Honda Africa Twin Supermoto Concept by Nicolas Petit

The Honda Africa Twin doesn’t lend itself naturally to a supermoto format, though it is one of the most capable off-road adventure bikes on the market, but you have to admit that this photoshop render by French designer Nicolas Petit is very intriguing. Maybe it’s our obvious bias towards anything supermoto that is talking, or maybe it’s that there is something to the idea of taking the Africa Twin, adding 17” wheels, and lowering it just enough that riders can actually flat-foot the machine while sitting on it. Add in some styling cues that scream “supermotard” and you have a very handsome machine that is ready to conquer anything the urban environment can throw at it. Hell, it’s probably just a scary clown costume away from a good time on a gravel road. Right??!

Brad’s Leggero by Walt Siegl

The latest creation from Walt Siegl Motorcycles, Brad’s Leggero helps fill the void left behind by the departure of the Ducati Sport Classic from the Italian company’s lineup. Speaking to those who long for simpler machines, at the core of the Leggero is an air-cooled two-valve Ducati engine, which was built and blueprinted by Bruce Meyers Performance. Helping complete the café racer look is the bullet fairing bodywork, which takes a dash of modern by being made of Kevlar. The modern touches continue, with the use Öhlins suspension and radially mounted Brembo brakes. The effect is a tastefully done café racer that not only shines with real craftsmanship, but also does post-heritage right: taking the best of design from the past, without snubbing the progress of technology in the future.

More Photos of the 2017 Yamaha YZF-R6

Loyal Asphalt & Rubber readers will know how much we like our high-resolution photos here at A&R, so we wanted to make sure you could get a good high-res look at the 2017 Yamaha YZF-R6 that debuted today at the AIMExpo in Orlando, Florida. Yamaha has left its class-leading bike mostly unchanged for the next model year, when it comes to the R6 motor and chassis, which might disappoint some. But with the addition of R1-inspired styling, traction control, ABS brakes, and better suspension pieces, we think supersport fans will be pleased with this update. With the bar now set higher in the 600cc realm, hopefully we will see other manufacturers take up the challenge, and the supersport class will have new life breathed into it. We’ll have to wait and see on that. Until then, enjoy this modest photo gallery.

2017 Yamaha YZF-R6 Gets ABS, Traction Control, & More

The wait is finally over, as the 2017 Yamaha YZF-R6 debuted today at the AIMExpo in Orlando, Florida. As expected, the new Yamaha R6 visually borrows from the recently updated R1, with a similar headlight and intake setup featuring now on both machines. On the technical side of things, the 2017 Yamaha R6 is more evolution than revolution, with the basic chassis and engine configuration staying the same. However, updates for 2017 include a revised suspension package, ABS brakes, riding modes via ride-by-wire, traction control, and an optional quickshifter. While more of a model refresh, than an all-new model, Yamaha has gone to great lengths to improve upon a machine that is already leading the supersport category.

HJC Is Coming Out with Star Wars Themed Helmets

Pardon me while I geek out, just a little bit. It looks like HJC has gotten the rights to make Star Wars themed helmets for their 2017 collection. Right now, HJC is showing two helmets, one that mimic’s Kylo Ren’s helmet in The Force Awakens, and the other that replicates Boba Fett’s iconic lid. Both of these themed helmets are based off the HJC RPHA 11 helmet, the company’s top-of-the-line helmet, which also serves as a platform for HJC’s other branded, tribute, and special edition helmets. There will also be a “Death Trooper” helmet, based on the HJC FG-17 helmet, that will debut in time to milk interest from the opening of Rogue One. It should be noted that rumors about a possible Princess Lela helmet, with side-mounted hair buns, are unfounded and possibly started by this publication.

