Two New Ducati Scramblers Spotted in CARB Docs?

More new model news, as filings with the California Air Resources Board (CARB) suggest that we will see two new Scrambler models debuting, later this year. We come to this conclusion because emissions papers from CARB state that “Scrambler CR” and “Scrambler DS” models are coming from Ducati for 2017, in addition to the models we already have from the Italian manufacturer. The two-letter designations imply that we are likely to see a café racer (CR) version of the Ducati Scrambler, as well as a dual-sport (DS) version of the machine, which we have already seen in spy photos. This news isn’t surprising, since Ducati has made no secret about its desire to expand the Scrambler lineup.

New Four-Cylinder MV Agusta Brutale Debuting at EICMA

You know the new-bike season is just around the corner, because we’re starting to get glimpses of what the motorcycle OEMs will debut at shows like INTERMOT and EICMA. We’ve already had a glimpse of the 2017 Honda CBR1000RR, as well as the 2017 BMW S1000R, and if the folks at Italian motorcycle magazine Motociclismo are correct, the following is a concept sketch of the four-cylinder 2017 MV Agusta Brutale. The new Brutale is one of two new bikes that MV Agusta will launch at the EICMA show, with the other machine pegged as a special edition three-cylinder model. To be up front, we don’t expect anything too crazy from MV Agusta for the 2017 model year, with the Italian company still limited in options by its financial situation.

Spotted: The Subtly Changed 2017 BMW S1000R

Thanks to our loyal readers, we were pointed in the direction of some photos of what looks like a pre-production version of the upcoming 2017 BMW S1000R streetfighter (one of the machines we tipped for an update this coming model year). It appears that the new BMW S1000R is going to get a bevy of changes already found on the current BMW S1000RR superbike, both visually and mechanically. Caught at the Oschersleben track in Germany, we can’t imagine how many people walked by this parked motorcycle, without realizing what it was. We can’t blame them though, because the updates coming to the 2017 BMW S1000R are subtle, and you’d really have to know what you’re looking at, in order to see the changes.

More of the Sexiness That Is the KTM Moto2 Race Bike

KTM’s Moto2 project officially debuted today, with Aki Ajo managing the team that will consist of riders Brad Binder and Miguel Oliveira. Like KTM’s MotoGP project, with the KTM RC16 race bike, the Moto2 project uses some intriguing elements. Namely, the frame is of a steel trellis design, the suspension is provided for by WP, and of course the engine is a lightly tuned Honda CBR600RR lump. If looks could win races, the WP KTM Moto2 machine would already be a contender. That being said, we have high expectations for the racing program in next year’s Moto2 Championship. Until then tough, we’ll let you drool over the high-resolution images we have waiting for you, after the jump.

Hi, Are You the 2017 Honda CBR1000RR?

If you were hoping that the 2017 Honda CBR1000RR would be a completely new machine for sport bike enthusiasts, the following might disappoint you. This is because photos published on Twitter seem to suggest that the 2017 Honda Fireblade will get mostly cosmetic changes for the upcoming model year. As you can see after the jump, what looks like the new CBR1000RR was caught lapping for what appears to be a PR video spot for the Japanese OEM. While it is clear from these shots that the pictured Honda CBR1000RR has a radically new fairing design, a closer comparison to the chassis (see above) suggests that the machine is simply the current generation machine, with new clothing.

Official: KTM Enters Moto2 with Binder and Oliveira

KTM is to enter the Moto2 class. The Ajo team is to expand its current Moto2 operation to two riders, with Brad Binder and Miguel Oliveira (not Tom Lüthi, as we had previously reported) taking the place of the departing Johann Zarco. The team is also to switch from Kalex to KTM, as part of KTM’s project to provide a career path for young riders from the FIM CEV Moto3 championship through all three Grand Prix classes to MotoGP. The names of the riders involved should come as no surprise. Brad Binder is a race or two away at most from becoming the 2016 Moto3 world champion, and Miguel Oliveira came very close to winning the Moto3 title in 2015, as Binder’s teammate in the Red Bull KTM Ajo Moto3 team. Both riders are highly rated both by KTM and by team boss Aki Ajo.

