Report: Honda RC213V-S Priced at ¥20 Million

According to a report made by The Asahi Shimbun, Japan’s second largest daily newspaper, Honda has green-lit the RC213V-S project, with a price tag of 20 million yen — roughly $170,000 USD. The Honda RC213V-S debuted at the 2014 EICMA show, and was as advertised: a MotoGP race bike with lights and mirrors added to it. Honda teased show-goers and the media by say that the RC213V-S model was only a prototype, adding more fuel to the speculation regarding whether the Japanese firm would actually produce the long-awaited model. Since its inception, price figures have been rumored and banded about, almost all of which were in the six-figure category.

Polaris Acquires Electric Motorcycle Business from Brammo

Polaris Industries has acquired the electric motorcycle business from Brammo, Inc. Polaris is also acting as a leading investor in the recapitalization of Brammo, which will enable Brammo to focus exclusively on the design, development, and integration of electric vehicle powertrains. This means that Polaris will takeover building electric motorcycles at its Spirit Lake, IA production facility, and that Brammo will continue developing EV powertrains for Polaris and other OEM partners. According to its press release, Polaris will start production of electric motorcycles in the second half of 2015.

Ducati Sets Sales Record for 2014 – 45,100 Bikes Sold

Ducati Motor Holding is reporting another record sales year, and that the Italian motorcycle manufacturer sold 45,100 bikes in 2014. This marks the fifth year in a row that Ducati has shown sales growth, and it’s the third year in a row that the sales figures have been an all-time record for the Italian brand. Sales for 2014 were up 2% over 2013, with the USA again leading as Ducati’s most important market (8,804 units sold in the USA). Unsurprisingly, the Asian market is growing quickly for Ducati as well, up 11% in 2014. Ducati attributes its sales growth in-part to its new water cooler Monster line, where the Ducati Monster 1200 and Ducati Monster 821 helped raise Monster sales by 31%, with 16,409 new bikes sold in 2014.

Newspeak: The Advent of the “Adventure-Sport”

In the past decade the ADV segment has been a confusing amalgamation of differing interests, and over that time-period, two distinct groups have boiled to the surface. First there are the “Long Way Round” hopefuls, who invariably own a BMW R1200GS/A, and seem to be on some sort of perpetual preparation for an African safari. More recently, a second group has appeared: those riders who look to these big ADV bikes as more versatile Sport-Touring machines. All these riders, and their bikes, have been wedged into a single “Adventure” category, and it has created a bit of confusion for the segment. So, I want to introduce the concept of the “Adventure-Sport” and how it differentiates from the previous “Adventure-Touring” category.

MotoGP: Ducati’s Desmosedici GP15 Officially Delayed

As had been widely expected, Ducati will not have the GP15 ready for the first test at Sepang, in early February. In an interview with the MotoGP.com website, due to be shown on 19th January, Ducati Corse boss confirmed that work was still underway on the all-new bike; and that instead, Ducati will be bringing an uprated version of last year’s bike, dubbed the GP14.3, to test aspects of the new design not requiring the new engine. The delays have been trailed by both Dall’Igna and Paolo Ciabatti, speaking to the media at the Valencia test and at the Superprestigio dirt track event in December. The GP15 is a completely new bike, designed from the ground up, with a completely redesigned engine.

1972 Honda CB500, 3D Printed to Life Size

We’ve talked a bit before about the virtues of 3D printing, and how this increasingly affordable technology could change the consumer landscape as far as how we buy basic parts in the motorcycle industry. For as practical as how 3D printing, or rapid prototyping, can be, it can also be beautiful and used for art. This story is sort of a merger of those two ideas. Jonathan Brand has hoped to buy a 1972 Honda CB500 motorcycle, but the birth of his son changed that plan. Where there is a will though, there is a way, and Brand came up with the next best thing — he built a life-size model of a CB500 with his 3D printer.

Mercedes CEO: No Further Acquisition of MV Agusta

Italians are rejoicing over the news that Mercedes-Benz CEO Dieter Zetsche has made it clear that the German car manufacturer is not interested in acquiring more of MV Agusta’s private stock. Loyal readers will remember that Mercedes-AMG purchased 25% of MV Agusta last October, for a rumored €30 million — echoing the move Audi made in Ducati. Talking at the North American International Auto Show in Detroit though, Zetsche said “however, to avoid what happened with Ducati we point out that we have no intention to take over the business or produce motorcycles. MV Agusta can do it better than us.”

Triumph Has Its Best Sales Year Since Its Rebirth

Good news for Triumph Motorcycles fans, as the British motorcycle marque is reporting a banner year for 2014 — with 54,432 units sold worldwide. That figure is up 4% over 2013’s sales figure of 52,089 units, which was the first time that Triumph broke the 50,000 unit mark since the company’s rebirth in 1984. Helping Triumph reach this new high-water mark was the company’s home market, where Triumph accounted for one-in-five motorcycles sold in the UK (over 500cc). Overall, Triumph saw 8% growth in the UK, as modest growth considering the British market was up roughly 10% last year. The news is not all good, however. Triumph previously reported that financial figures for the first-half of 2014 were down, with revenue down £364 million from £369 million, and net income at a loss of £8 million.