2017 Aprilia Tuono V4 1100 Factory – Just Add Öhlins

It goes without saying that if the 2017 Aprilia Tuono V4 1100 is getting a list of updates at INTERMOT, then the same must be true for the Factory version of the potent 175hp streetfighter. This means that the 2017 Aprilia Tuono V4 1100 Factory takes the new fourth-generation APRC electronics package, Bosch-powered cornering ABS, improved combustion chamber, larger exhaust can, and adds to it the typical Factory-spec improvements like Öhlins suspension (including an Öhlins steering damper). If you haven’t ridden the Aprilia Tuono V4 1100 RR or Factory, we highly recommend it – they’re so choice. The Aprilia Tuono V4 1100 easily competes as one of our favorite motorcycles at Asphalt & Rubber.

2017 Yamaha MT-10 SP – Putting the Europeans on Notice

What you’re looking at is the 2017 Yamaha MT-10 SP, a new edition of Iwata’s crossplane-power streetfighter. Despite being just a few bolted-on parts, the Yamaha MT-10 SP is one of the more interesting machines to debut in INTERMOT today. This is because it pits the Yamaha MT-10 directly against the streetfighter offerings from the European brands – something that was already occurring with the MT-10/FZ-10, even if it was unintended. The Yamaha MT-10 SP though gives the Japanese a more proper machine to go toe-to-toe with the likes of the Super Duke R, Tuono V4 1100, and other models. To do this, Yamaha has added semi-active suspension, courtesy of Öhlins. A quickshifter has also been added, along with an assist & slipper clutch.

The Yamaha MT-09 Gets a Facelift & More for 2017

Yamaha’s MT line runs with the tagline “The Dark Side of Japan” and promises edgy and affordable street bikes for urban riders. Someone in Iwata, Japan must have thought that the current Yamaha MT-09 wasn’t quite edgy enough though, which is the only way we can explain the 2017 Yamaha MT-09, which debuted today at the INTERMOT show in Cologne, Germany. Now with a “twin-eyed” LED headlight design, the Yamaha MT-09 feels a little bit more at home when parked next to the Yamaha MT-10 / Yamaha FZ-10 streetfighter. Other changes include an assist/slipper clutch, quickshifter, new suspension, and a redesigned tail section and fender.

Honda CBR1000RR SP2 – Big Red’s New Racing Platform

The current state of the World Superbike Championship rules entirely encourage the adoption once again of “homologation specials” – production bikes whose sole purpose is to be used on the race track. While none of the manufacturers have adopted a radical approach with their homologation special designs, this year’s INTERMOT show has already seen several such machines introduced, the Kawasaki Ninja ZX-10RR, the Suzuki GSX-R1000R, and the Honda CBR1000RR SP2. For Honda, the differences between the SP and SP2 aren’t terribly radical, but they are more purposeful. The 2017 Honda CBR1000RR SP2 does come with several visual cues that are different from the CBR1000RR SP model: carbon insert panels, gold striping on the tri-color paint scheme, and the more obvious Marchesini wheels.

2017 Ducati SuperSport – The Sport Bike Returns

The Ducati SuperSport is back for the 2017 model year, bringing a street-focused sport bike into Ducati’s motorcycle lineup once again. As you would expect, the 2017 Ducati SuperSport will come in two models, the SuperSport base model and a higher-spec SuperSport S model. Both bikes use the 937cc, water-cooled, 113hp v-twin engine that’s found in the Ducati Hypermotard 939. Ducati has also used a steel trellis frame for the SuperSport, which looks very similar to the one used on the current Monster line. Obviously, the front fairing takes some cues from the Panigale superbike. Ducati’s focus is for the SuperSport to augment its street lineup with something sporty that could go on the race track, but would be more at home on twisty roads, even with a passenger on the back.

BRD RedShift Price & Specs – $14,995 (MX) / $15,495 (SM)

09/28/2011 @ 7:21 pm, by Jensen Beeler24 COMMENTS

After several months of testing and refining the BRD RedShift electric motorcycle, pricing and technical specifications from BRD Motorcycles has just graced our inbox. Wanting to make sure the BRD RedShift SM & RedShift MX lived up to the company’s hype, BRD has been reluctant to quote exact figures and prices until the San Francisco startup was confident it could back up those announcements with actual product performance. True to our prediction at the time of the BRD RedShift SM’s launch, the MX version will come with a $14,995 price tag, while the SM supermotard will tack on an extra $500 for a $15,495 MSRP.

