Report: Honda RC213V-S Priced at ¥20 Million

According to a report made by The Asahi Shimbun, Japan’s second largest daily newspaper, Honda has green-lit the RC213V-S project, with a price tag of 20 million yen — roughly $170,000 USD. The Honda RC213V-S debuted at the 2014 EICMA show, and was as advertised: a MotoGP race bike with lights and mirrors added to it. Honda teased show-goers and the media by say that the RC213V-S model was only a prototype, adding more fuel to the speculation regarding whether the Japanese firm would actually produce the long-awaited model. Since its inception, price figures have been rumored and banded about, almost all of which were in the six-figure category.

Polaris Acquires Electric Motorcycle Business from Brammo

Polaris Industries has acquired the electric motorcycle business from Brammo, Inc. Polaris is also acting as a leading investor in the recapitalization of Brammo, which will enable Brammo to focus exclusively on the design, development, and integration of electric vehicle powertrains. This means that Polaris will takeover building electric motorcycles at its Spirit Lake, IA production facility, and that Brammo will continue developing EV powertrains for Polaris and other OEM partners. According to its press release, Polaris will start production of electric motorcycles in the second half of 2015.

Ducati Sets Sales Record for 2014 – 45,100 Bikes Sold

Ducati Motor Holding is reporting another record sales year, and that the Italian motorcycle manufacturer sold 45,100 bikes in 2014. This marks the fifth year in a row that Ducati has shown sales growth, and it’s the third year in a row that the sales figures have been an all-time record for the Italian brand. Sales for 2014 were up 2% over 2013, with the USA again leading as Ducati’s most important market (8,804 units sold in the USA). Unsurprisingly, the Asian market is growing quickly for Ducati as well, up 11% in 2014. Ducati attributes its sales growth in-part to its new water cooler Monster line, where the Ducati Monster 1200 and Ducati Monster 821 helped raise Monster sales by 31%, with 16,409 new bikes sold in 2014.

Newspeak: The Advent of the “Adventure-Sport”

In the past decade the ADV segment has been a confusing amalgamation of differing interests, and over that time-period, two distinct groups have boiled to the surface. First there are the “Long Way Round” hopefuls, who invariably own a BMW R1200GS/A, and seem to be on some sort of perpetual preparation for an African safari. More recently, a second group has appeared: those riders who look to these big ADV bikes as more versatile Sport-Touring machines. All these riders, and their bikes, have been wedged into a single “Adventure” category, and it has created a bit of confusion for the segment. So, I want to introduce the concept of the “Adventure-Sport” and how it differentiates from the previous “Adventure-Touring” category.

MotoGP: Ducati’s Desmosedici GP15 Officially Delayed

As had been widely expected, Ducati will not have the GP15 ready for the first test at Sepang, in early February. In an interview with the MotoGP.com website, due to be shown on 19th January, Ducati Corse boss confirmed that work was still underway on the all-new bike; and that instead, Ducati will be bringing an uprated version of last year’s bike, dubbed the GP14.3, to test aspects of the new design not requiring the new engine. The delays have been trailed by both Dall’Igna and Paolo Ciabatti, speaking to the media at the Valencia test and at the Superprestigio dirt track event in December. The GP15 is a completely new bike, designed from the ground up, with a completely redesigned engine.

1972 Honda CB500, 3D Printed to Life Size

We’ve talked a bit before about the virtues of 3D printing, and how this increasingly affordable technology could change the consumer landscape as far as how we buy basic parts in the motorcycle industry. For as practical as how 3D printing, or rapid prototyping, can be, it can also be beautiful and used for art. This story is sort of a merger of those two ideas. Jonathan Brand has hoped to buy a 1972 Honda CB500 motorcycle, but the birth of his son changed that plan. Where there is a will though, there is a way, and Brand came up with the next best thing — he built a life-size model of a CB500 with his 3D printer.

Mercedes CEO: No Further Acquisition of MV Agusta

Italians are rejoicing over the news that Mercedes-Benz CEO Dieter Zetsche has made it clear that the German car manufacturer is not interested in acquiring more of MV Agusta’s private stock. Loyal readers will remember that Mercedes-AMG purchased 25% of MV Agusta last October, for a rumored €30 million — echoing the move Audi made in Ducati. Talking at the North American International Auto Show in Detroit though, Zetsche said “however, to avoid what happened with Ducati we point out that we have no intention to take over the business or produce motorcycles. MV Agusta can do it better than us.”

Triumph Has Its Best Sales Year Since Its Rebirth

Good news for Triumph Motorcycles fans, as the British motorcycle marque is reporting a banner year for 2014 — with 54,432 units sold worldwide. That figure is up 4% over 2013’s sales figure of 52,089 units, which was the first time that Triumph broke the 50,000 unit mark since the company’s rebirth in 1984. Helping Triumph reach this new high-water mark was the company’s home market, where Triumph accounted for one-in-five motorcycles sold in the UK (over 500cc). Overall, Triumph saw 8% growth in the UK, as modest growth considering the British market was up roughly 10% last year. The news is not all good, however. Triumph previously reported that financial figures for the first-half of 2014 were down, with revenue down £364 million from £369 million, and net income at a loss of £8 million.

