Report: Honda RC213V-S Priced at ¥20 Million

According to a report made by The Asahi Shimbun, Japan’s second largest daily newspaper, Honda has green-lit the RC213V-S project, with a price tag of 20 million yen — roughly $170,000 USD. The Honda RC213V-S debuted at the 2014 EICMA show, and was as advertised: a MotoGP race bike with lights and mirrors added to it. Honda teased show-goers and the media by say that the RC213V-S model was only a prototype, adding more fuel to the speculation regarding whether the Japanese firm would actually produce the long-awaited model. Since its inception, price figures have been rumored and banded about, almost all of which were in the six-figure category.

Polaris Acquires Electric Motorcycle Business from Brammo

Polaris Industries has acquired the electric motorcycle business from Brammo, Inc. Polaris is also acting as a leading investor in the recapitalization of Brammo, which will enable Brammo to focus exclusively on the design, development, and integration of electric vehicle powertrains. This means that Polaris will takeover building electric motorcycles at its Spirit Lake, IA production facility, and that Brammo will continue developing EV powertrains for Polaris and other OEM partners. According to its press release, Polaris will start production of electric motorcycles in the second half of 2015.

Ducati Sets Sales Record for 2014 – 45,100 Bikes Sold

Ducati Motor Holding is reporting another record sales year, and that the Italian motorcycle manufacturer sold 45,100 bikes in 2014. This marks the fifth year in a row that Ducati has shown sales growth, and it’s the third year in a row that the sales figures have been an all-time record for the Italian brand. Sales for 2014 were up 2% over 2013, with the USA again leading as Ducati’s most important market (8,804 units sold in the USA). Unsurprisingly, the Asian market is growing quickly for Ducati as well, up 11% in 2014. Ducati attributes its sales growth in-part to its new water cooler Monster line, where the Ducati Monster 1200 and Ducati Monster 821 helped raise Monster sales by 31%, with 16,409 new bikes sold in 2014.

Newspeak: The Advent of the “Adventure-Sport”

In the past decade the ADV segment has been a confusing amalgamation of differing interests, and over that time-period, two distinct groups have boiled to the surface. First there are the “Long Way Round” hopefuls, who invariably own a BMW R1200GS/A, and seem to be on some sort of perpetual preparation for an African safari. More recently, a second group has appeared: those riders who look to these big ADV bikes as more versatile Sport-Touring machines. All these riders, and their bikes, have been wedged into a single “Adventure” category, and it has created a bit of confusion for the segment. So, I want to introduce the concept of the “Adventure-Sport” and how it differentiates from the previous “Adventure-Touring” category.

MotoGP: Ducati’s Desmosedici GP15 Officially Delayed

As had been widely expected, Ducati will not have the GP15 ready for the first test at Sepang, in early February. In an interview with the MotoGP.com website, due to be shown on 19th January, Ducati Corse boss confirmed that work was still underway on the all-new bike; and that instead, Ducati will be bringing an uprated version of last year’s bike, dubbed the GP14.3, to test aspects of the new design not requiring the new engine. The delays have been trailed by both Dall’Igna and Paolo Ciabatti, speaking to the media at the Valencia test and at the Superprestigio dirt track event in December. The GP15 is a completely new bike, designed from the ground up, with a completely redesigned engine.

1972 Honda CB500, 3D Printed to Life Size

We’ve talked a bit before about the virtues of 3D printing, and how this increasingly affordable technology could change the consumer landscape as far as how we buy basic parts in the motorcycle industry. For as practical as how 3D printing, or rapid prototyping, can be, it can also be beautiful and used for art. This story is sort of a merger of those two ideas. Jonathan Brand has hoped to buy a 1972 Honda CB500 motorcycle, but the birth of his son changed that plan. Where there is a will though, there is a way, and Brand came up with the next best thing — he built a life-size model of a CB500 with his 3D printer.

Mercedes CEO: No Further Acquisition of MV Agusta

Italians are rejoicing over the news that Mercedes-Benz CEO Dieter Zetsche has made it clear that the German car manufacturer is not interested in acquiring more of MV Agusta’s private stock. Loyal readers will remember that Mercedes-AMG purchased 25% of MV Agusta last October, for a rumored €30 million — echoing the move Audi made in Ducati. Talking at the North American International Auto Show in Detroit though, Zetsche said “however, to avoid what happened with Ducati we point out that we have no intention to take over the business or produce motorcycles. MV Agusta can do it better than us.”

Triumph Has Its Best Sales Year Since Its Rebirth

Good news for Triumph Motorcycles fans, as the British motorcycle marque is reporting a banner year for 2014 — with 54,432 units sold worldwide. That figure is up 4% over 2013’s sales figure of 52,089 units, which was the first time that Triumph broke the 50,000 unit mark since the company’s rebirth in 1984. Helping Triumph reach this new high-water mark was the company’s home market, where Triumph accounted for one-in-five motorcycles sold in the UK (over 500cc). Overall, Triumph saw 8% growth in the UK, as modest growth considering the British market was up roughly 10% last year. The news is not all good, however. Triumph previously reported that financial figures for the first-half of 2014 were down, with revenue down £364 million from £369 million, and net income at a loss of £8 million.

