California Formalizes Lane-Splitting Law

It finally happened, Governor Jerry Brown signed AB 51 into law, making California the first state to put lane-splitting on its books. Lane-splitting has always been legal of course (despite what other headlines might suggest), though was legal only by a technical loophole in the California Vehicle Code (CVC). The passage of AB 51 now formally adds lane-splitting as a condoned practice by the CVC; and more importantly, it expressly allows government agencies, like the California Highway Patrol, to create and teach best-practice guidelines. AB 51 still creates some basic jurisprudence issues, like granting legislative powers to the executive branch, but many in the pro-lane-splitting movement seem to look past that issue, instead focusing on what it brings to motorcyclists.

EPA Slaps Harley-Davidson with $12 Million Fine

The EPA DOJ have just come to a settlement agreement with Harley-Davidson, which sees the American motorcycle manufacturer agreeing to pay a $12 million fine for its Screamin Eagle “super tuner” devices. Also in the agreement, Harley-Davidson agrees to spend $3 million to mitigate air pollution (through a project to replace conventional woodstoves with cleaner-burning stoves in local communities), as well as to stop selling, buy back, or destroy any illegal devices that increase air pollution from the company’s motorcycles. While not quite the Dieselgate scandal that caught Volkswagen circumventing EPA emission standards, Harley-Davidson’s “super tuners” do provide an aftermarket solution for motorcyclists to circumvent the emission devices on their motorcycles.

Moto3: Sky VR46 Fires Romano Fenati

As expected, Romano Fenati has been formally released from his contract with the Sky VR46 team. The Italian was suspended from the team after an incident at the Red Bull Ring in Austria. That was a temporary measure, but it has now been made permanent. Fenati was released for behavioral issues. The Italian had been abusive towards members of the team, and had not behaved in a professional manner. The incident in Austria was just the latest in a long line of breaches of behavioral conduct, which included confirmed reports of verbal abuse and unconfirmed and unsubstantiated reports of physical conflict. The Sky VR46 team have announced that they will be bringing Lorenzo Dalla Porta in to join Andrea Migno and Nicolo Bulega in the Moto3 team.

Two New BMW R nineT Models Coming

Filings with the California Air Resources Board (CARB) suggest that BMW Motorrad has two more variations of its retro-styled motorcycle line coming to the USA: the BMW R nineT Pure and the BMW R nineT Racer. These two bikes would join the other two air-cooled models we have already seen from the Germans, the base model BMW R nineT and the recently released BMW R nineT Scrambler, which debuted at EICMA last year. Our friends at Motorcycle.com spotted the CARB filings, and believe one of the machines will be based off the BMW Lac Rose concept – an ADV throw-back to when the Dakar Rally actually raced to Dakar. The other model though, could be anyone’s guess, as BMW hasn’t dropped any other concepts or hints in the past months.

Q&A: KTM On-Road Technical Director Sebastian Risse – The Development of the KTM RC16 MotoGP Bike

Sebastian Risse is the man behind the KTM RC16 MotoGP bike which was presented on Saturday at the Red Bull Ring. An automotive engineer by training, Risse has been with KTM since 2008. He started out as a crew chief and chassis analyst on KTM’s now defunct RC8 Superbike project, but when KTM returned to Grand Prix racing in 2012, Risse took charge of the Moto3 project, which has gone on to be the benchmark in the class. Risse is currently head of all of KTM’s roadracing activities, and has overseen and led development of the RC16 MotoGP bike. After the KTM RC16 was presented, we spoke to Sebastian Risse about the differences and design choices which went into the bike.

Here’s a Custom Ducati XDiavel by Roland Sands Design

In the event’s 76-year history, this year marks the first time that Ducati has ever participated at the Sturgis Motorcycle Rally – the Italian company hoping to showcase its Harley-Davidson alternative, the Ducati XDiavel. Helping fuel that fire was a collaboration between Roland Sands Design and Ducati, which has given way to the creation of a one-off XDiavel with the usual RSD touches. This means a flowing single-piece body, the addition of a 19″ front wheel, and shotgun-style exhaust are added to the already stylish XDiavel. The RSD Ducati XDiavel is then finished off with metallic flake paint job, along with the usual bits and bobs from the RSD catalog. There is a lot of “Southern California” transmitted through RSD’s design into the Italian-born XDiavel.

