Up-Close with the Krämer HKR EVO2 R

If I said that there was an 81hp track bike that weighed less than 280 lbs ready to race, would that be something you’d be interested in? If so, say hello to the Krämer HKR EVO2, a purpose-built track bike from Germany. Built around KTM’s 690cc single-cylinder engine, which is found in KTM 690 Duke and Husqvarna’s 701 series of bikes, the Krämer HKR EVO2 features a bespoke steel-trellis chassis, custom bodywork, and a host of top-shelf components. The real tasty part about the Krämer HKR EVO2 though is the attention to detail and the purposefulness of its design – take for instance the 12-liter XPE plastic fuel tank that doubles as a subframe, which has integrated crash sliders, and a sighting hole for easy adjustment of the rear shock damping.

Motorcycle Sales in Europe Show Strong Growth

Motorcycle sales in the United States might be tanking, but things are looking fairly positive across the pond in Europe, as the ACEM reports a 4.7% increase in motorcycle sales for Q1 2018, for a total of 203,853 units sold in the first three months of this year. The increase in sales is due to key markets like France (+9.1%), Germany (+1.9%), and the UK (+7.4%) showing good growth, compared to Q1 2017. However, not all the European countries are showing increases in motorcycle sales, with the Czech Republic (-17.3%), Poland (-28.7%), and Austria (-18.9%) pulling the sales growth figure down considerably. Not all segments are growing too. While the big bikes are seeing sales increases, European sales for mopeds are down considerably for Q1 2018 (40.2%), to the tune of a 24,996 unit sales decline over last year.

This Week’s Honda V4 Superbike Rumor

I have to admit, this rumor is more than a week old, as Japanese magazine Young Machine breathed new life into the Honda V4 superbike rumor mill about a month ago. And of course, the reality is that this rumor is much, much older than this tiny fraction of time. If you know your motorcycle news history, talk of a Honda V4 replacement for the CBR1000RR line has existed for almost two decades now…but hey, a broken clock is correct twice a day, right? So what is new from the Land of the Rising sun that we haven’t heard before? The big eye-catching component to this story is that Honda has/had a two-stage upgrade path for the CBR1000RR, of which we are about to see the second phase.

Official: Alta Motors Racing at the 2018 Erzberg Rodeo

We broke the story yesterday, but today the news is officially official: Alta Motors will race in the 2018 Ezerberg Rodeo, which is part of the Red Bull Hard Enduro series. The most grueling and difficult single-day event in motorcycle racing, the Erzberg Rodeo sees 1,500 entires whittled down into what is usually a single-digit summation of race-finishers – and not every year sees a racer cross the finish line – that’s how tough this race is. Racing for Alta Motors will be Ty Tremaine and Lyndon Poskitt, two riders with a lot of off-road experience. For those who don’t recognize those names, Tremaine is currently racing with Alta in the 2018 AMA EnduroCross series, meanwhile Poskitt has previously competed in a number of enduro events, including the Ezberg Rodeo, and most notably just soloed the 2018 Dakar Rally to completion. 

Come Drool Over SERT’s All New Endurance Race Bike

The winningest team in the FIM Endurance World Championship, the Suzuki Endurance Racing Team is the standard by which other endurance teams are measured…and that is a measuring stick that has seen a lot of use in recent seasons. This is because the FIM EWC is a hot bed for competition right now, with a bevy of factory-backed teams capable of winning on any race weekend. This has made it tough for SERT, and its riders Vincent Philippe, Etienne Masson, and Gregg Black, who currently sit sixth in the 2018 FIM Endurance World Championship standings. For this season, SERT hopes that a new racing platform will make the difference, as the French team has finally jumped onboard with the current-generation Suzuki GSX-R1000.

Johann Zarco Signs Two-Year Deal with KTM

One of the biggest dominoes of the 2018 MotoGP Silly Season has just fallen into place. Today, KTM announced that they have signed Johann Zarco to a two-year contract for the 2019 and 2020 seasons. That Zarco would leave the Monster Yamaha Tech3 squad had been widely anticipated, the only question being which factory team he would end up in. The Frenchman was an extremely hot property, after displaying blistering speed on the satellite Yamaha M1 in 2017. Zarco had offers from Suzuki, Repsol Honda, and KTM, though only Honda and KTM were in the frame for the Frenchman. Zarco and his management were still unhappy with the way Suzuki had treated the Frenchman, after the Japanese factory failed to honor a pre-contract Zarco had signed ahead of the 2017 season, choosing Alex Rins instead.

