Officially Official: MV Agusta Brutale Dragster 800 RR

We already brought you the first high-resolution photos of the MV Agusta Brutale Dragster 800 RR (say that three times fast!) yesterday, which were sent to us by our Bothan Spies. In response, MV Agusta has unveiled the Dragster RR and Brutale RR today, ahead of the EICMA show. Like the updated Brutale 800 RR, the Brutale Dragster 800 RR features a revised 798cc three-cylinder engine, which makes 140hp at the 13,100 rpm, and a very peaky 63 lbs•ft of torque at 10,100 rpm. Numerous visual cues have been changed, included red-anodized fork tubes, red-painted cylinder heads, and aluminum tubeless wire-spoked wheels. An eight-way adjustable steering damper continues the noticeable changes, to the 370 lbs machine (dry).

MV Agusta Brutale 800 RR — 140hp & MVICS 2.0

Along with the new Dragster RR, MV Agusta has debuted the Brutale RR, ahead of the EICMA show. Like its hot rod cousin, the MV Agusta Brutale 800 RR gets a 15hp increase, which makes for 140hp at the 13,100 rpm peak. A very peaky motor indeed, maximum torque arrives at 10,100 rpm at 63 lbs•ft. The Brutale RR also features the MVICS 2.0 electronics package, which first debuted on the still unreleased MV Agusta Turismo Veloce. An update to the already robust MVICS package, the key feature in the 2.0 revision is the quickshift operation, both for upshifts and downshifts. Equipped with EAS 2.0 and ABS as standard, we see the Brutale 800 RR priced at a modest €13,980 for the European market, while the similarly equipped MV Agusta Brutale 800 EAS ABS has a €2,300 price advantage, at €11,680 MSRP.

Ducati Scrambler Will Be “Made in Thailand”

Almost four years ago, we reported on Ducati opening a new assembly plant in Thailand. The move, which peeved Ducati’s factory workers, would see bikes destined for the Southeast Asian market assembled in the Thai plant, thus side-stepping many of the region’s aggressive tariffs on motorcycles. Nearing the end of 2014 now, and our Bothan Spies report that the Ducati Scrambler models will be the first motorcycles assembled in Ducati’s Thai plant that will then be shipped to the world market — a move that comes right after Ducati reached a new contract with its workers and unions, which sees the factory employees working fewer hours at higher wages.

Up-Close with the Yamaha YZF-R3

This week we not only go a chance to see the 2015 Yamaha YZF-R3 unveiled at the AIMExpo, but also we had the chance to see the R3 up-close in the flesh. The budget-minded sport bike shows the obvious signs of more cost-effecient construction and fitted components, yet retains the fit-and-finish you would expect from a Yamaha motorcycle. This makes the R3 a prime candidate for aspirational riders, who want an affordable first motorcycle that looks the part of a proper sport bike. Track enthusiasts and veteran riders though will be disappointed with the Yamaha YZF-R3’s non-adjustable KYB suspension, box swingarm design, and bulky chassis — this is still a 368lbs (wet) motorcycle.

Even More Photos of the 2015 Yamaha FJ-09 Leak

Yesterday we brought you the first official photo of the Yamaha FJ-09 tourer, which had been accidentally added to the Yamaha FZ-09 gallery on the Yamaha NA press site. Today it seems that leaks in Yamaha continue for the FJ-09, as our Dutch friends at Nieuwsmotor have discovered a bevy of press images, ahead of the 2015 Yamaha FJ-09’s debut at EICMA next month. Based around the FZ-09/MT-09 platform, the FJ-09 uses a similar three-cylinder engine as the sport nakeds, though looks to have more suspension travel and other touring elements. Picking up where the Yamaha TDM left off as a middleweight sport/adventure-tourer, the Yamaha FJ-09 could be a very interesting addition to Yamaha’s lineup.

Up-Close with the Kawasaki Ninja H2R

Asphalt & Rubber was on-hand for the AIMExpo in Orlando, covering the new bikes that are debuting on North American soil. We’ve already seen the new Yamaha YZF-R3 released here, as well as the Alta RedShift electric motorcycles (formerly BRD Motorcycles). While both bikes are impressive, and are massively important to the American motorcycle scene, the buzz remains about the Kawasaki Ninja H2R. The AIMExpo is the first venue for Americans to get a glimpse of Kawasaki’s hyperbike, and the H2R sits like a praying mantis, waiting to strike you with its supercharged charms. Naturally, we had to get a closer look…and bring you a bevy of high-resolution detail shots from the trades how floor. Enjoy!

