Alex Garoli

Imagine if you will that the first Ducati, the Ducati Cucciolo, and the most modern Ducati, the Ducati Desmosedici, had a child — what would it look like? That far-fetched question nagged Mexican designer Alex Garoli, so he decided to build a concept of the machine. At the core of the Ducati Desmosedici Cucciolo is the V4 powerplant of Italy’s MotoGP race bike, and around it Garoli has imagined a modern steel trellis frame that mimics the bicycle frame look of the post-WWII motorized bicycles that pulled Italy out of deep recession. Of course the most interesting thing about Garoli’s concept is the fact that it’s a ~12:1 scale model. The work is pretty exquisite, even if you don’t agree with the concept’s ethos.

Trouble Broods for Husqvarna as Austrians Come to Varese

04/29/2013 @ 11:08 am, by Michael Uhlarik8 COMMENTS

husqvarna-chainsaw

Only a couple of months after Husqvarnaʼs sale by BMW to Austriaʼs Pierer Industries, the storied motocross brand is once again making headlines, unfortunately of the wrong sort.

Reports from the La Provincia di Varese website, Varese News, as well as motorcycling’s GPOne are saying that the acquisition of Husqvarna has revealed significant problems with massive unsold inventory, labor, and the existing business plan.

As of Monday the 22nd of April, Pierer Industries announced that the factory will be closed until further notice, and let go all of the 211 factory workers employed by Husqvarna. The only staff remaining are in the sales and marketing departments, about 30 people.

Layoffs Reported at Mission Motors

10/10/2012 @ 2:36 am, by Jensen Beeler13 COMMENTS

Asphalt & Rubber has gotten word that Mission Motors has let go of a significant portion of its staff, both on the engineering and non-engineering sides of the San Francisco based startup. With the layoffs presumably the result of a lack of funding, the news comes interestingly just a few months after the departure of Mission’s Chief Financial Officer, Chris Moe, who made his return back to Vectrix in July of this year.

The bulk loss of its workforce is certain to be a blow to Mission Motors, which according to our sources, still has a core team in place to continue basic business operations. Making the switch from being an electric motorcycle company to supplying electric drive components to OEMs in Q1 2010, it wouldn’t surprise us if some of the now former Mission Motors employees found their way into other electric motorcycle manufacturers, and today’s news paints an interesting picture for the future of the Mission R electric superbike.

“Don’t Call It a Management Shake-up” Continues at Zero Motorcycles – Gene Banman Out at as CEO

03/28/2011 @ 7:38 pm, by Jensen Beeler3 COMMENTS

We’ve gotten confirmation from several Bothan spies sources that Zero Motorcycle CEO Gene Banman will no longer hold a position at Zero Motorcycles. We first reported on a management shake-up at Zero last month, with news that high-level changes at the Scotts Valley electric motorcycle company were underway. At the time we could only confirm that Zero Motorcycles founder Neal Saiki was out of his position as the company CTO, and now we can confirm that then CEO Gene Banman was also shown the door during that uprooting.

Vectrix Motocycles on the Chopping Block

04/17/2009 @ 10:04 am, by Jensen Beeler1 COMMENT

vectrix_superbike

Electric motorcycle manufacturer Vectrix looks to be in financial dire straits yet again, and is reportedly looking for either a buyer, or possible merger in order to bail itself out of the deadpool. 

 

Half of KTM’s Full-Time Employees to Switch to Part-Time Work

04/01/2009 @ 4:15 pm, by Jensen BeelerComments Off

ktm_hq

About half of KTM’s 1,500 full-time employees will be shifting to part-time positions between May and August of this year says the Austrian Times. KTM said the measure would apply to all categories of employees, including white-collar employees as well as manual laborers. The move effectively eliminates two months of production, but retains the company’s workforce and manufacturing capacity in hopes of an economic rebound next year. 

The move comes after KTM’s announcement a few months ago in January, which said the Austrian company would lay off 150 workers in its leasing division, and 150 core employees by April this year. KTM chief Stefan Pierer  added that the company was planning to decrease production by 25 %, but said he expected business to get slightly better next year. On the positive side of the news, Pierer also claimed the motorcycle industry was in better shape to survive the recession than the car industry since more people would opt for motorcycles during a recession.

Source: Austrian Time via Hell for Leather

Tagged under: , , , ,