Some Thoughts on MV Agusta & A Story About Two Letters

MV Agusta USA recently invited a slew of journalists down to Fontana, California in order to talk about the company’s new business plan, and to ride its current lineup of motorcycles on the infield course. This article is “Part 1″ of that experience, as I wanted to separate my thoughts on MV Agusta, MV Agusta USA, and the general motorcycling climate into one story, and then have my “not-a-review” of the machines for another article. Got it? Ok, let’s go. It is probably easiest to start with where MV Agusta is as a company. MV Agusta has a started a new three-year business plan, which sees the company pushing into a full-range of motorcycles, pushing outside of its Italian boundaries, and pushing out of the “luxury” brand segment.

Photos: Ducati Desmosedici GP15

The Ducati Desmosedici GP15 is a machine that has been long in the making. It represents Gigi Dall’Igna’s next step forward for the wayward Ducati Corse MotoGP team, and it is the dubious honor of holding the hopes of Ducati fans around the world, who see the machine as the silver bullet that will return Ducati to the forefront of racing prowess — no pressure. The most obvious change that can be seen on the GP15 is the re-routing of the exhaust, with the undertail pipes collecting on the right-hand side of the machine, rather than coming in from both sides and meeting in the middle. Can you spot any other changes in the high-resolution photos after the jump? Let us know in the comments.

Politics & Corruption: Why There Isn’t a Race in Indonesia

If anyone needed any further proof that Indonesia is important to the Japanese motorcycle manufacturers, the fact the Repsol Honda team chose Bali as the location to launch their 2015 MotoGP project should remove any doubt. But if Indonesia is so important to the manufacturers, and to MotoGP, why is there not a race there? Over the course of the MotoGP test at Sepang, I had a few conversations with people on the subject. On the record, the story was always the same: we need a suitable track, and as soon as one exists we will be happy to go there. Off the record, however, they were much less optimistic.

A Requiem for Kenji Ekuan & The Kando of GK Design

Industrial design is not a commonly known, much less well understood, profession. To some it suggests arranging equipment inside factories, to others it means some kind of product engineering. In reality it is the search for, and expression of, human satisfaction in inanimate objects that are mass produced. That’s quite a mouthful, and to the average person it may sound like jiberish written for some pretentious coffee table book, but it is the truth. At least, it is one version of the truth as seen by the GK Design Group of Tokyo, Japan. If you ride motorcycles, then you are intimately familiar with the work of this large and internationally respected studio. Since only its second production bike, the indigenously designed YA-1, every Yamaha motorcycle since 1958 has been crafted by GK.

Are You The MV Agusta F4 RC?

What look to be official photos of the MV Agusta F4 RC have leaked out onto the internet, along with a slide from MV Agusta’s media presentation on the machine. The photos give us our first glimpse into Varese’s homologation special, complete with a special two-can exhaust by Termignoni. The leaked slide confirms some of the numbers being thrown around about the F4 RC, namely that it will have 212hp, 81.86 lbs•ft of torque, weigh 175kg dry, and cost €36,900 (we already know that the MV Agusta F4 RC will cost $46,000 in the USA). Information from a leaked slide last year has already told us that MV Agusta has radically overhauled the F4 RC’s engine, designing a new cylinder heard, new crankshaft, new camshaft, as well as adding bigger fuel injectors, lighter pistons, and titanium connecting rods.

Kenji Ekuan, Designer of the Yamaha VMAX Has Died

Mainstream news is mourning the death of Kenji Ekuan today, as the 85-year-old Japanese industrial designer is one of the most influential artists in Japan’s modern era, and is most well-known for his designing of the iconic Kikkoman soy sauce bottle. Ekuan’s lesser-known works though include a number of motorcycle designs for Yamaha, including the now 30-year-old Yamaha VMAX motorcycle, which makes his passing even more meaningful to motorcyclists around the world. Kenji Ekuan founded GK Industrial Design after WWII, and his company helped shape the way Japan rebuilt itself after the world war.