2015 Yamaha FJ-09 Leaked ahead of EICMA

Someone at Yamaha is going to get a stern talking to today, as it seems a photo of the still unreleased Yamaha FJ-09 made its way to Yamaha’s press site accidentally, and didn’t yank it down before our friends at Common Tread caught a glimpse of it. Mixed in with photos of the Yamaha FZ-09, the photo of the 2015 Yamaha FJ-09 doesn’t really give too much away from the machine, as we’ve seen the same shot in black & white already. However, since it’s the new bike season, and Yamaha has already shown the YZF-R3 and teased the all-new YZF-R1, we thought it would be appropriate to show you this new model in all its glory. Based off the FZ-09 platform, the FJ-09 will be Yamaha’s budget-minded sport/ADV-touring machine, picking up were the old Yamaha TDM left off.

Ducati 1299 Will Have “Tiptronic-Like” Shifting

If there is a common thread for Ducati’s upcoming EICMA reveal, it is the influence and benefits of owner Audi AG. We have already seen the German car manufacturer’s variable valve timing technology find its way into the Testastretta engine, in the form of Desmodromic Variable Timing (DVT). Our sources say that the all-new Ducati Multistrada, which will debut in just a few weeks’ time, will be the first model equipped with DVT. While Ducati ups its ante in the ADV market, our Bothan spies have tipped us off to another piece of Audi tech that will find its way onto a Ducati motorcycle, as the 1299 will received a “Tiptronic-like” gearbox that allows for touch-button upshifts and downshifts.

Yamaha YZF-R3 Revealed – 321cc Twin Coming to the USA

The rumors were true, Yamaha is bringing a special small-displacement model to market, the Yamaha YZF-R3. As the name indicates, the new R3 gets a fuel-injected displacement bump over the R25, to the tune of 321cc. Debuted at the AIMExpo today, the Yamaha YZF-R3 is coming to the USA, with a price tag of $4,990. Said by Yamaha to have “class-leading power”, the new R3 finally adds a small-displacement sport bike to Yamaha’s North American lineup, and makes an attractive offering when compared to the other 250cc/300cc machines from the other Japanese manufacturers. Expect to see it in Yamaha dealers, starting January 2014. Yamaha North America expects the YZF-R3 to be the volume leader for the company in the USA and Canada, and rightfully so.

Ducati Announces DVT — Desmodromic Variable Timing

As was teased, Ducati is unveiling its “DVT” technology today, which stands for Desmodromic Variable Timing, and to showcase that technology (borrowed from Volkswagen), Ducati has produced the first motorcycle engine with variable valve timing on both the intake and exhaust camshafts. Adapted to the now-called Ducati Testastretta DVT engine, which we reported will debut first on the new Ducati Multistrada for 2015, Ducati’s new v-twin powerplant can change the intake and exhaust timing independently, and throughout the rev range. This means that the Ducati Testastretta DVT engine can be optimized for peak power at high rpms, while maintaing rideability and smoothness at lower rpms — not to mention keeping with emission and noise regulations throughout the rev range.

Ronin – 47 American Street Bikes Like No Other

10/01/2014 @ 1:03 pm, by Jensen Beeler26 COMMENTS

Ronin   47 American Street Bikes Like No Other Ronin Motor Works RMW 47 Ronin 07 635x357

You will have to go back almost five years to remember Magpul’s Ronin motorcycle concept. Based off the Buell 1125R chassis and engine, the Magpul Ronin was very refreshing and different approach to an American street bike.

Fast-forward to the present, and Ronin Motor Works (the company spun out of Magpul to make the Ronin motorcycle) is ready to sell its first 12 units of the avant-garde bike.

Key items on the Ronin include a linkage fork design, with a Penske shock handling the bumps traveling up the aluminum girders. Our favorite feature, the radiator has been place high up, near the handlebars, and features an integrated headlight design.

Magpul Ronin 1125R – A Samurai Looking for a Master

01/17/2013 @ 3:12 pm, by Jensen Beeler34 COMMENTS

Magpul Ronin 1125R   A Samurai Looking for a Master Magpul Ronin 1125R 02

It has been some time since we saw the Magpul Ronin concept bike, a re-imagined Buell 1125R that was built by the folks at Magpul Industries — a company more well-known in the gun community than than in motorcycling. Making waves with the design though, Magpul setup a new company, Ronin Motorworks, to explore the idea further. Hiring a team of designers and engineers from the motorcycle industry, the result of this endeavor is the Magpul Ronin 1125R sport bike, of which 47 examples will be made, in honor of the 47 Ronin story from feudal Japan.

A fitting metaphor for the story behind the closure of Buell Motorcycles, the 47 Magpul Ronin 1125R bikes will be built from new Buell 1125 chassis that were stored from the original inventory. While a limited-production machine, one of the cooler details of the Magpul Ronin 1125R is that instead of a number plate scheme for the 47 motorcycles, Ronin Motorworks will name each bike after one of the samurais from the original story.