Some Thoughts on MV Agusta & A Story About Two Letters

MV Agusta USA recently invited a slew of journalists down to Fontana, California in order to talk about the company’s new business plan, and to ride its current lineup of motorcycles on the infield course. This article is “Part 1″ of that experience, as I wanted to separate my thoughts on MV Agusta, MV Agusta USA, and the general motorcycling climate into one story, and then have my “not-a-review” of the machines for another article. Got it? Ok, let’s go. It is probably easiest to start with where MV Agusta is as a company. MV Agusta has a started a new three-year business plan, which sees the company pushing into a full-range of motorcycles, pushing outside of its Italian boundaries, and pushing out of the “luxury” brand segment.

Photos: Ducati Desmosedici GP15

The Ducati Desmosedici GP15 is a machine that has been long in the making. It represents Gigi Dall’Igna’s next step forward for the wayward Ducati Corse MotoGP team, and it is the dubious honor of holding the hopes of Ducati fans around the world, who see the machine as the silver bullet that will return Ducati to the forefront of racing prowess — no pressure. The most obvious change that can be seen on the GP15 is the re-routing of the exhaust, with the undertail pipes collecting on the right-hand side of the machine, rather than coming in from both sides and meeting in the middle. Can you spot any other changes in the high-resolution photos after the jump? Let us know in the comments.

Politics & Corruption: Why There Isn’t a Race in Indonesia

If anyone needed any further proof that Indonesia is important to the Japanese motorcycle manufacturers, the fact the Repsol Honda team chose Bali as the location to launch their 2015 MotoGP project should remove any doubt. But if Indonesia is so important to the manufacturers, and to MotoGP, why is there not a race there? Over the course of the MotoGP test at Sepang, I had a few conversations with people on the subject. On the record, the story was always the same: we need a suitable track, and as soon as one exists we will be happy to go there. Off the record, however, they were much less optimistic.

A Requiem for Kenji Ekuan & The Kando of GK Design

Industrial design is not a commonly known, much less well understood, profession. To some it suggests arranging equipment inside factories, to others it means some kind of product engineering. In reality it is the search for, and expression of, human satisfaction in inanimate objects that are mass produced. That’s quite a mouthful, and to the average person it may sound like jiberish written for some pretentious coffee table book, but it is the truth. At least, it is one version of the truth as seen by the GK Design Group of Tokyo, Japan. If you ride motorcycles, then you are intimately familiar with the work of this large and internationally respected studio. Since only its second production bike, the indigenously designed YA-1, every Yamaha motorcycle since 1958 has been crafted by GK.

Are You The MV Agusta F4 RC?

What look to be official photos of the MV Agusta F4 RC have leaked out onto the internet, along with a slide from MV Agusta’s media presentation on the machine. The photos give us our first glimpse into Varese’s homologation special, complete with a special two-can exhaust by Termignoni. The leaked slide confirms some of the numbers being thrown around about the F4 RC, namely that it will have 212hp, 81.86 lbs•ft of torque, weigh 175kg dry, and cost €36,900 (we already know that the MV Agusta F4 RC will cost $46,000 in the USA). Information from a leaked slide last year has already told us that MV Agusta has radically overhauled the F4 RC’s engine, designing a new cylinder heard, new crankshaft, new camshaft, as well as adding bigger fuel injectors, lighter pistons, and titanium connecting rods.

Kenji Ekuan, Designer of the Yamaha VMAX Has Died

Mainstream news is mourning the death of Kenji Ekuan today, as the 85-year-old Japanese industrial designer is one of the most influential artists in Japan’s modern era, and is most well-known for his designing of the iconic Kikkoman soy sauce bottle. Ekuan’s lesser-known works though include a number of motorcycle designs for Yamaha, including the now 30-year-old Yamaha VMAX motorcycle, which makes his passing even more meaningful to motorcyclists around the world. Kenji Ekuan founded GK Industrial Design after WWII, and his company helped shape the way Japan rebuilt itself after the world war.

Ride Review: KTM 1290 Super Adventure

Despite its huge dimensions, not to mention a 30 liter fuel tank, the 2015 KTM 1290 Super Adventure never looks big or bulky. In fact, it is only when you mount the hard luggage that you can tell this bike can really cover long distances. Apart from a dorky little exposed wire from the heated grips near the throttle, the fit and finish is very high-end, especially the integrated curved lighting in the tank — it is quite a sight. At first glance the Super Adventure doesn’t have the massive personality and stance of its German rival, the BMW R1200GS Adventure, but that is in part due to the white color scheme and the absence of the typical beak as a front mudguard. KTM is going about things differently, and that is something that appeals to many riders…including us.

Yamaha VMAX Carbon – Celebrating 30 Years of VMAX

It is hard to believe that the venerable Yamaha VMAX has been around for 30 years (it is even harder to believe that the VMAX has only seen one design revision in that timeframe as well), and so Yamaha is bringing out a special edition model to celebrate this special motorcycle. The 2015 Yamaha VMAX Carbon is exactly as the name implies: a VMAX drag bike laden with lightweight carbon fiber. In total, the VMAX Carbon’s tank cover, front and rear fenders, and side covers are all made from carbon fiber. Yamaha has teamed up with Akrapovic as well, and as such the Slovenian company’s slip-on mufflers complete the exhaust system and the changes to this beastly drag bike.

