Report: Honda RC213V-S Priced at ¥20 Million

According to a report made by The Asahi Shimbun, Japan’s second largest daily newspaper, Honda has green-lit the RC213V-S project, with a price tag of 20 million yen — roughly $170,000 USD. The Honda RC213V-S debuted at the 2014 EICMA show, and was as advertised: a MotoGP race bike with lights and mirrors added to it. Honda teased show-goers and the media by say that the RC213V-S model was only a prototype, adding more fuel to the speculation regarding whether the Japanese firm would actually produce the long-awaited model. Since its inception, price figures have been rumored and banded about, almost all of which were in the six-figure category.

Polaris Acquires Electric Motorcycle Business from Brammo

Polaris Industries has acquired the electric motorcycle business from Brammo, Inc. Polaris is also acting as a leading investor in the recapitalization of Brammo, which will enable Brammo to focus exclusively on the design, development, and integration of electric vehicle powertrains. This means that Polaris will takeover building electric motorcycles at its Spirit Lake, IA production facility, and that Brammo will continue developing EV powertrains for Polaris and other OEM partners. According to its press release, Polaris will start production of electric motorcycles in the second half of 2015.

Ducati Sets Sales Record for 2014 – 45,100 Bikes Sold

Ducati Motor Holding is reporting another record sales year, and that the Italian motorcycle manufacturer sold 45,100 bikes in 2014. This marks the fifth year in a row that Ducati has shown sales growth, and it’s the third year in a row that the sales figures have been an all-time record for the Italian brand. Sales for 2014 were up 2% over 2013, with the USA again leading as Ducati’s most important market (8,804 units sold in the USA). Unsurprisingly, the Asian market is growing quickly for Ducati as well, up 11% in 2014. Ducati attributes its sales growth in-part to its new water cooler Monster line, where the Ducati Monster 1200 and Ducati Monster 821 helped raise Monster sales by 31%, with 16,409 new bikes sold in 2014.

Newspeak: The Advent of the “Adventure-Sport”

In the past decade the ADV segment has been a confusing amalgamation of differing interests, and over that time-period, two distinct groups have boiled to the surface. First there are the “Long Way Round” hopefuls, who invariably own a BMW R1200GS/A, and seem to be on some sort of perpetual preparation for an African safari. More recently, a second group has appeared: those riders who look to these big ADV bikes as more versatile Sport-Touring machines. All these riders, and their bikes, have been wedged into a single “Adventure” category, and it has created a bit of confusion for the segment. So, I want to introduce the concept of the “Adventure-Sport” and how it differentiates from the previous “Adventure-Touring” category.

MotoGP: Ducati’s Desmosedici GP15 Officially Delayed

As had been widely expected, Ducati will not have the GP15 ready for the first test at Sepang, in early February. In an interview with the MotoGP.com website, due to be shown on 19th January, Ducati Corse boss confirmed that work was still underway on the all-new bike; and that instead, Ducati will be bringing an uprated version of last year’s bike, dubbed the GP14.3, to test aspects of the new design not requiring the new engine. The delays have been trailed by both Dall’Igna and Paolo Ciabatti, speaking to the media at the Valencia test and at the Superprestigio dirt track event in December. The GP15 is a completely new bike, designed from the ground up, with a completely redesigned engine.

1972 Honda CB500, 3D Printed to Life Size

We’ve talked a bit before about the virtues of 3D printing, and how this increasingly affordable technology could change the consumer landscape as far as how we buy basic parts in the motorcycle industry. For as practical as how 3D printing, or rapid prototyping, can be, it can also be beautiful and used for art. This story is sort of a merger of those two ideas. Jonathan Brand has hoped to buy a 1972 Honda CB500 motorcycle, but the birth of his son changed that plan. Where there is a will though, there is a way, and Brand came up with the next best thing — he built a life-size model of a CB500 with his 3D printer.

Mercedes CEO: No Further Acquisition of MV Agusta

Italians are rejoicing over the news that Mercedes-Benz CEO Dieter Zetsche has made it clear that the German car manufacturer is not interested in acquiring more of MV Agusta’s private stock. Loyal readers will remember that Mercedes-AMG purchased 25% of MV Agusta last October, for a rumored €30 million — echoing the move Audi made in Ducati. Talking at the North American International Auto Show in Detroit though, Zetsche said “however, to avoid what happened with Ducati we point out that we have no intention to take over the business or produce motorcycles. MV Agusta can do it better than us.”

Triumph Has Its Best Sales Year Since Its Rebirth

Good news for Triumph Motorcycles fans, as the British motorcycle marque is reporting a banner year for 2014 — with 54,432 units sold worldwide. That figure is up 4% over 2013’s sales figure of 52,089 units, which was the first time that Triumph broke the 50,000 unit mark since the company’s rebirth in 1984. Helping Triumph reach this new high-water mark was the company’s home market, where Triumph accounted for one-in-five motorcycles sold in the UK (over 500cc). Overall, Triumph saw 8% growth in the UK, as modest growth considering the British market was up roughly 10% last year. The news is not all good, however. Triumph previously reported that financial figures for the first-half of 2014 were down, with revenue down £364 million from £369 million, and net income at a loss of £8 million.

