2010 MV Agusta F4 Breaks Cover at EICMA

11/09/2009 @ 6:14 pm, by Jensen Beeler8 COMMENTS

2010 MV Agusta F4 Breaks Cover at EICMA 2010 mv agusta f4 6 560x373

The 2010 MV Agusta F4 has been hyped extensively by MV, but after seeing the Brutale release, we were skeptical about what the new F4 would bring. Expectedly, the 2010 MV Agusta F4 is based of Massimo Tamburini’s iconic design, and is updated to fit more with modern tastes. But MV has also changed the bike underneath the hood. More on that, photos, and technical specifications after the jump.

With a 998cc motor, the new F4 makes 3hp more than the comparably displaced 2009 MV Agusta R 312. The 2010 F4 also weights less, dropping 22lbs for a dry weight of 424lbs.

Like the Brutale, a new engine, chassis, and swingarm have been designed for the 2010 model. These changes make the 2010 MV Agusta F4 4cm narrower, while making the chassis more rigid.

Riders should find the new chassis more comfortable, and will be able to make use of the F4’s new 8-way adjustable traction control unit and twin-map ECU. Helping get the power to the ground is bike’s

Other changes include:

  • Power supply with TSS variable length intake system
  • TC MK II traction control system, adjustable on 8 levels
  • Two injectors per cylinder
  • New electronic injection system with 49-mm throttle bodies
  • New Magneti Marelli 7 SM ECU
  • New 4-1 exhaust system with valve

2010 MV AGUSTA F4 1000 R Technical Specs:

ENGINE

Type Four cylinder, 4 stroke, 16 valve
Timing system “D.O.H.C”, radial valve
Total displacement 998 cm3 (60.9 cu. in.)
Compression ratio 13.1:1
Starting Electric
Bore x stroke 76 mm x 55 mm (3.0 in. x 2.2 in.)
Max. horse power – r.p.m. (at the crankshaft) Full power version: 137 kW (186 HP) at 12900 – Lim. 13500 r.p.m. / Restricted power version: 73 kW (100 HP) at 9200 – Lim. 10800 r.p.m.
Max. torque – r.p.m. Full power version: 114 Nm (11.4 kgm) at 9500 r.p.m. / Restricted power version: 90 Nm (9.0 kgm) at 5500 r.p.m.
Cooling system Cooling with separated liquid and oil radiators
Engine management system Magneti Marelli IAW 7BM ignition – injection integrated system with Mikuni throttle body; induction discharge electronic ignition;
Sequential timed “Multipoint” electronic injection ; Variable height intake ducts with Torque Shift System (TSS)
Clutch Wet, multi – disc
Gear Box Cassette gearbox; six speed, constant mesh
Primary drive 50/79
Gear ratio
First gear: Speed* 13/38 128,2 km/h (79.6 mph) a t 1 3 5 0 0 r. p . m .
Second gear: Speed* 16/34 176,4 km/h (109.5 mph) a t 1 3 5 0 0 r. p . m .
Third gear: Speed* 18/32 210,8 km/h (130.9 mph) at 1 3 5 0 0 r. p . m .
Fourth gear: Speed* 20/30 249,8 km/h (155.1 mph) at 1 3 5 0 0 r. p . m .
Fifth gear: Speed* 22/29 284,3 km/h (176.5 mph) a t 1 3 5 0 0 r. p . m .
Sixth gear: Speed* 19/23 305,0 km/h (189.4 mph) at 1 3 5 0 0 r. p . m .
Final velocity ratio 15×41

ELECTRICAL EQUIPMENT
Voltage 12 V
Alternator 350 W at 5000 r. p . m .
Battery 12 V – 8,6 Ah
DIMENSIONS AND WEIGHT
Wheelbase 1430 mm (56.27 in.)
Overall lenght 2100 mm (82.63 in.)
Overall width 750 mm (29.51 in.)
Saddle height 860 mm (33.84 in.)
Min. ground clearance 115 mm (4.52 in.)
Trail 100,4 mm (3.93 in.)
Dry weight 192 Kg (423 lbs.)
Fuel tank capacity 17 l (4.49 U.S. gal.)

PERFORMANCE
Maximum speed* Full power version: 305,0 km/h (189.4 mph) / Restricted power version: 249,0 km/h (154.6 mph)

FRAME
Type CrMo Steel tubular trellis (TIG welded)
Rear swing arm pivot plates: material Aluminium alloy

FRONT SUSPENSION
Type “UPSIDE – DOWN” telescopic hydraulic fork with rebound-compression damping and spring preload external and separate adjustment
Rod dia. 50 mm (1.97 in.)
Travel on leg axis 120 mm (4.72 in.)

REAR SUSPENSION
Type Progressive, single shock absorber with rebound and compression (High speed / Low speed) damping and spring preload adjustment
Single sided swing arm: material Aluminium alloy
Wheel travel 120 mm (4.72 in.)

BRAKE
Front brake Double floating disc with Ø 320 mm (Ø 12.6 in.) diameter, with steel braking band and aluminium flange
Front brake caliper Radial-type, single-piece with 4 pistons – Ø 34 mm (Ø 1.34 in.)
Rear brake Single steel disc with Ø 210 mm (Ø 8.27 in.) diameter
Rear brake caliper With 4 pistons – Ø 25,4 mm (Ø 1.00 in.)
RIM
Front: Material / size Aluminium alloy 3,50 ” x 17 ”
Rear: Material / size Aluminium alloy 6,00 ” x 17 ”
TYRES
Front 120/70 – ZR 17 M/C (58 W)
Rear 190/55 – ZR 17 M/C (75 W)
FAIRING
Material Thermoplastic

* = Top speed attained on closed course. Rev. 1 – 27/10/09
MV Agusta is committed to the constant improvement of our products. Therefore the information and technical characteristics of the vehicles are subject to change without notice.

Comment:

  1. Billy B says:

    in terms of mechanics, suppose it sounds good….but a big backwards step with the design. Luck that, now i don’t have to feel so bad i can’t afford it…

  2. snacktastic says:

    I don’t think they took a step in any direction at all, it looks the same as the old bike.

  3. Jake says:

    I’m not really crazy about the changes to front and the square pipe, but I like the rest of the updates and love the return to the 5 star wheel design. Most importantly as I’ve said before they’ve at least tried to do something about the weight. Secondly all those cutouts should help the bike run cooler because they’ve always run hot. Glad they finally got off the more CCs is better thing and went back to 998cc and just looked to make a better over all motor, but have to wait to see the verdict on the fueling.

    If there is a single seater model and the ability to completely turn off or disable the traction control I’d really consider going back to the MV camp instead of getting a 1198

  4. Patron says:

    Pretty bike. Not sure why some bikes even bother having a pillion seat. Chances are if you have the cash for an F4, you could have another bike for two up. A revised tail section would be nice but still a nice bike. Looks best in graphite w the red trellis frame.

  5. draysse says:

    Massimo Tamburini has been the north star of motorcycle design for decades, his designs from the iconic Ducati 916 to the original F4 have pointed the way forward for all of motorcycle design. The new F4 is nice but that’s it, nothing new or innovative to talk about. I can only hope & dream that Massimo brings his immense talents to bare on something new, because frankly everyone in the industry is regurgitating design cues he pioneered years ago. I had high hopes for his new ideas with Harley money behind them, guess I’ll have to continue waiting…..

  6. max says:

    Still looks just as pretty as before. And as before the matt black variant will be the most desirable!

  7. Nathanel says:

    It looks like it`s doin’ 200 just sitin’ there.