LEAKED: Here is the 2016 Indian Chief Dark Horse

Cruisers aren’t really our forté, here at Asphalt & Rubber, but breaking stories is…so, without all the typical fanfare, we bring you the first full photos of the upcoming 2016 Indian Chief Dark Horse. The Stead is murdered out and visually appealing, with black engine covers, black fenders, black forks…hell, even the tires are black. Under the hood is Indian’s Thunder Stroke 111 engine, which is an air-cooled 1,811cc v-twin good for 73hp and 100 lbs•ft.More technical features include ABS as standard, a keyless ignition system, cast wheels, and a solo seat. Our Bothan Spies suggest an MSRP of $17,000, and more accessories (all black, natch) than you can fit into the belly of a Tauntaun. Expect to see the Indian Chief Dark Horse launch officially on February 13th elsewhere.

Washington State Weighs Pro Lane-Splitting Law

The Washington State Legislature has a pro lane-splitting bill on its 2015-2016 docket, HB 1515. The law is moderately written, adopting a 10 mph speed differential between the motorcycle and traffic, with a 35 mph speed cap, as acceptable during lane-splitting activities. Loyal Asphalt & Rubber readers will recognize these provisions as being more restrictive than the California Highway Patrol’s now defunct guidelines. Lane-splitting is a near-and-dear topic to us here at A&R, as we believe a national effort to legalize the practice should be mission #1 for the American Motorcyclist Association.

Yamaha YZF-R1M Gets Homologated by the FIM

02/16/2015 @ 12:01 pm, by Jensen Beeler34 COMMENTS

2015-Yamaha-YZF-R1M-19

It is something that we have expected ever since we heard of Yamaha’s intent to bring two different variations of R1 to market, so it should come as no surprise then that the Yamaha YZF-R1M has been homologated by the FIM for use in the Superbike & Superstock 1000 classes.

Actually both flavors of R1 have been given the nod by the FIM, though we know that if given the choice, teams will choose to develop the YZF-R1M over the base model, especially as it comes with upgraded suspension pieces and carbon fiber fairings.

Aprilia USA Confirms Official Entry in MotoAmerica

02/02/2015 @ 10:48 am, by Jensen Beeler18 COMMENTS

2015-Aprilia-RSV4-RF-01

Aprilia USA will be part of MotoAmerica’s inaugural season, as the US subsidiary of the Italian brand confirmed an officially supported entry into the MotoAmerica Superstock 1000 class.

To go racing, Aprilia has partnered with HSBK Racing to form the “Aprilia HSBK Racing” team, which will campaign a two-rider lineup on the 2015 Aprilia RSV4 Factory superbike. The names of the riders have not been released as of yet.

MotoAmerica Announces Its 2015 Class Structure

10/03/2014 @ 3:20 pm, by David Emmett17 COMMENTS

motoamerica-logo

MotoAmerica, the organization which replaces the DMG in running the US AMA series, has given their first peek into the future, by announcing the rules package. Though still not finalized, the package does give a very clear indication of MotoAmerica and KRAVE’s thinking, and the direction they wish to steer motorcycle racing in America in.

Four classes have been announced, with two more currently being weighed. The series will feature two superbike classes, Superbike and Superstock 1000, which will run concurrently. There will also be two middleweight classes, Supersport and Superstock 600, which replace Daytona Sportbike and the Supersport series.

For the moment, the four classes will be very similar to the classes they replace, with the exception of Superstock 1000, which will be run along the same lines as the FIM Superstock 1000.

However, MotoAmerica make it very clear in their press release that the eventual goal is to bring the Superbike, Supersport, and Superstock 600 rules used at the world championship level, with the aim of bringing more American talent to world championship racing.

World Superbike Updates Its 2012 Provisional Calendar

10/13/2011 @ 3:45 pm, by Jensen Beeler1 COMMENT

World Superbike has released presumably its final revision to the Provisional World Superbike Championship Calendar (still with us here?). Announcing that Portimão will now be the penultimate round on the calendar, the Portuguese Circuit has been moved up to earlier in the year, and now makes Magny-Cours the production series’s final stop. Other changes include confirming Imola as the series’s second stop, which comes as no surprise to us.

What is surprising though is that this latest updated schedule by Infront and the FIM shows that the round originally scheduled for March 4th, rumored to be at Sepang, has been sacked. Originially intended to help World Superbike breakout from its Euro-centric schedule, the loss of a possible round in Malaysia certainly is a blow to the series in that regard, though there is some consolation in the fact that a round will be held in Russia, at the Moscow International Raceway. Check out the calendar after the jump.

World Superbike Looking for 2013-2015 Tire Supplier

03/31/2011 @ 10:36 am, by Jensen Beeler4 COMMENTS

There’s a growing rumor (if not fact) that Pirelli won’t be supplying the World Superbike Championship with tires after the 2012 season, and a piece of that puzzle has come forth today as Infront Motor Sports (IMS) has announced that it will be accepting bids from tire manufacturers to exclusively supply the World Superbike & World Supersport Championships, the Superstock 1000 FIM Cup, and the Superstock 600 European Championship for the 2013-2015 racing seasons.

BMW S1000RR Superstock Limited Edition

02/23/2011 @ 2:33 pm, by Jensen Beeler5 COMMENTS

To help celebrate Ayrton Badovini’s complete domination of the 2010 FIM Superstock 1000 Championship (the Italian won nine out of the ten races, finishing second only in the tenth race), BMW Italia is releasing a limited edition BMW S1000RR street version of the winning superstock bike.

With only 50 units being made, and available only in Italy, lucky owners will get the already potent S1000RR, along with a bevy of aftermarket goodies like a Akrapovic “Racing Exhaust” (pictures show a slip-on though), Gilles Tooling rearsets and levers, carbon fiber panels, LED turn signals, and of course BMW Italia’s racing colors.