Officially Official: MV Agusta Brutale Dragster 800 RR

We already brought you the first high-resolution photos of the MV Agusta Brutale Dragster 800 RR (say that three times fast!) yesterday, which were sent to us by our Bothan Spies. In response, MV Agusta has unveiled the Dragster RR and Brutale RR today, ahead of the EICMA show. Like the updated Brutale 800 RR, the Brutale Dragster 800 RR features a revised 798cc three-cylinder engine, which makes 140hp at the 13,100 rpm, and a very peaky 63 lbs•ft of torque at 10,100 rpm. Numerous visual cues have been changed, included red-anodized fork tubes, red-painted cylinder heads, and aluminum tubeless wire-spoked wheels. An eight-way adjustable steering damper continues the noticeable changes, to the 370 lbs machine (dry).

MV Agusta Brutale 800 RR — 140hp & MVICS 2.0

Along with the new Dragster RR, MV Agusta has debuted the Brutale RR, ahead of the EICMA show. Like its hot rod cousin, the MV Agusta Brutale 800 RR gets a 15hp increase, which makes for 140hp at the 13,100 rpm peak. A very peaky motor indeed, maximum torque arrives at 10,100 rpm at 63 lbs•ft. The Brutale RR also features the MVICS 2.0 electronics package, which first debuted on the still unreleased MV Agusta Turismo Veloce. An update to the already robust MVICS package, the key feature in the 2.0 revision is the quickshift operation, both for upshifts and downshifts. Equipped with EAS 2.0 and ABS as standard, we see the Brutale 800 RR priced at a modest €13,980 for the European market, while the similarly equipped MV Agusta Brutale 800 EAS ABS has a €2,300 price advantage, at €11,680 MSRP.

Ducati Scrambler Will Be “Made in Thailand”

Almost four years ago, we reported on Ducati opening a new assembly plant in Thailand. The move, which peeved Ducati’s factory workers, would see bikes destined for the Southeast Asian market assembled in the Thai plant, thus side-stepping many of the region’s aggressive tariffs on motorcycles. Nearing the end of 2014 now, and our Bothan Spies report that the Ducati Scrambler models will be the first motorcycles assembled in Ducati’s Thai plant that will then be shipped to the world market — a move that comes right after Ducati reached a new contract with its workers and unions, which sees the factory employees working fewer hours at higher wages.

Up-Close with the Yamaha YZF-R3

This week we not only go a chance to see the 2015 Yamaha YZF-R3 unveiled at the AIMExpo, but also we had the chance to see the R3 up-close in the flesh. The budget-minded sport bike shows the obvious signs of more cost-effecient construction and fitted components, yet retains the fit-and-finish you would expect from a Yamaha motorcycle. This makes the R3 a prime candidate for aspirational riders, who want an affordable first motorcycle that looks the part of a proper sport bike. Track enthusiasts and veteran riders though will be disappointed with the Yamaha YZF-R3’s non-adjustable KYB suspension, box swingarm design, and bulky chassis — this is still a 368lbs (wet) motorcycle.

Even More Photos of the 2015 Yamaha FJ-09 Leak

Yesterday we brought you the first official photo of the Yamaha FJ-09 tourer, which had been accidentally added to the Yamaha FZ-09 gallery on the Yamaha NA press site. Today it seems that leaks in Yamaha continue for the FJ-09, as our Dutch friends at Nieuwsmotor have discovered a bevy of press images, ahead of the 2015 Yamaha FJ-09’s debut at EICMA next month. Based around the FZ-09/MT-09 platform, the FJ-09 uses a similar three-cylinder engine as the sport nakeds, though looks to have more suspension travel and other touring elements. Picking up where the Yamaha TDM left off as a middleweight sport/adventure-tourer, the Yamaha FJ-09 could be a very interesting addition to Yamaha’s lineup.

Up-Close with the Kawasaki Ninja H2R

Asphalt & Rubber was on-hand for the AIMExpo in Orlando, covering the new bikes that are debuting on North American soil. We’ve already seen the new Yamaha YZF-R3 released here, as well as the Alta RedShift electric motorcycles (formerly BRD Motorcycles). While both bikes are impressive, and are massively important to the American motorcycle scene, the buzz remains about the Kawasaki Ninja H2R. The AIMExpo is the first venue for Americans to get a glimpse of Kawasaki’s hyperbike, and the H2R sits like a praying mantis, waiting to strike you with its supercharged charms. Naturally, we had to get a closer look…and bring you a bevy of high-resolution detail shots from the trades how floor. Enjoy!

