OMG: Leaked Hi-Res Photos of the Kawasaki Ninja H2R

In five hours the Kawasaki Ninja H2 will officially debut at INTERMOT…of course, the internet waits for no motorbike. In addition to the first leaked photo we brought you, we now have a bevy of high-resolution images of the Kawasaki Ninja H2R, the racing sibling to the H2. The Kawasaki Ninja H2R makes an incredible 300 horsepower from its 998cc inline-four engine, a number that is achieved by the H2 & H2R’s centrifugal supercharger. That figure is much larger than some publications were reporting from their “sources” inside Kawasaki — or were just fabricating wholesale to get pageviews. From the photos, we can see that the H2 & H2R use a trellis frame, carbon fiber fairings, and single-sided swingarm, three things you don’t usually see on a Kawasaki sport bike.

Brammo eCruiser & Other Models Spied in Investor Pitch

Brammo continues to build upon its war chest of investment, and has turned to crowd-funding site EarlyShares for help in that regard. The site is targeted towards Angel-type investors, and is along the lines of a Kickstarter-style site for the wealthy and investment-minded. The news that a company like Brammo is looking to raise more capital is nothing new, nor is it terribly noteworthy, but the documents provided to EarlyShares investors are certainly worth chewing on by two-wheeled enthusiasts. Perhaps the most interesting aspect is a diagram of Brammo’s planned model lineup, which briefly appeared on EarlyShares; and among other things, shows an eCruiser model from the Oregonian company. Boom goes the dynamite.

Review: Dainese Made to Measure Leather Racing Suit

Do you ride like Valentino Rossi, or maybe just want to look like him? I ask, because that’s the premise behind Dainese’s Made to Measure program. Giving everyday riders the same opportunity and attention to detail as the company’s sponsored racers, who compete at the heightest level of the sport, Dainese’s Made to Measure program allows you to order custom-fitting racing leathers, jackets, and pants from the trusted Italian brand. The following is my experience in making a race suit with the Italian company’s custom apparel program, and since the bulk of Made to Measure orders are custom racing suits, it seems an appropriate measure for its service.

Electric Supermoto Coming from KTM Too?

We already showed you KTM’s two electric dirt bike models, the KTM Freeride E-XC and KTM Freeride E-SX, which feature a 21hp / 31 lbs•ft electric PMAC motor and a swappable 2.6 kWh lithium-Ion battery pack. The models represent KTM’s rethinking on its electric range, especially when it comes to the current limitations of electric motorcycles, and what the current state-of-technology is in this space. While the new Freeride E-XC & E-SX show KTM is moving in the right direction, the two models didn’t do a lot for our asphalt-loving hearts here at A&R. Never fear though, as rumors from Italy’s Moto.it peg a supermoto version will debut at INTERMOT.

The Most Ridiculous Thing I’ve Ever Seen in This Industry

I have seen a lot of things in the motorcycle industry since I started Asphalt & Rubber, but never before have I seen something like this. During the autumn months, it is not uncommon for A&R to receive tips about new motorcycle models that are about to debut, and today was seemingly no different. This morning we got an enthusiastic email from a purported regular reader (make that two readers now), asking why we weren’t covering the leaked details on the supercharged Kawasaki H2, which were apparently “going viral” all over the internet, as the email told us. Like any good editor though, I dove into the story deeper. What I found has me supremely worried.

More Details on the Updated 2015 BMW S1000RR

I have to say, I really like the cut of BMW’s jib. Instead of making us dance through a social media bonanza of teasers and trickle-down motorcycle specs, the German company just publishes a press release with what it plans on changing for the 2015 BMW S1000RR. As loyal readers will know, we caught the updated S1000RR out testing last month, which showed a number of subtle cosmetic and system changes to the machine. BMW Motorrad has now clued us into what those changes are, namely a revised chassis geometry. From our spy photos, we know that the S1000RR will also get the HP4’s dynamic damping control (DDC) suspension, as well as new exhaust.

