Report: Honda RC213V-S Priced at ¥20 Million

According to a report made by The Asahi Shimbun, Japan’s second largest daily newspaper, Honda has green-lit the RC213V-S project, with a price tag of 20 million yen — roughly $170,000 USD. The Honda RC213V-S debuted at the 2014 EICMA show, and was as advertised: a MotoGP race bike with lights and mirrors added to it. Honda teased show-goers and the media by say that the RC213V-S model was only a prototype, adding more fuel to the speculation regarding whether the Japanese firm would actually produce the long-awaited model. Since its inception, price figures have been rumored and banded about, almost all of which were in the six-figure category.

Polaris Acquires Electric Motorcycle Business from Brammo

Polaris Industries has acquired the electric motorcycle business from Brammo, Inc. Polaris is also acting as a leading investor in the recapitalization of Brammo, which will enable Brammo to focus exclusively on the design, development, and integration of electric vehicle powertrains. This means that Polaris will takeover building electric motorcycles at its Spirit Lake, IA production facility, and that Brammo will continue developing EV powertrains for Polaris and other OEM partners. According to its press release, Polaris will start production of electric motorcycles in the second half of 2015.

Ducati Sets Sales Record for 2014 – 45,100 Bikes Sold

Ducati Motor Holding is reporting another record sales year, and that the Italian motorcycle manufacturer sold 45,100 bikes in 2014. This marks the fifth year in a row that Ducati has shown sales growth, and it’s the third year in a row that the sales figures have been an all-time record for the Italian brand. Sales for 2014 were up 2% over 2013, with the USA again leading as Ducati’s most important market (8,804 units sold in the USA). Unsurprisingly, the Asian market is growing quickly for Ducati as well, up 11% in 2014. Ducati attributes its sales growth in-part to its new water cooler Monster line, where the Ducati Monster 1200 and Ducati Monster 821 helped raise Monster sales by 31%, with 16,409 new bikes sold in 2014.

Newspeak: The Advent of the “Adventure-Sport”

In the past decade the ADV segment has been a confusing amalgamation of differing interests, and over that time-period, two distinct groups have boiled to the surface. First there are the “Long Way Round” hopefuls, who invariably own a BMW R1200GS/A, and seem to be on some sort of perpetual preparation for an African safari. More recently, a second group has appeared: those riders who look to these big ADV bikes as more versatile Sport-Touring machines. All these riders, and their bikes, have been wedged into a single “Adventure” category, and it has created a bit of confusion for the segment. So, I want to introduce the concept of the “Adventure-Sport” and how it differentiates from the previous “Adventure-Touring” category.

MotoGP: Ducati’s Desmosedici GP15 Officially Delayed

As had been widely expected, Ducati will not have the GP15 ready for the first test at Sepang, in early February. In an interview with the MotoGP.com website, due to be shown on 19th January, Ducati Corse boss confirmed that work was still underway on the all-new bike; and that instead, Ducati will be bringing an uprated version of last year’s bike, dubbed the GP14.3, to test aspects of the new design not requiring the new engine. The delays have been trailed by both Dall’Igna and Paolo Ciabatti, speaking to the media at the Valencia test and at the Superprestigio dirt track event in December. The GP15 is a completely new bike, designed from the ground up, with a completely redesigned engine.

1972 Honda CB500, 3D Printed to Life Size

We’ve talked a bit before about the virtues of 3D printing, and how this increasingly affordable technology could change the consumer landscape as far as how we buy basic parts in the motorcycle industry. For as practical as how 3D printing, or rapid prototyping, can be, it can also be beautiful and used for art. This story is sort of a merger of those two ideas. Jonathan Brand has hoped to buy a 1972 Honda CB500 motorcycle, but the birth of his son changed that plan. Where there is a will though, there is a way, and Brand came up with the next best thing — he built a life-size model of a CB500 with his 3D printer.

Mercedes CEO: No Further Acquisition of MV Agusta

Italians are rejoicing over the news that Mercedes-Benz CEO Dieter Zetsche has made it clear that the German car manufacturer is not interested in acquiring more of MV Agusta’s private stock. Loyal readers will remember that Mercedes-AMG purchased 25% of MV Agusta last October, for a rumored €30 million — echoing the move Audi made in Ducati. Talking at the North American International Auto Show in Detroit though, Zetsche said “however, to avoid what happened with Ducati we point out that we have no intention to take over the business or produce motorcycles. MV Agusta can do it better than us.”

Triumph Has Its Best Sales Year Since Its Rebirth

Good news for Triumph Motorcycles fans, as the British motorcycle marque is reporting a banner year for 2014 — with 54,432 units sold worldwide. That figure is up 4% over 2013’s sales figure of 52,089 units, which was the first time that Triumph broke the 50,000 unit mark since the company’s rebirth in 1984. Helping Triumph reach this new high-water mark was the company’s home market, where Triumph accounted for one-in-five motorcycles sold in the UK (over 500cc). Overall, Triumph saw 8% growth in the UK, as modest growth considering the British market was up roughly 10% last year. The news is not all good, however. Triumph previously reported that financial figures for the first-half of 2014 were down, with revenue down £364 million from £369 million, and net income at a loss of £8 million.