Husqvarna 401 Concepts Will Be 2017 Production Models

One of the more intriguing things to come out of the 2014 EICMA motorcycle show in Milan were Husqvarna’s two “401” concepts, the Vitpilen and Svartpilen. The café-styled bikes are based off the KTM 390 Duke platform, though you wouldn’t know it from looking at them. Husqvarna said at EICMA that if there was sufficient interest, the Vitpilen and Svartpilen could go into production. With an overwhelming critical response from the press and fans, it should come no surprise then that our friends at Bike.se are reporting that Husqvarna intends to make the small-displacement machines a part of its 2017 model lineup.

Ducati Desmosedici Cucciolo Concept by Alex Garoli

Imagine if you will that the first Ducati, the Ducati Cucciolo, and the most modern Ducati, the Ducati Desmosedici, had a child — what would it look like? That far-fetched question nagged Mexican designer Alex Garoli, so he decided to build a concept of the machine. At the core of the Ducati Desmosedici Cucciolo is the V4 powerplant of Italy’s MotoGP race bike, and around it Garoli has imagined a modern steel trellis frame that mimics the bicycle frame look of the post-WWII motorized bicycles that pulled Italy out of deep recession. Of course the most interesting thing about Garoli’s concept is the fact that it’s a ~12:1 scale model. The work is pretty exquisite, even if you don’t agree with the concept’s ethos.

Recall: 2013 Kawasaki Ninja 300

08/12/2013 @ 3:53 pm, by Jensen Beeler3 COMMENTS

2013-Kawasaki-Ninja-300

It would seem that even the popular Kawasaki Ninja 300 isn’t immune from the plethora of recalls we have seen the past few weeks, as Kawasaki Motors Corporation is recalling certain 2013 Kawasaki Ninja 300 and 2013 Kawasaki Ninja 300 ABS motorcycles manufactured between July 16, 2012 and April 27, 2013.

2013 Kawasaki Ninja 300 – Coming to America for $4,799*

09/13/2012 @ 1:34 pm, by Jensen Beeler18 COMMENTS

There is not much that we don’t already know about the 2013 Kawasaki Ninja 300. It looks pretty much exactly like the re-designed 2013 Kawasaki Ninja 250R that broke cover in Indonesia earlier this year. The EPA already spilled the beans on the Kawasaki Ninja 300’s 296cc displacement and 40hp, and we know that the Ninja 300 is the peppier fuel-injected cousin to America’s dreadfully under-developed Ninja 250R…and now we know that the bike will come to the American market for next year.

Tipping the scales at the curb with 387 lbs, with its 4.5 gallons of fuel, the Kawasaki Ninja 300 isn’t a featherweight, but it isn’t a slouch either. In fact, when it comes to a sporty learner-class motorcycle for the American market, the Kawasaki Ninja 300 may very well be the bike of choice.

In a category where prospective buyers are raiding the couch cushions for a down payment, price is king. And with its $4,799 starting MSRP, the Ninja 300 is an expensive option, but is it still a bargain?

2013 Kawasaki Ninja 300 – For Europe…& America Too?

09/04/2012 @ 7:16 am, by Jensen Beeler14 COMMENTS

Confirming what we already knew, the 2013 Kawasaki Ninja 300 broke cover today, and is Team Green’s newest small-displacement sport bike in its motorcycle lineup. 296cc’s of twin-cylinder fury, Kawasaki the Ninja 300 boasts 40hp, twin-butterfly valves, fuel injection, a slipper clutch, a 140mm rear tire, and has optional ABS. A part of a larger movement within Kawasaki, the Ninja 300 exemplifies the “no replacement for displacement” school of thought, and will sell along-side the recently updated (and virtually visually identical) Kawasaki Ninja 250R in more than a few markets.

While we know that the 2013 Kawasaki Ninja 300 is set to debut for our European readers, the big question mark will be whether the small sport bike will come to the North American markets. A spreadsheet from the EPA seems to suggest that will be the case, though it points to a carbureted Kawasaki Ninja 205R and fuel-injected Kawasaki Ninja 400R coming to the US as well, making for one impacted learner-bike market. Meanwhile, reports from Canada confirm that their 250R will also be of the carbureted variety.

The news confirms out suspicion that the Ninja 250R will remain the under-powered, and standard-styled, carbureted learner-bike it has always been in North America, while the Ninja 300 becomes the peppy small-displacement sport bike that we haven’t realized that we will lust over later this fall. Presumably then, the Kawasaki Ninja 300 will go head-to-head with the CBR250R and upcoming KTM Moto3-inspired street bike, among other models.

2013 Kawasaki Ninja 300 Outed – Team Green’s Answer for a Small-Displacement Sport Bike in the USA?

08/27/2012 @ 7:57 pm, by Jensen Beeler27 COMMENTS

Two curious things happened today: an EPA certification document outed details on the 2013 Kawasaki Ninja ZX-6R and Kawasaki USA announced the “global debut of its 2013 line of iconic Ninja motorcycles in New York’s Times Square.” Add in to the mix that the EPA documents also make mention of Kawasaki Ninja 300 & Kawasaki Ninja 400R models, along with the recently updated Kawasaki Ninja 250R, and Team Green could very well be dropping the news about three or four brand new models for the US market.

Of course what is really interesting about this news is how Kawasaki could do a two-fold offer of 300cc & 400cc bikes in the US market, and how those two models would fit alongside the Ninja 250R, which we can only assume will be updated in the United States to the model that was debuted in Indonesia earlier this month. Or will it?