Some Thoughts on MV Agusta & A Story About Two Letters

MV Agusta USA recently invited a slew of journalists down to Fontana, California in order to talk about the company’s new business plan, and to ride its current lineup of motorcycles on the infield course. This article is “Part 1″ of that experience, as I wanted to separate my thoughts on MV Agusta, MV Agusta USA, and the general motorcycling climate into one story, and then have my “not-a-review” of the machines for another article. Got it? Ok, let’s go. It is probably easiest to start with where MV Agusta is as a company. MV Agusta has a started a new three-year business plan, which sees the company pushing into a full-range of motorcycles, pushing outside of its Italian boundaries, and pushing out of the “luxury” brand segment.

Photos: Ducati Desmosedici GP15

The Ducati Desmosedici GP15 is a machine that has been long in the making. It represents Gigi Dall’Igna’s next step forward for the wayward Ducati Corse MotoGP team, and it is the dubious honor of holding the hopes of Ducati fans around the world, who see the machine as the silver bullet that will return Ducati to the forefront of racing prowess — no pressure. The most obvious change that can be seen on the GP15 is the re-routing of the exhaust, with the undertail pipes collecting on the right-hand side of the machine, rather than coming in from both sides and meeting in the middle. Can you spot any other changes in the high-resolution photos after the jump? Let us know in the comments.

Politics & Corruption: Why There Isn’t a Race in Indonesia

If anyone needed any further proof that Indonesia is important to the Japanese motorcycle manufacturers, the fact the Repsol Honda team chose Bali as the location to launch their 2015 MotoGP project should remove any doubt. But if Indonesia is so important to the manufacturers, and to MotoGP, why is there not a race there? Over the course of the MotoGP test at Sepang, I had a few conversations with people on the subject. On the record, the story was always the same: we need a suitable track, and as soon as one exists we will be happy to go there. Off the record, however, they were much less optimistic.

A Requiem for Kenji Ekuan & The Kando of GK Design

Industrial design is not a commonly known, much less well understood, profession. To some it suggests arranging equipment inside factories, to others it means some kind of product engineering. In reality it is the search for, and expression of, human satisfaction in inanimate objects that are mass produced. That’s quite a mouthful, and to the average person it may sound like jiberish written for some pretentious coffee table book, but it is the truth. At least, it is one version of the truth as seen by the GK Design Group of Tokyo, Japan. If you ride motorcycles, then you are intimately familiar with the work of this large and internationally respected studio. Since only its second production bike, the indigenously designed YA-1, every Yamaha motorcycle since 1958 has been crafted by GK.

Are You The MV Agusta F4 RC?

What look to be official photos of the MV Agusta F4 RC have leaked out onto the internet, along with a slide from MV Agusta’s media presentation on the machine. The photos give us our first glimpse into Varese’s homologation special, complete with a special two-can exhaust by Termignoni. The leaked slide confirms some of the numbers being thrown around about the F4 RC, namely that it will have 212hp, 81.86 lbs•ft of torque, weigh 175kg dry, and cost €36,900 (we already know that the MV Agusta F4 RC will cost $46,000 in the USA). Information from a leaked slide last year has already told us that MV Agusta has radically overhauled the F4 RC’s engine, designing a new cylinder heard, new crankshaft, new camshaft, as well as adding bigger fuel injectors, lighter pistons, and titanium connecting rods.

Kenji Ekuan, Designer of the Yamaha VMAX Has Died

Mainstream news is mourning the death of Kenji Ekuan today, as the 85-year-old Japanese industrial designer is one of the most influential artists in Japan’s modern era, and is most well-known for his designing of the iconic Kikkoman soy sauce bottle. Ekuan’s lesser-known works though include a number of motorcycle designs for Yamaha, including the now 30-year-old Yamaha VMAX motorcycle, which makes his passing even more meaningful to motorcyclists around the world. Kenji Ekuan founded GK Industrial Design after WWII, and his company helped shape the way Japan rebuilt itself after the world war.

Ride Review: KTM 1290 Super Adventure

Despite its huge dimensions, not to mention a 30 liter fuel tank, the 2015 KTM 1290 Super Adventure never looks big or bulky. In fact, it is only when you mount the hard luggage that you can tell this bike can really cover long distances. Apart from a dorky little exposed wire from the heated grips near the throttle, the fit and finish is very high-end, especially the integrated curved lighting in the tank — it is quite a sight. At first glance the Super Adventure doesn’t have the massive personality and stance of its German rival, the BMW R1200GS Adventure, but that is in part due to the white color scheme and the absence of the typical beak as a front mudguard. KTM is going about things differently, and that is something that appeals to many riders…including us.

Yamaha VMAX Carbon – Celebrating 30 Years of VMAX

It is hard to believe that the venerable Yamaha VMAX has been around for 30 years (it is even harder to believe that the VMAX has only seen one design revision in that timeframe as well), and so Yamaha is bringing out a special edition model to celebrate this special motorcycle. The 2015 Yamaha VMAX Carbon is exactly as the name implies: a VMAX drag bike laden with lightweight carbon fiber. In total, the VMAX Carbon’s tank cover, front and rear fenders, and side covers are all made from carbon fiber. Yamaha has teamed up with Akrapovic as well, and as such the Slovenian company’s slip-on mufflers complete the exhaust system and the changes to this beastly drag bike.