Husqvarna 401 Concepts Will Be 2017 Production Models

One of the more intriguing things to come out of the 2014 EICMA motorcycle show in Milan were Husqvarna’s two “401” concepts, the Vitpilen and Svartpilen. The café-styled bikes are based off the KTM 390 Duke platform, though you wouldn’t know it from looking at them. Husqvarna said at EICMA that if there was sufficient interest, the Vitpilen and Svartpilen could go into production. With an overwhelming critical response from the press and fans, it should come no surprise then that our friends at Bike.se are reporting that Husqvarna intends to make the small-displacement machines a part of its 2017 model lineup.

Ducati Desmosedici Cucciolo Concept by Alex Garoli

Imagine if you will that the first Ducati, the Ducati Cucciolo, and the most modern Ducati, the Ducati Desmosedici, had a child — what would it look like? That far-fetched question nagged Mexican designer Alex Garoli, so he decided to build a concept of the machine. At the core of the Ducati Desmosedici Cucciolo is the V4 powerplant of Italy’s MotoGP race bike, and around it Garoli has imagined a modern steel trellis frame that mimics the bicycle frame look of the post-WWII motorized bicycles that pulled Italy out of deep recession. Of course the most interesting thing about Garoli’s concept is the fact that it’s a ~12:1 scale model. The work is pretty exquisite, even if you don’t agree with the concept’s ethos.

Analyzing the Details of the 2014 WSBK & EVO Regulations

08/27/2013 @ 6:18 pm, by David Emmett20 COMMENTS

sylvain-guintoli-burnout-aprilia-racing

It’s been a busy couple of days at FIM headquarters, as they have been putting the finishing touches to the new rules for both the World Superbike and MotoGP series. The biggest news was the release of the detailed technical regulations for the World Superbike series for 2014 and beyond. The new rules had been announced in early August, but the precise details had to wait until now.

Though the changes are extremely detailed, they can be boiled down to a few major points: the introduction of the EVO class, which allows Superstock engines in Superbike chassis; the introduction of price caps on suspension and brakes; restrictions on gear ratios; and the introduction of an engine allocation system similar to that in MotoGP and also in Superstock.

New Cost-Cutting Rules for World Superbike Starting in 2014

06/07/2013 @ 4:10 am, by Jensen Beeler12 COMMENTS

World-Superbike-logo

The FIM, Dorna & MSMA have been able to come to an accord on the new rules for the World Superbike Championship, and the name of the game is cost reduction.

In a series of changes that will begin in 2014, and applied over the next three seasons, WSBK will see a price cap for the teams’ race motorcycles and their components (rumored to be €250,000).

A maximum number of engines will also be set for each rider, a rule that has already been implemented in MotoGP with a great deal of success.

The last provision seems to be a guarantee from the manufacturers that a minimum number of motorcycles “with the same state of tuning” will be made available to teams for lease or purchase, though this provision doesn’t seem to distinguish from factory and satellite spec machinery.

The brief announcement from World Superbikes is after the jump.

WSBK: Bikes To Be Price-Capped at €250,000 per Season?

01/14/2013 @ 11:17 am, by David Emmett13 COMMENTS

fat-cat-cash

Now that it has the World Superbike series under its control, Dorna is turning its attention to the question of costs. It was an issue that, WSBK insiders claim, the Flammini brothers and Infront spent too little time on, preferring to focus on trying to compete with MotoGP instead. The series’s critics charge that this obsession allowed bikes into the series that were more like MotoGP prototypes than production road bikes.

The Aprilia RSV4 is one of the bikes most often named in this regard, though perhaps the most extreme example was the Foggy Petronas FP3 machine, of which the entire homologation run is rumored to be stored in a warehouse owned by the Malaysian oil company in Kuala Lumpur. As a result, grids have shrunk from around thirty starters in 2009 to just twenty in 2013.

Dorna’s solution is a mixture of methods gleaned from their recent experience in MotoGP: price caps and pressure on the manufacturers to reduce costs of their own accord. In an interview with the German-language website Speedweek, Carmelo Ezpeleta said that his aim is to have all manufacturers supply teams with bikes at a cost of €250,000 per rider.

Included in that amount would be two bikes per rider, and full support to complete an entire season. Only crash damage would be excluded from the quarter of a million per season, that being a cost that is outside the control of the factories. In addition, Ezpeleta said each manufacturer had to be prepared to supply up to six riders with equipment, should there be sufficient interest, a measure currently being enforced in Moto3.