MotoGP Aerodynamic Rules Published, No Wings Allowed

The aerodynamic rules for the 2017 MotoGP season and beyond have been published. At a meeting of the Grand Prix Commission at Misano, a proposal from Dorna’s technical team was accepted, banning aerodynamic devices in as general a wording as possible. Wings, bulges, and anything protruding from the front of the fairing are now banned. The proposal was drawn up by a small group consisting of Director of Technology Corrado Cecchinelli, Technical Director Danny Aldridge, and Race Director Mike Webb. Their main focus was to keep the wording as general as possible, so as to avoid loopholes for engineers to exploit. Technical Director Danny Aldridge will have the final word on any fairing protrusion, precisely to prevent any doubt about workarounds.

Two New BMW Models Debuting a INTERMOT

Every other year, the motorcycle industry gathers in Cologne, Germany in October, for the INTERMOT trade expo. The show provides a good alternative for the Germanic brands to launch new machines, with BMW and KTM often showcasing new models at the show. This year will be no different. To that end, BMW Motorrad is already getting its hype machine warmed up, telling us that several models will debut updates in Cologne. More importantly, zie Germans tell us that two new motorcycles will also debut at the INTERMOT show. What those models will be is certainly the conjecture du jour, since there are several possibilities that BMW Motorrad could be working on. This might make decoding BMW’s game plan all but impossible, but we can still give it a try.

#RideHVMC Freeman Racing Pays Tribute to the FDNY

This weekend is the final round of the MotoAmerica Championship, being held at the New Jersey Motorsports Park. This weekend also marks the 15th anniversary of the September 11th attacks on the World Trade Center, The Pentagon, and United Airlines Flight 93. We all know the sacrifices that were made by New York’s first responders, though admittedly sometimes we take those sacrifices for granted. The sacrifice hasn’t been lost on the #RideHVMC Freeman Racing Ducati team though, who are based out of Ossining, New York. As such, Corey Alexander and the #RideHVMC Freeman Racing Ducati Panigale R will be wearing a special livery that commemorates the men and women of the New York City Fire Department. As you will see in the photos after the jump, “Engine 23” is a fetching motorcycle, with a touching message.

Not-A-Review: Alta Motors Redshift MX

For a long time now, Asphalt & Rubber has been following the progress of Alta Motors (formerly BRD Motorcycles), as they have worked to make a lites-class comparable electric motorcycle. With the Redshift MX motocross and Redshift SM supermoto bikes now shipping from the company’s San Francisco facility, the motorcycle community can finally see in the flesh what I have been calling one of the most competent electric motorcycles yet produced. I was impressed with the Redshift SM prototype that I rode back in 2009, and the finalized form of the Redshift has only matured further from its strong start. I don’t want you simply to take my biased word for it though, so for today’s post, I have enlisted the help of my Two Enthusiasts Podcast co-host, Quentin Wilson.

Honda’s Kumamoto Factory Back to Normal Production for Large-Displacement Motorcycles

08/24/2016 @ 1:02 am, by Jensen Beeler1 COMMENT

Honda-Kumamoto-Factory

Honda’s flagship factory, in the Kumamoto Prefecture, is now back to normal production levels, after its slow recovery from earthquake damage sustained earlier this year.

For those who don’t remember, Honda took the Kumamoto factory offline on April 14th, resumed minor operations on May 6th, and resumed production of key models on June 6th.

Honda says that its large motorcycle production lines are now ready to go back to work, meaning the production at the Kumamoto factory is now back to its normal levels, though mini-vehicle parts production has been transferred to Honda’s Suzuka factory.

Production Resumes at Honda’s Kumamoto Factory

06/14/2016 @ 12:06 pm, by Jensen Beeler4 COMMENTS

Honda-Kumamoto-Factory

After seeing the region devastated by earthquakes, the Honda factory in the Kumamoto Prefecture is slowly coming back online. The Kumamoto factory (seen above, before the earthquake) has been offline since April 14th, though resumed minor operations on May 6th.

Honda says it has finally completed removal of debris from its most affected facilities; and as of June 6th, the company has partly resumed production of its main motorcycle models.

This is of particular note for American motorcyclists, as it means that Honda can once again being producing the Honda Africa Twin adventure-tourer, which was mid-production for the US market at the time of the earthquakes.