LEAKED: Here is the 2016 Indian Chief Dark Horse

Cruisers aren’t really our forté, here at Asphalt & Rubber, but breaking stories is…so, without all the typical fanfare, we bring you the first full photos of the upcoming 2016 Indian Chief Dark Horse. The Stead is murdered out and visually appealing, with black engine covers, black fenders, black forks…hell, even the tires are black. Under the hood is Indian’s Thunder Stroke 111 engine, which is an air-cooled 1,811cc v-twin good for 73hp and 100 lbs•ft.More technical features include ABS as standard, a keyless ignition system, cast wheels, and a solo seat. Our Bothan Spies suggest an MSRP of $17,000, and more accessories (all black, natch) than you can fit into the belly of a Tauntaun. Expect to see the Indian Chief Dark Horse launch officially on February 13th elsewhere.

Washington State Weighs Pro Lane-Splitting Law

The Washington State Legislature has a pro lane-splitting bill on its 2015-2016 docket, HB 1515. The law is moderately written, adopting a 10 mph speed differential between the motorcycle and traffic, with a 35 mph speed cap, as acceptable during lane-splitting activities. Loyal Asphalt & Rubber readers will recognize these provisions as being more restrictive than the California Highway Patrol’s now defunct guidelines. Lane-splitting is a near-and-dear topic to us here at A&R, as we believe a national effort to legalize the practice should be mission #1 for the American Motorcyclist Association.

Q&A: Claudio Domenicali Talks Frameless Chassis, Sacred Cows, & The Future for Ducati

05/06/2013 @ 11:04 am, by Jensen Beeler7 COMMENTS

claudio-domenicali

When I sat down with Claudio Domenicali at the Ducati 1199 Panigale R launch, the now-CEO of Ducati Motor Holding was still just the General Manager of the Italian motorcycle company. Four weeks after our interview though, Gabriele del Torchio would leave Ducati for Alitalia; and Domenicali, a 21-year veteran of both the racing and production departments of Ducati, would take his place at the top of Italy’s most prestigious motorcycle brand.

An engineer by education, I found Domenicali just as astute about the nuances of Ducati’s brand as he was skilled on the race track earlier in the day. Our conversation was brief compared to other interviews we have done here at Asphalt & Rubber, but we had time to talk about why the frameless chassis of the Panigale still works while the MotoGP program struggles, the links between Ducati and Ducati Corse, sacred cows for the Italian brand, and the company’s future direction.

Concise, yet insightful, the more I think about Domenicali’s unexpected succession of Del Torchio, the more I think he is the right man for the job. With all the worried talk about the possible “Germanification” of Ducati by its new owners Audi, the German automaker has picked someone who is keenly aware of the importance of the company’s racing operations and heritage, and how that ties into the Ducati brand and what it means to Ducatisti around the world.

With all the internal and external changes that are occurring in the company, Ducati is currently in a state of flux with its new owners, new product lines, and new world-growth plans, and could easily lose its way as a brand, but I see Domenicali as an anchor for Ducati going forward. Greeted to his new job by the revving engines of his employees outside his office window, Domenicali to me now seems like the logical pick for Ducati’s new CEO. After reading our interview from Austin, Texas after the jump, I think you will agree too.

XXX: Ducati 1199 Panigale Naked

12/27/2011 @ 12:45 pm, by Jensen Beeler19 COMMENTS

The 2012 Ducati 1199 Panigale represents a huge step in motorcycle design, mostly due to its frameless chassis or monocoque design. Using the engine as an integral component to the Panigale’s chassis, Ducati’s hallmark achievement was building an integrated headstock/airbox off the front cylinder. With the seat and subframe built off the rear cylinder, and the swingarm bolting directly to the motor, the Ducati 1199 Panigale was able to not only shed 22 lbs of its predecessor’s design, but also continues the Italian company’s new design trend of having components that take on multiple functional roles.

Being sure to keep the fairings on the Ducati 1199 Panigale fastened at all times, we have very little insight as to what Ducati’s new chassis looks like underneath its clothing, and after hounding Bologna for the past few weeks over the issue, these four renders of the Panigale’s frame are the best we can muster for our readers. The black background makes the black frame components hard to see, but the CAD drawings do provide at least some insight as to how the 1199 comes together. If the Panigale goes as well on the track as it does on the spec sheet, you very well could be looking at the future of production motorcycle chassis design.

Ducati Corse Running Parallel MotoGP Project with Aluminum Twin-Spar Chassis

08/18/2011 @ 3:07 pm, by Jensen Beeler21 COMMENTS

While Ducati might not be getting a two-wheel drive system in MotoGP anytime soon, the Italians are apparently in the process of running a parallel program to its MotoGP racing effort that explores the concept of Ducati Corse switching to an aluminum twin-spar frame. Uncovered by French journalist Thomas Baujard of the French magazine Moto Journal (yes, we really wanted to make sure you knew the French were involved with this), Ducati Corse has apparently enlisted the help of a third-party chassis manufacturing and engineering firm to construct a prototype aluminum chassis.

This news plays into the fact that Ducati has absolutely no experience in making an aluminum twin-spar frame, having dropped the steel trellis design for an all carbon fiber version back in 2009. Not wanting to start from zero, like Corse did with the carbon chassis in 2009, and with the “frameless” chassis in 2010, Ducati hopes that with aid from a third party, the Italian company can come up to speed on the twin-spar design, and begin to make improvements for the GP11/GP12 for Valentino Rossi and Nicky Hayden.