Ducati Owners: You Are Not Ready for the 1299 Superbike

You would have to be living under a rock not to know about the upcoming Ducati Scrambler, Bologna has made certain of that. But as we surmised in our analysis of Scrambler’s marketing, Ducati is due to update the Panigale as well for the 2015 model year. That educated guess, it seems has been proven correct, at least in part. While Borgo Panigale will continue to sell its namesake Ducati 1199 Panigale, the Panigale R model will be replaced for 2015 by the new 1299 superbike. As such, the 1299 will be Ducati’s consumer-facing machine for its World Superbike program — a project that has been greatly affected by WSBK’s intake restrictions for v-twins — thus race teams can expect an upgraded RS15 as well to be coming forth.

Ducati 1199 Streetfighter Concept by Shantanu Jog

One of the reason we show concept sketches here on Asphalt & Rubber is to help churn the imagination of our more creative two-wheeled brethren, so it warms my soul a little bit when a reader sends me something they’ve produced, which is due in part to their daily A&R patronage. As such, A&R reader Shantanu Jog sent us these sketches he did of a 1199-based Streetfighter. As good Ducatistas will know, the chassis of the Panigale creates some challenges for a fairing-less machine, and then there is the whole thing about how the Ducati Streetfighter as model never really sold well for Borgo Panigale. Still, for those who like their superbikes with a little less plastic, the idea of an 1199 Streetfighter is certainly appealing.

BMW Confirms New S1000RR Will Debut at INTERMOT – Two More New Bikes to Debut at EICMA

We already know that BMW Motorrad has a bevy of new machines coming out for the 2015 model year, and now the Germans are ready to admit as much. Confirming that a new BMW S1000RR superbike will debut at the INTERMOT show, BMW has also teased that two more new models will also debut at EICMA. From the spy photos that we obtained, we know that the 2015 BMW S1000RR features modestly updated bodywork, a restyled exhaust, and likely features a mild engine reworking. We will have to wait a couple more weeks to get the full details though, but expect a modest hp boost, semi-active suspension, and the Bosch MSC cornering-ABS system as standard — much like the BMW HP4.

Print Out Your Own Ducati 1199 Panigale Motorcycle

One day, 3D printing technology will fundamentally change the motorcycle industry. Currently however, companies use 3D printing, or rapid prototyping, to quickly and cheaply build parts for development machines. Enthusiasts also use the technology, though mostly as a novelty, which is the case here. A glimpse perhaps in how we will one day buy motorcycles, some clever modelers have “printed” a pretty convincing 3D copy of the Ducati 1199 Panigale. Built in CAD, and printed with a Ultimaker, the attention to detail is pretty astounding — note the chain that exactly meshes up with the front and rear sprockets. Forty pieces comprise the work, which have also been painted and lacquered to look like the genuine article.

Photos: A Future AMA Star in the Making

05/10/2012 @ 9:22 am, by Jensen Beeler15 COMMENTS

Photos: A Future AMA Star in the Making EBR 1190RS boy 08 635x425

One of the banes of any photographers existence is when someone walks right into the middle of your shot. There seems to be two schools of thought on how to deal with such an incident, with some preferring to let nature take its course, and wait for the intruder to leave the frame, while others prefer the scream/temper-tantrum school of thought that may or may not include throwing a gear bag in a fit of rage.

Where a photographer falls on that spectrum seems to be a function of how much time he or she spent setting up the shot, how much Red Bull had been consumed that morning, and whether it was another photographer who decided to start working with reckless abandon for his fellow photojournalists. However, there are some incidents where when someone walks into your shot, it is a welcomed addition. Snapping photos of the American flag-clad Erik Buell Racing 1190RS, I had such a moment, which I think touches the inner-child of all of us.