The Ducati Panigale V4 Gets Its First Two Recalls

New model teething issues are always a reality, and it seems that the Ducati Panigale V4 is no exception to the rule. Finding not one, but two issues with the Panigale V4’s fueling system, Italy’s newest superbike is being recalled in the United States. Both recalls seem to affect the full-lot of Panigale V4 models that have made it to US soil thus far this year, which means 692 units (base, S, and Special trim levels) are being recalled for two issues related to the bike’s fuel system. As such, the first recall centers around the breathing system valve plug on the Panigale V4, which might have a fuel leak if the O-ring was damaged during production. Accordingly, the second recall involves the fuel tank cap, which can spray gas when opened, because again of breathing issues within the fuel system.

Are BMW’s Heritage Models Finally Done?

Has BMW Motorrad called it quits for its heritage lineup of motorcycles? That is the rumor at least, and there is some good evidence to support the notion. This is because buried on the 60th turn of BMW’s 260-page annual report for 2017 is the headline: “R nineT family now complete” – a nod that the German brand’s lineup of air-cooled retro-styled motorcycles has reached its zenith and logical conclusion. That makes sense, since there isn’t really a category left of the R nineT family to explore. It has a roadster, a standard, a scrambler, an adventure bike, and a café racer model all in the lineup. No hipster stone has been left unturned. The post-authentic styling trend is over. It’s dead. BMW called it, right? Well…Not so fast.

Up-Close with the 2018 Aprilia RSV4 RF LE

At the Grand Prix of the Americas, Aprilia USA debuted a special new superbike for the 2018 model year, the Aprilia RSV4 RF LE. Limited to only 125 units for North America (100 for the USA, 25 for Canada), the big feature of the 2018 Aprilia RSV4 RF LE is the bike’s fairing winglets, which draw from Aprilia Racing’s aerodynamic progress in the MotoGP Championship. Getting a chance to see the new Aprilia RSV4 RF LE in the flesh while in Texas, we grabbed some up-close photos of this limited edition RSV4, for your viewing pleasure, along with some other details. Aprilia’s wings are an interesting development, and a brave new world for production superbike design. For its part too, it seems that Aprilia isn’t quite sure what to make of the development as well, offering us two narratives for the winglets.

BMW Shows Off 3D Printed BMW S1000RR Frame

Ultimately, I think we are going to come back to this story several times over the next few weeks, as there is so much going on here, from such a simple thing, that one story just won’t do it all justice. To start things off though, let’s look at the basics…as the BMW Group recently hosted what it called the BMW Group Digital Day 2018, which was basically a showcase for all the cool technologies that the Bavarians are using to create a digital frontier that will reshape the human condition. Most of the technology concerns BMW’s automotive business, but there was one little tidbit that could be of interest for motorcycle fans: the 3D printed frame for a BMW S1000RR superbike. Built using additive manufacturing technology, a chassis is created a computer file and metal dust.

Brammo Empulse Gets Minor Updates for 2014

02/03/2014 @ 4:25 pm, by Bryan Delohery7 COMMENTS

2014-Brammo-Empulse-R-03

Oregon based electric motorcycle company Brammo has announced the release of updated Empulse and Empulse R models for 2014.

The changes to the 2014 Brammo Empulse electric motorcycles are minimal at best, and primarily coming in the form of an updated and waterproof LCD dash, Continental Sport Attack 2 tires, and tapered aluminum handle bars for better riding stance.

Significant figures have also been updated, with Brammo Claiming a top speed of 110 mph for the Empulse, while the weight has been dropped by 10 lbs to 460 lbs at the curb. Both the Empulse and Empulse R both produce 54 hp, but the R produces 66 lb-ft of torque compared with 46.5 for the base model.

Continue Reading

2012 Brammo Empulse R – Was It Worth the Wait?

05/09/2012 @ 11:24 am, by Jensen Beeler41 COMMENTS

Launching last night in downtown Los Angeles, the 2012 Brammo Empulse R & 2013 Brammo Empulse broke their cover and officially debuted. Right off the bat from the designations, you can see that Brammo intends for the Empulse R to be a 2012 model, with the base model Emuplse coming out next year (more on that further down). As we expected, the Brammo Empulse R got quite the price bump after its 22-month marination, and will be $18,995 MSRP. Meanwhile when the Brammo Empulse becomes available next year, it will have a slightly more palatable $16,995 price tag.

Featuring a six-speed gearbox the Brammo Empulse R comes with a 54hp motor, 10.2 kWh battery pack (9.31 kWh nominal), and a bevy of brand-name components like Marchesini wheels, Brembo brakes, Marzocchi forks, a Sachs rear shock, and a few carbon pieces (read the full technical specifications here). Getting a revised look, the basic Empulse design is still there with some subtle changes (some for the better, some of the worse, in our humble opinion). Touting 56 highway miles and 120 city miles, the Empulse is going to suffer from the same range-limiting use that other electric bikes on the market are facing, though Brammo has thought to include J1772 Level 2 capability on the bike, which should make for some more rapid charges away from the mothership. We like that.

Continue Reading