Husqvarna 401 Concepts Will Be 2017 Production Models

One of the more intriguing things to come out of the 2014 EICMA motorcycle show in Milan were Husqvarna’s two “401” concepts, the Vitpilen and Svartpilen. The café-styled bikes are based off the KTM 390 Duke platform, though you wouldn’t know it from looking at them. Husqvarna said at EICMA that if there was sufficient interest, the Vitpilen and Svartpilen could go into production. With an overwhelming critical response from the press and fans, it should come no surprise then that our friends at Bike.se are reporting that Husqvarna intends to make the small-displacement machines a part of its 2017 model lineup.

Ducati Desmosedici Cucciolo Concept by Alex Garoli

Imagine if you will that the first Ducati, the Ducati Cucciolo, and the most modern Ducati, the Ducati Desmosedici, had a child — what would it look like? That far-fetched question nagged Mexican designer Alex Garoli, so he decided to build a concept of the machine. At the core of the Ducati Desmosedici Cucciolo is the V4 powerplant of Italy’s MotoGP race bike, and around it Garoli has imagined a modern steel trellis frame that mimics the bicycle frame look of the post-WWII motorized bicycles that pulled Italy out of deep recession. Of course the most interesting thing about Garoli’s concept is the fact that it’s a ~12:1 scale model. The work is pretty exquisite, even if you don’t agree with the concept’s ethos.

Analysis: Ducati’s Non-MSMA Entry Machines for MotoGP – A Great Gamble with the New Regulations

07/01/2013 @ 4:15 pm, by David Emmett16 COMMENTS

2013-desmosedici-gp13-cota-motogp-jensen-beeler

At Assen, Ducati MotoGP Project Director Paolo Ciabatti revealed that they too will be offering bikes for non-MSMA teams in 2014. While Honda is selling a simplified production racer version of the RC213V, and Yamaha is to lease M1 engines, the package Ducati is offering could turn out to be very interesting indeed.

Instead of producing a separate machine, Ducati will be offering the 2013 version of the Desmosedici to private teams, to be entered as non-MSMA entries, and using the spec-electronics hardware and software package provided by Magneti Marelli.

Although the current 2013 machine is still far from competitive – at Assen, the two factory Ducatis finished 33 seconds behind the winner Valentino Rossi, and behind the Aprilia ART machine – the special conditions allowed for non-MSMA entries make the Desmosedici a much more interesting proposition.

MotoGP: Michele Pirro Will Replace Ben Spies at Jerez – Ducati Desmosedici GP13 Development Bike to Debut

04/30/2013 @ 2:03 pm, by Jensen Beeler23 COMMENTS

michele-pirro-ducati-desmosedici-gp13-development

With the news that Ben Spies will skip  the upcoming race in Jerez, and instead nurse his injured shoulder, Ducati has unsurprisingly tapped its GP test-rider Michele Pirro to help replace the American for the Spanish GP.

Taking one of his three planned wild card rides this year, Pirro will not only help maintin the ranks in the Ducati squads, but will also campaign the Ducati Desmosedici GP13 development bike during the race weekend for Ducati Corse.

Up-Close with the Ducati Desmosedici GP13

04/25/2013 @ 12:26 pm, by Jensen Beeler40 COMMENTS

2013-Desmosedici-GP13-COTA-MotoGP-15

It’s hard to get up-close with the Ducati Desmosedici GP13. For starters, she’s always traveling somewhere — a slave to her jet-setter lifestyle. And, when she finally touches down long enough for you to get a glimpse of her, she’s surrounded by men in red uniforms, who whisk her out of sight almost immediately.

Occasionally though, she gets all buttoned-up and makes a public appearance, and if you have the right credentials (not an easy feat in its own right), you can elbow your way in for a look at her scarlet glow.

Dodging other bikes, riders, and mechanics in the hot pit lane of the Grand Prix of the Americas, we had such a brief opportunity, and thus bring you our spoils from the moment. We have been up-close with a number of race bikesexotics, and even exotic race bikes, but the Desmosedici GP13 stands out even in that prestigious crowd.

A rolling piece of unobtanium, with the very best of what is available in the two-wheeled world gring its chassis, and yet Ducati’s four MotoGP riders struggle mightily with the machine. Maybe if we look closely enough, we can figure out why. Twenty-two 2000px-wide photos are waiting for you after the jump.

Are You the Ducati Desmosedici GP13?

01/14/2013 @ 2:48 pm, by Jensen Beeler16 COMMENTS

ducati-desmosedici-gp13-spy-photo

UPDATE: Nope, according to Italian TV’s Gudio Meda, it is a model built from leftover parts of the GP3 & GP7. For those picking out those design elements, good eye!

While the official launch of the Ducati Desmosedici GP13 is supposed to be tomorrow, the folks at GPinside have seemingly snagged this photo of the GP13 at the 2013 Wrooom event that Ducati co-hosts with Scuderia Ferrari. While the livery appears relative unchanged, there are several noticeable changes to the Desmosedici GP13, namely the skinnier tail section.

Our eyes also spot changes to the exhaust system, with a much shorter side-pipe, and what appears to be a larger undertail cannister. The fairings have also been refined from their previous shape, and give away a figure that’s longer than the GP12 (shown after the jump), with noticeably fewer side vents.