Making 40 peak-horsepower, the BRD RedShift touts 250cc bike specs, especially with its 260/265 lbs (SM/MX) curb weight for street use (headlight and switchgear). In racing trim, both the SM & MX shed an additional 10 lbs. Because of the interest being generated in the police-style model (RedShift PD), BRD will make the model available with its more robust tail section, hard luggage, and more powerful electrical system for powering electrical components. These added components add an additional 35 lbs to the RedShift’s base weight, though the PD model is expected to be the company’s best selling model, as public and private fleet vehicles are increasingly pressured to include electrics into their vehicle pools.

Radical Ducati Mikaracer

02/14/2011 @ 5:55 am, by Jensen Beeler8 COMMENTS

The Spanish custom bike scene continues to warm our hearts as Radical Ducati (Happy 10th year anniversary guys!) has just created another v-twin masterpiece. Taking a Ducati Superbike 1098 frame and motor, RAD has worked its touches into this desmodromic dreamboat with its usual flare. It’s easy to spot the Spanish team’s design ideas and inspirations that we’ve seen on some of its other bikes, but the exhaust on this Ducati Mikaracer certainly stands out as something unique and special.

Part GP racer, part street tracker, the asymetrical mounting might have our OCD in a tizzy, but the result is also very striking and sounds oh so good (check the video after the jump). The tail section on the Mikaracer also pops-out, if for no other reason than the fact it looks like it was removed from a giant hornet’s thorax (you almost want to drag the Spanish equivalent of the DMV into the street for ruining things with that license plate and holder though), which is becoming a hallmark feature for RAD’s bikes. Photos, video, and technical/build specs after the jump.

Officially Official: 2011 Aprilia Dorsoduro 1200

11/01/2010 @ 9:48 pm, by Jensen Beeler4 COMMENTS

After first making the 2011 Aprilia Dorsoduro 1200’s owner’s manual available to Aprilia owners, then showing a photo of the Dorsoduro 1200 during Piaggio’s HQ launch in Milan, along with a subsequent video, Aprilia is now ready to officially tell us about its 2011 Aprilia Dorsoduro 1200. Available with Aprilia Traction Control (ATC) and anti-lock brakes (ABS) as an option, the Dorsoduro 1200 makes 130hp and 83 lbs•ft of torque with its 492lbs curb weight (a figure Aprilia conveniently leaves out of its press release). The maximoto to the Shiver’s street-naked, the Aprilia’s 1197cc liquid-cooled platform is under-powered and over-weight when compared to the other bikes in the 1200cc category.

While Aprilia positions the Dorsoduro as a maximotard, we’re not sure how the lack of umpf and extra heft will go over with the sporty crowd. With rumors of a Shiver 1200 still circling about, and an early glimpse of the Tuono V4R already showing a 162hp machine, we’re still not sure how this 1200cc street-only motard fits into Aprilia’s model line-up, and how it will differentiate itself to potential buyers.

2010 Yamaha Fazer8 ABS – Also Officially Official & With Anti-Lock Brakes

03/12/2010 @ 2:47 am, by Jensen Beeler1 COMMENT

Along with the 2010 Yamaha FZ8, Yamaha Europe has finally officially released the 2010 Yamaha Fazer8 ABS. The 800cc cousin to the FZ8, the Fazer8 gets the obvious anti-lock brake treatment as the name implies. Drawing on styling cues from the larger FZ1, the FazerOcho distinguishes itself by what lies beneath its exposed motor. As was rumored, the Fazer8 borrows from the FZ1’s 998cc motor’s stroke length, making up the smaller displacement with a smaller bore diameter (68mm down from 77mm). Check out the full technical specifications and photos after the jump.