2017 KTM RC16 Officially Debuts

The Austrian GP might be tomorrow, but today the news is all about MotoGP’s newest entrant, KTM Racing. The Austrian team used its home to debut officially its MotoGP program, showing the KTM RC16 MotoGP race bike in its officially Red Bull livery for next year. The livery itself is what you would expect between at KTM/Red Bull collaboration, with the same blue and orange paint scheme as can be found on the Red Bull KTM Moto3 squad. The big difference of course is the rumored fire-breathing, 270hp, V4, engine, which Bradley Smith and Pol Espargaro will attempt to tame. The bike’s next outing will be at Valencia, where Thomas Lüthi and Mika Kallio will ride with the MotoGP-regulars once again, competing as wild card entries.

MotoGP Considering Team Communication via Dashboards

Dorna is considering allowing communication between teams and riders via the dashboard. At a meeting today between Dorna and the teams, initial discussions took place over a system to allow teams to pass very brief messages to the dashboard of the bikes. The ability to pass messages between team and bike has been made possible thanks to the transponders currently being used in MotoGP. Those allow for a very limited and very short burst of communication as the bikes pass the timing loops at the track. Race Direction is currently using the system to pass signals to the dash in the case of a red flag, black flag or ride through penalty, but the system would also allow teams a limited ability to pass messages to the riders.

Norton Announces V4 Superbike, Again

A year ago, to the day, Norton announced that it was working on a street-going superbike that featured a 200hp, 1,200cc, V4 engine. Now, Norton confirms that news, saying that we will see the limited-production (200 units) machine later this fall. Yay. On the bright side, Norton posted a concept drawing of the new bike to its Facebook page, giving us at least something new to whet our appetites on the new motorcycle. The concept looks very similar to the sketch we saw last year, making today’s new a little bit about nothing. But, our friends at MotoFire report that Norton is still working on a 650cc project, which will debut later this year as well.

Is This the 2017 Yamaha YZF-R6?…Nope

Someone is trying to pass off the above photo as the eagerly awaited 2017 Yamaha YZF-R6 – unfortunately, it’s a fake. I’m actually surprised this piece of photoshop has some legs, and is making its way around the internet, considering how obvious the forgery. To verify its authenticity, all one would have to do is to compare the above photo with photos of the current generation Yamaha YZF-R1. Contrasting the two, it’s clear that the chassis and exposed parts of the engine are right off the Yamaha YZF-R1 (it’s easiest to see on the swingarm). The real smoking gun though is that the forger used a Yamaha press photo as their base. I was able to find the base photo, which clearly shows that the five-spoke wheels on the alleged R6 are in the exact same ones from a R1 press photo.

Confederate P51 Combat Fighter, Second Generation

08/20/2015 @ 3:15 pm, by Jensen Beeler36 COMMENTS

Confederate-P51-Combat-Fighter-Second-Generation-07

Confederate Motors is making some of the most intriguing and evocative custom motorcycles on the market right now, and the company’s second-generation Confederate P51 Combat Fighter is no different.

Taking some cues from the first-generation Fighter, as well as a couple nods from the Confederate X132 Hellcat, the Confederate G2 P51 Combat Fighter not only encapsulates everything good about the Confederate Motors brand, but it’s also Pierre Terblanche’s last work at the Southern company, before heading to Royal Enfield.

Confederate says that the G2 P51 Combat Fighter draws inspiration from the “1960’s rebel, anti-hero and the stripped, raw, chopper he rode.” The custom certainly is sinister in its look, especially in the blacked-out version. Oh, did we mention is boasts over 200hp at the rear wheel?

Like all Confederate machines, these P51 Combat Fighters will be bespoke to each owner, of which there will be only 61 units made. MSRP for the blonde model is is $113,900 (30 units in total), while the brunette will cost you $119,500 (31 units to be produced). More photos and details after the jump.

Confederate C2 P-51 Fighter — Pierre Terblanche’s Latest Motorcycling Creation

12/07/2013 @ 8:12 am, by Jensen Beeler34 COMMENTS

confederate-C2-P51-Fighter

It has been over two years since we saw a new motorcycle from Confederate Motors, but you would be wrong to think that the boutique Southern brand has been sitting idly by all this time.

Earlier this year, Confederate added esteemed motorcycle designer Pierre Terblanche to its ranks, and now we get to see the first fruition of the South African’s influence on the American motorcycle company.

Announcing today the Confederate C2 P-51 Fighter, Terblanche has created Confederate’s second-generation model of the Fighter line — no easy feat to build upon, as Terblanche calls the original fighter one of his all-time favorite motorcycle designs.