Husqvarna 401 Concepts Will Be 2017 Production Models

One of the more intriguing things to come out of the 2014 EICMA motorcycle show in Milan were Husqvarna’s two “401” concepts, the Vitpilen and Svartpilen. The café-styled bikes are based off the KTM 390 Duke platform, though you wouldn’t know it from looking at them. Husqvarna said at EICMA that if there was sufficient interest, the Vitpilen and Svartpilen could go into production. With an overwhelming critical response from the press and fans, it should come no surprise then that our friends at Bike.se are reporting that Husqvarna intends to make the small-displacement machines a part of its 2017 model lineup.

Ducati Desmosedici Cucciolo Concept by Alex Garoli

Imagine if you will that the first Ducati, the Ducati Cucciolo, and the most modern Ducati, the Ducati Desmosedici, had a child — what would it look like? That far-fetched question nagged Mexican designer Alex Garoli, so he decided to build a concept of the machine. At the core of the Ducati Desmosedici Cucciolo is the V4 powerplant of Italy’s MotoGP race bike, and around it Garoli has imagined a modern steel trellis frame that mimics the bicycle frame look of the post-WWII motorized bicycles that pulled Italy out of deep recession. Of course the most interesting thing about Garoli’s concept is the fact that it’s a ~12:1 scale model. The work is pretty exquisite, even if you don’t agree with the concept’s ethos.

Watch Graves Yamaha Put the New R1 Through Its Paces

01/05/2015 @ 9:54 pm, by Jensen Beeler8 COMMENTS

2015-Yamaha-YZF-R1M-19

Short and simple here. MotoAmerica’s Monster Energy Graves Yamaha team got their hands on a stock 2015 Yamaha YZF-R1, and decided to give their rider Cameron Beaubier a go at it on the Chuckwalla Valley Raceway.

The bike is mostly stock, save for a few Graves improvements, and we get one of our first glimpses of the new R1 on the race track. Enjoy!

Following Fillmore – Episode 3: Riding for Rocco

04/04/2013 @ 3:03 pm, by Jensen Beeler4 COMMENTS

following-fillmore-episode-3

Episode 3 of Following Fillmore finds us out in the California desert, as Chris takes part in a track day to benefit paralyzed road racer Rocco Horvath. Joining Fillmore at Chuckwalla Valley Raceway are some familiar AMA paddock names like Jason Pridmore, Josh Hayes, Melissa Paris, James Rispoli, and Benny Solis. If you are wondering what professional riders do in their spare time, here is your chance.

I have to say, in the three episodes we have shown so far of Following Fillmore (click to watch Episode 1 & Episode 2), this latest installment has to be a staff favorite here at A&R. Not only do we get a real human moment from Chris towards the end of the video, but we get to see his rationalization on the inevitability of crashing and possibly getting seriously hurt from the sport he loves. Something to chew on — good stuff.

Listen to Attack Kawasaki’s Crossplane CRT Bike

02/01/2013 @ 10:52 am, by Jensen Beeler36 COMMENTS

crossplane-crankshaft

The 2013 MotoGP Championship season is rapidly approaching us, and while many of the teams are now making their way to Sepang, Malaysia for their first test since the winter ban period, Attack Kawasaki and rider Blake Young were out in the California desert, putting laps in on Rich Stanboli’s new crossplane-enginged Kawasaki CRT bike at Chuckwalla Valley Raceway.

Only time will tell on how Attack’s racing package performs at its three MotoGP wildcard events (Austin, Laguna Seca, and Indianapolis), but so far the project is music to our ears. The only Kawasaki with a crossplane crankshaft that we can think of, enjoy the video posted by RM Racing after the jump. And remember, it’s Friday, so no one at work would judge you if you bumped up the speakers.

Video: Lightning Electric Superbike vs. BMW S1000RR

02/29/2012 @ 11:01 am, by Jensen Beeler12 COMMENTS

On Monday, we got a chance to swing a leg over the Lightning Motorcycles electric superbike at Infineon Raceway. While a full review is till to come, the initial report is basically that Lightning’s bike pulls like a freight train when you get on the throttle, and despite how “big” it is, the electric superbike handles surprisingly well, even around the crucible that is Sears Point Infineon Raceway. During our test, Lightning Motorcycles’ Richard Hatfield tipped us off to a video with Ted Rich at the helm of the Lightning, with AMA Superbike rider Jake Holden giving chase (and video) on his BMW S1000RR race bike.

Lapping around Chuckwalla Valley Raceway, Holden and his BMW look like they could have gotten past the Lightning in several spots, though Rich and the Lightning certainly hold their own in the video. The Lightning’s straight-line speed is more than evident, as it pulls away from the 200+hp BMW S1000RR with ease, and as we experienced at Infineon, the bike is now slouch in the turns, and continues to develop in advance of the electric motorcycle racing season. Check out the video after the jump.