Up-Close with the Erik Buell Racing 1190RS ‘merica Edition

05/07/2012 @ 5:34 pm, by Jensen Beeler67 COMMENTS

Up Close with the Erik Buell Racing 1190RS merica Edition Erik Buell Racing EBR 1190RS American Flag paint 23 635x425

Erik Buell Racing had a good weekend at Sears Point, with Danny Eslick riding the Erik Buell Racing 1190RS to its first podium in Race 1, with Team Hero. Making an encore podium in Race 2, Geoff May also put the EBR 1190RS on the third step, this time for Team Amsoil/Hero. With the Erik Buell Racing 1190RS benefiting from Sear Points emphasis on handling instead of horsepower, the EBR has made up a ton of ground in just a short amount of time.

While the EBR 1190RS race bikes were on the track, their $40,000+ street-legal counterparts were on display outside of the Erik Buell Racing garage. Rocking an American flag livery, I naturally took pictures of this show bike. Eye catching to say the least, nothing says “Made in ‘merica” better than a red, white, and blue color scheme, especially when it is laid over carbon fiber. And while I want to love this bike because of its nuances and outside-of-the-box technical design, I don’t.

Trading patriotism for originality, Erik Buell Racing is still pushing the same worn-out Americana marketing plan that Harley-Davidson built for the sport bike company way back when. With two podium victories, a gorgeous product, and a story that is an encapsulation of hard work overcoming adversity, you would think that the folks from East Troy could put away the cheap parlor trick of using Americana to sell motorcycles. One gorgeous bike in its own right, but a played out theme as well. What happened to being innovative guys? Photos after the jump.

Photos: One Crashed 2012 Brammo Empulse RR

05/06/2012 @ 1:25 am, by Jensen Beeler6 COMMENTS

Photos: One Crashed 2012 Brammo Empulse RR 2012 Brammo Empulse RR Sears Point Crash Steve Rapp 13 635x425

Retaining the same basic shape as last year’s bike, the 2012 Brammo Empulse RR is still a looker, due mainly to its very “Iconic” livery scheme. Keeping things an Oregonian affair, the addition of Portland-based Icon as a sponsor to the Brammo racing effort bodes well for the team, and brings more validity to the budding electric motorcycle racing scene. It’s just a shame the color scheme lasted all of a few hours for Team Icon Brammo at Sears Point Raceway this weekend.

Crashing in yesterday’s first TTXGP practice session, Steve Atlas was diagnosed with six fractured vertebrae. With a thrashed bike, the Brammo squad managed to cobble together the race bike again, and thanks to its busy black & white design, one could barely see the black gaffer tape and white electrical tape that was keeping things together. Now with 130 hp at the rear wheel, as well as 35 lbs less poundage on its bulk, the revised Empulse RR clearly has a problem with people named Steve, as the electric motorcycle once again bucked a rider off, also again in Turn 7 at Sears Point.

Highsiding Steve Rapp during Saturday’s qualifying session, it is not clear what caused the rear wheel of the Empulse RR to spool up, as Rapp said he was still straight up and down with the bike when he went airborn. With fluid dripping from the bike afterwards, and Rapp stopping a lap earlier or two earlier because of the bike cutting out, the Brammo team is surely still pouring over the data as we type. That effort will do little to change the fact that Rapp has likely broken his hand from the incident, and will be out of racing the rest of the weekend, much to the chagrin to the Attack Performance AMA Superbike team, which Rapp took to a sixth place finish that same day in Superbike Race 1.

As you can see from the photos after the jump, the damage does not look too extensive to the bike — though, our assessment is only skin deep. Two riders, two highsides, one corner…no bueno. Surely not the result the Ashland-based crew wanted before it launches the street-bike version of the Brammo Empulse on Tuesday next week, it’s not clear if Brammo will try and race tomorrow, or if they even can race sans a healthy rider who lapped during Saturday’s qualifying.