What the Honda Kumamoto Factory Closure Means for You

05/09/2016 @ 5:33 pm, by Jensen Beeler13 COMMENTS

Honda-Kumamoto-Factory

After devastating tremors in the region, Honda’s Kumamoto factory, as well as the facilities of their nearby suppliers, were closed for equipment and structural repairs.

Making progress on those repairs, Honda partially re-opened its Kumamoto facility two weeks ago, though the factory’s production capabilities currently remain limited.

Now, the latest word from Honda is that Kumamoto will be back to full capacity by mid-August of this year, though it goes without saying that the production time will affect the rollout of several Honda machines.

Honda Halts Operations at Its Kumamoto Factory After Earthquakes Strike Japan

04/18/2016 @ 11:31 am, by Jensen BeelerComments Off on Honda Halts Operations at Its Kumamoto Factory After Earthquakes Strike Japan

earthquake-seismograph

If you have been following mainstream news, you will know that the Pacific Rim has been active with earthquake activity these past few days.

In addition to the devastating movements in Ecuador, Japan has been rocked by a series of earthquakes as well, two of which have centered on the Kumamoto prefecture of the country.

If that names sounds familiar to motorcycle enthusiasts, it is because Kumamoto is Honda’s mothership for motorcycle production. As such, Honda is halting the operations of its Kumamoto factory, thru the rest of this week (ending April 22, 2016).

Honda Motor Co. Produces Its 300 Millionth Motorcycle

11/24/2014 @ 11:55 pm, by Jensen Beeler13 COMMENTS

Honda-Dream-Type-D

Hosting a ceremony today in Tokyo, Honda Motor Company announced that it has produced cumulatively 300 million motorcycles worldwide.

The milestone, which was actually reach in September of this year, but just now celebrated by the Japanese company, comes in Honda’s 66th year of making motorcycles, when the brand entered the market with the Honda Dream Type-D in 1949.

Honda Working on a Scooter/Motorcycle Hybrid for the US

09/21/2012 @ 6:01 pm, by Jensen Beeler13 COMMENTS

While the fact that Honda is set to bring a MotoGP-inspired sport bike to market stole the show during Honda CEO Takanobu Ito’s end-of-the-fiscal-year speech, the Honda CEO also let drop the fact that Big Red is working to bring to market a larger and more “torqueful” version of its Mid Series (note the caps) maxi-scooter concept, which will debut first in the American market.

You may remember the Honda Mid Concept, a 700cc maxi-scooter design that debuted at EICMA in 2010. Featuring a smooth and fuel-efficient 700cc twin-cylinder motor, the Mid-Concept gave rise to pragmatic bikes like the Honda NC700S & Honda NC700X, which used the maxi-scooter’s 700cc Integra motor in their design.

Honda Restarting Motorcycle Production March 28th

03/25/2011 @ 1:14 pm, by Jensen Beeler2 COMMENTS

Honda has announced that it will be restarting motorcycle production at its Kumamoto factory as of Monday, March 28th. Initially closing all its facilities in Japan after the devastation caused by the Sendai earthquake, Kumamoto will be one of Honda’s first facilities to re-open in almost two weeks’ time.

While the company’s Sayama, Saitama, and Suzuka facilities will remain closed through April 3rd, Honda will make a decision on when to restart production at those locations as that date becomes closer. Honda will continue to make decisions on its operations from this date forth, keeping a close eye on its supply chain and the good of the country as whole as the situation in Japan continues to change and evolve.

Watch the Honda VFR1200F Be Built Every 90 Seconds at Kumamoto Factory

02/02/2010 @ 5:35 pm, by Jensen Beeler7 COMMENTS

Honda’s factory in Kumamoto is a high-tech enviormentally friendly facility that might just be as innovative as the new VFR1200F. Churning out a new VFR every 90 seconds, Kumamoto’s wrenches are all digitally linked, and store build information for each individual motorcycle. Did worker X have a habit of over-tightening the connecting rods? If so Honda can track exactly which bikes were affected by his/her mistake, pinpointing the problem. That’s pretty cool in our book.

Check out the video after the jump for more information about the Kumamota plant and watch the VFR1200F get put together.