Husqvarna 401 Concepts Will Be 2017 Production Models

One of the more intriguing things to come out of the 2014 EICMA motorcycle show in Milan were Husqvarna’s two “401” concepts, the Vitpilen and Svartpilen. The café-styled bikes are based off the KTM 390 Duke platform, though you wouldn’t know it from looking at them. Husqvarna said at EICMA that if there was sufficient interest, the Vitpilen and Svartpilen could go into production. With an overwhelming critical response from the press and fans, it should come no surprise then that our friends at Bike.se are reporting that Husqvarna intends to make the small-displacement machines a part of its 2017 model lineup.

Ducati Desmosedici Cucciolo Concept by Alex Garoli

Imagine if you will that the first Ducati, the Ducati Cucciolo, and the most modern Ducati, the Ducati Desmosedici, had a child — what would it look like? That far-fetched question nagged Mexican designer Alex Garoli, so he decided to build a concept of the machine. At the core of the Ducati Desmosedici Cucciolo is the V4 powerplant of Italy’s MotoGP race bike, and around it Garoli has imagined a modern steel trellis frame that mimics the bicycle frame look of the post-WWII motorized bicycles that pulled Italy out of deep recession. Of course the most interesting thing about Garoli’s concept is the fact that it’s a ~12:1 scale model. The work is pretty exquisite, even if you don’t agree with the concept’s ethos.

2013 Honda CB500X – Eats Potholes on a Budget

11/12/2012 @ 1:59 am, by Jensen BeelerComments Off

If you haven’t caught on yet, American Honda has announced a trio of 500cc machines, just ahead of the upcoming EICMA show. Featuring the fully-faired 2013 Honda CBR500R sport bike, and its fairing-less sibling the 2013 Honda CB500F, the slightly taller 2013 Honda CB500X completes the trifecta, and adds an adventure-esque dimension to Honda’s midrange options.

Like the Honda CBR500R & Honda CB500F, the Honda CB500X uses the same modest liquid-cooled, fuel-injected, DOHC, 180° crank, parallel-twin motor that will put down 54hp at the wheel for the US market (tiered-license countries will see a 47hp machine).

A slight variation on the chassis that is shared with the other 500cc machines, the CB500X has a bit more travel to its suspension (5.5″ on the front forks), and the seat height is a full inch higher (31.9″ to be precise). Visually the philosophically similar to the Honda NC700X, the Honda CB500X is also a tad heavier than its relatives, sporting 430 lbs of fully-fuel heft at the curb, which is likely due to its larger 4.5 gallon tank (4.1 gallons on the other models).

Building three motorcycles from one versatile core design, American Honda has some aggressive prices on the CBR500R & CB500F, but the American subsidiary of the Japanese brand has yet to release a price on the CB500x. We would expect something in the $5,000 range though when it hits dealer floors in July 2013, with the ABS version getting a $500 price increase over the base model. Full technical specifications are after the jump.

First Official Shots of the 2013 Honda CBR500

11/11/2012 @ 4:53 am, by Jensen Beeler9 COMMENTS

We are still a few days away from the official unveiling of Honda’s 500cc line-up, which will include the 2013 Honda CBR500, 2013 Honda CB500R, and 2013 Honda CB500X motorcycles. Based around a 469cc parallel-twin motor, Honda’s new mid-range bikes are for the budget-oriented rider, and produced a modest 54 hp in their non-restricted state for tiered-licensed countries (47hp in restricted form).

Expected to be the big new thing from Honda at EICMA, we have seen quite a bit already on the Honda CBR500 and its siblings ahead of their debut at the trade show in Milan, Italy. The Honda CBR500 is the logical progression of the Honda CBR250R, which is a budget-focused single-cylinder sport bike that’s available worldwide, including the US.

We’ll have to wait and see which of the 500cc machines American Honda brings to the USA, but the CBR500 is heavily expected to come to both the American and Canadian markets. Time will tell as to whether the Honda CB500R (not likely) and Honda CB500X (more likely) come to North America as well. Photos after the jump.

Spotted: Honda CBR500, Honda CB500R & Honda CB500X

10/25/2012 @ 4:00 pm, by Jensen Beeler17 COMMENTS

Honda is set to debut a number of 500cc machines at EICMA next month, two of which we have already glimpsed: the Honda CBR500 & Honda CB500R. Joining the smaller sport bike and street-naked is is the Honda CB500X, a 500cc version of the Honda NC700X.

Spotted all together at an Italian commercial shoot, all three models are said to share a 500cc parallel-twin motor that makes 45hp, as well as the same basic chassis.

Fitted with “traditional” telescopic forks, single brake discs up front, and all three models sharing a bevy of major parts, Honda should be able to be very aggressive with its pricing structure on the new 500cc model line.

Looking at the components as well, it is clear that Honda intends its new CBR500, CB500R, and CB500X motorcycles to be priced at the lower end of the pricing spectrum, making them attractive to newer and price-sensitive motorcyclists — especially our friends across the pond who are riding with an A2 license.