2015 Yamaha FJ-09 Leaked ahead of EICMA

Someone at Yamaha is going to get a stern talking to today, as it seems a photo of the still unreleased Yamaha FJ-09 made its way to Yamaha’s press site accidentally, and didn’t yank it down before our friends at Common Tread caught a glimpse of it. Mixed in with photos of the Yamaha FZ-09, the photo of the 2015 Yamaha FJ-09 doesn’t really give too much away from the machine, as we’ve seen the same shot in black & white already. However, since it’s the new bike season, and Yamaha has already shown the YZF-R3 and teased the all-new YZF-R1, we thought it would be appropriate to show you this new model in all its glory. Based off the FZ-09 platform, the FJ-09 will be Yamaha’s budget-minded sport/ADV-touring machine, picking up were the old Yamaha TDM left off.

Ducati 1299 Will Have “Tiptronic-Like” Shifting

If there is a common thread for Ducati’s upcoming EICMA reveal, it is the influence and benefits of owner Audi AG. We have already seen the German car manufacturer’s variable valve timing technology find its way into the Testastretta engine, in the form of Desmodromic Variable Timing (DVT). Our sources say that the all-new Ducati Multistrada, which will debut in just a few weeks’ time, will be the first model equipped with DVT. While Ducati ups its ante in the ADV market, our Bothan spies have tipped us off to another piece of Audi tech that will find its way onto a Ducati motorcycle, as the 1299 will received a “Tiptronic-like” gearbox that allows for touch-button upshifts and downshifts.

Yamaha YZF-R3 Revealed – 321cc Twin Coming to the USA

The rumors were true, Yamaha is bringing a special small-displacement model to market, the Yamaha YZF-R3. As the name indicates, the new R3 gets a fuel-injected displacement bump over the R25, to the tune of 321cc. Debuted at the AIMExpo today, the Yamaha YZF-R3 is coming to the USA, with a price tag of $4,990. Said by Yamaha to have “class-leading power”, the new R3 finally adds a small-displacement sport bike to Yamaha’s North American lineup, and makes an attractive offering when compared to the other 250cc/300cc machines from the other Japanese manufacturers. Expect to see it in Yamaha dealers, starting January 2014. Yamaha North America expects the YZF-R3 to be the volume leader for the company in the USA and Canada, and rightfully so.

Ducati Announces DVT — Desmodromic Variable Timing

As was teased, Ducati is unveiling its “DVT” technology today, which stands for Desmodromic Variable Timing, and to showcase that technology (borrowed from Volkswagen), Ducati has produced the first motorcycle engine with variable valve timing on both the intake and exhaust camshafts. Adapted to the now-called Ducati Testastretta DVT engine, which we reported will debut first on the new Ducati Multistrada for 2015, Ducati’s new v-twin powerplant can change the intake and exhaust timing independently, and throughout the rev range. This means that the Ducati Testastretta DVT engine can be optimized for peak power at high rpms, while maintaing rideability and smoothness at lower rpms — not to mention keeping with emission and noise regulations throughout the rev range.

Suter 500 Factory V4 – Thank You for Smoking

05/14/2012 @ 12:01 pm, by Jensen Beeler23 COMMENTS

Suter 500 Factory V4   Thank You for Smoking Suter SRT 500 Factory V4 track bike

Asphalt & Rubber is based out of California, so that means smoking is akin to a cardinal sin out here, and on the hierarchy of egregious crimes against humanity, it ranks just slightly under torturing babies with hot pincers (heaven forbid you cause a baby to start smoking). Smoking indoors in outright verboten virtually everywhere, while puffing some nicotine anywhere outside that is near a restaurant, bar, club, ATM, hospital, pre-school, or tobacco shop is liable to cause a citizen to go murder-death-kill on you John Spartan.

The issue is so pervasive here, that it has even extended beyond cigarettes and into the realm of motorcycling, with The Golden State leading the charge on the banning of two-stroke motorcycles. We are now purely a “suck, squeeze, bang, blow” society, and while that suits many motorists just fine, there are some who enjoy the smell of pre-mix in the morning — you know who you are. You enjoy the sound of angry bees following you from apex to off-camber. You think a displacement for “serious riders” starts at around 250cc. You like your engine compression low, and your powerbands narrow. You sir (or madam), are a two-stroke junky, and we have just the fix you need.

Just as MotoGP replaced 500GP, we know see Moto2 & Moto3 replacing the lower two-stroke classes that remained in Grand Prix racing. Leading the charge on this mechanical front are a slew of new companies, most notably the chassis manufacturers, of which Suter is perhaps the most well-regarded. Making the weapon of choice for Marc Marquez in Moto2 this year, the Swiss company already had a sterling reputation before it went racing at an international level, but the firm’s success in the 2010 Championship exposed it to a whole new world of tw0-wheel performance.

Having a bevy of intriguing two-wheeled projects within its walls, the Swiss bike that catches our eye today is the Suter 500 Factory V4: a two-stroke, 500cc, V4, track weapon that puts out over 200 hp and weighs 284 lbs ready to race — no, that is not a typo. We’ll let you take a moment before continuing past the jump for more.