TTXGP: Barnes Takes Lightning to Pole Position During Qualifying, While Brammo Sends Another Steve to the Medic

05/05/2012 @ 11:29 pm, by Jensen Beeler1 COMMENT

TTXGP: Barnes Takes Lightning to Pole Position During Qualifying, While Brammo Sends Another Steve to the Medic Lightning TTXGP 2012 Sears Point Popmonkey 2 635x423

The first North American TTXGP round is this weekend, piggybacking off AMA Pro Racing’s stop at Infineon RacewaySears Point. Lightning has been quietly putting in impressive lap times this year. On the #80 bike is veteran Banana rider Michael Barnes, whose 1’47 lap times would place him in the back third of the AMA Supersport class this weekend. Meanwhile on the #89 bike is WERA top-man Tim Hunt, who has had the dubious task of learning Sears Point on a 240hp machine. Hunt’s times have been seven to eight seconds off Barnes, though were ahead of Rapp’s before his crash.

While Lightning has shown considerably more polish than in past rounds, the team has had its own setbacks with reliability, including one incident which saw the chain adjuster bolts on the Lightning Mk. II sheer apart, dropping the chain off the sprocket, and locking up the rear wheel of Barney’s bike. Barnes was not pleased with this, but fared better than the two Steve’s on-board the 2012 Brammo Empulse RR.

Up-Close with the 2012 Brammo Empulse RR

05/04/2012 @ 11:41 pm, by Jensen Beeler8 COMMENTS

Up Close with the 2012 Brammo Empulse RR 2012 Brammo Empulse RR Sears Point 01 635x423

Brammo is back for electric motorcycle racing in the North American TTXGP series, as the Ashland-based company is set to defend it’s #1 plate this year with Steve Atlas on board ( Shelina Moreda is slated to join the team later in the season). Gaining a title sponsorship from Icon, Brammo arrived at Infineon Raceway Sears Point with some edgy graphics on the 2012 Brammo Empulse RR. Dropping roughly 35 lbs in weight, and gaining roughly 50hp over the bike they ran at last year’s season opener, Brammo is making most of those gains in its revised motor and power inverter for the newest Empulse RR.

The chassis is noticeably the same to last year’s bike, and sans some minor improvements here and there, the bike is technically very similar to last year’s lap-record setter. Unlike the Brammo Empulse R that will debut Tuesday next week, the Empulse RR does not use the six-speed IET gearbox. Brammo’s Brian Wismann explained to A&R that the high-voltage system that the Empulse RR uses does not benefit as much from the IET gearbox as the lower voltage street bike does, and thus hasn’t made it to the race bike…yet.

With these pictures taken just a couple hours before Steve Atlas had a highside crash at Sears Point, we imagine the 2012 Brammo Empulse RR doesn’t look as good as when we last saw it. Atlas took a pretty big hit, but is said to be ok (UPDATE: Atlas has six fractured vertebrae, and will be out for the weekend). The bike on the other hand…well, hopefully the Brammo crew can get it ready in time for this weekend’s two TTXGP races in wine country. More drool material after the jump.

Mission Motors TTXGP Entry Spotted at Infineon

04/28/2009 @ 2:33 pm, by Jensen Beeler1 COMMENT

Mission Motors TTXGP Entry Spotted at Infineon mission one motors infineon test 1 560x353

Only 45 days remain until the start of the TTXGP, and electric hopefuls that once only existed on paper are starting to hit the pavement. We were delighted this morning to see that the Mission One from Mission Motors, has been spotted taking laps at Infineon Raceway (Sears Point to CA locals) in California, with pictures to boot.

It looks like most of the original CGI of the digital concept has made it into street form. We’re still not crazy about the nose section, but the rest of the bike looks like a candidate for a TRON re-imagining. There’s no word on lap times or other performance numbers, but it looks like Tom Montano was giving the bike a proper thrashing around the coastal track. 

Source: TTXGP via Autoblog Green