Ride Review: KTM 1290 Super Adventure

Despite its huge dimensions, not to mention a 30 liter fuel tank, the 2015 KTM 1290 Super Adventure never looks big or bulky. In fact, it is only when you mount the hard luggage that you can tell this bike can really cover long distances. Apart from a dorky little exposed wire from the heated grips near the throttle, the fit and finish is very high-end, especially the integrated curved lighting in the tank — it is quite a sight. At first glance the Super Adventure doesn’t have the massive personality and stance of its German rival, the BMW R1200GS Adventure, but that is in part due to the white color scheme and the absence of the typical beak as a front mudguard. KTM is going about things differently, and that is something that appeals to many riders…including us.

Yamaha VMAX Carbon – Celebrating 30 Years of VMAX

It is hard to believe that the venerable Yamaha VMAX has been around for 30 years (it is even harder to believe that the VMAX has only seen one design revision in that timeframe as well), and so Yamaha is bringing out a special edition model to celebrate this special motorcycle. The 2015 Yamaha VMAX Carbon is exactly as the name implies: a VMAX drag bike laden with lightweight carbon fiber. In total, the VMAX Carbon’s tank cover, front and rear fenders, and side covers are all made from carbon fiber. Yamaha has teamed up with Akrapovic as well, and as such the Slovenian company’s slip-on mufflers complete the exhaust system and the changes to this beastly drag bike.

LEAKED: Here is the 2016 Indian Chief Dark Horse

Cruisers aren’t really our forté, here at Asphalt & Rubber, but breaking stories is…so, without all the typical fanfare, we bring you the first full photos of the upcoming 2016 Indian Chief Dark Horse. The Stead is murdered out and visually appealing, with black engine covers, black fenders, black forks…hell, even the tires are black. Under the hood is Indian’s Thunder Stroke 111 engine, which is an air-cooled 1,811cc v-twin good for 73hp and 100 lbs•ft.More technical features include ABS as standard, a keyless ignition system, cast wheels, and a solo seat. Our Bothan Spies suggest an MSRP of $17,000, and more accessories (all black, natch) than you can fit into the belly of a Tauntaun. Expect to see the Indian Chief Dark Horse launch officially on February 13th elsewhere.

Washington State Weighs Pro Lane-Splitting Law

The Washington State Legislature has a pro lane-splitting bill on its 2015-2016 docket, HB 1515. The law is moderately written, adopting a 10 mph speed differential between the motorcycle and traffic, with a 35 mph speed cap, as acceptable during lane-splitting activities. Loyal Asphalt & Rubber readers will recognize these provisions as being more restrictive than the California Highway Patrol’s now defunct guidelines. Lane-splitting is a near-and-dear topic to us here at A&R, as we believe a national effort to legalize the practice should be mission #1 for the American Motorcyclist Association.

KTM 390 Duke Also Confirmed for the USA

11/13/2014 @ 2:54 pm, by Jensen Beeler10 COMMENTS

KTM-RC390-01

In addition the KTM RC390, KTM USA has also seen fit to bring the KTM 390 Duke to American soil for the 2015 model year. The absence of the small-displacement street bike on KTM USA’s lineup for the past two year has been a curious one, as the 375cc naked bike has been selling quite well in other markets.

Whatever reasons KTM USA might have for delaying the arrival of the KTM 390 Duke to the United States, the good news is that American riders will have it as an option starting next year. Pricing is set at $4,999, and includes Brembo brakes and WP suspension.

KTM Reconfirms “Faired” and “Travel” Duke 390 Models

12/03/2012 @ 6:57 pm, by Jensen Beeler24 COMMENTS

For some time now, we have known that KTM intended to bring a 300cc-class version of its KTM 125 Duke motorcycle to market, thanks primarily to a leaked product road map that covered the Austrian company’s product line-up clear through the 2014 model year.

Slotted to bring the KTM 390 Duke to the US market this coming spring, the leaked road map has so far proven to be accurate, and has two interesting machines listed for 2014: the KTM Moto3 350 & KTM Enduro 350.

Now confirmed by KTM’s CEO Stefan Pierer, KTM will debut a “faired” model (the KTM Moto3 350) and a “travel” model (KTM Enduro 350), which are based off the KTM 390 Duke platform, and will share the bike’s 375cc single-cylinder engine.

2013 KTM 390 Duke – AYBABTU

11/13/2012 @ 4:48 am, by Jensen Beeler18 COMMENTS

Officially official now, there isn’t much about the 2013 KTM 390 Duke that we don’t already know ahead of the opening of the EICMA show. Built in India by KTM minority shareholder Bajaj, the KTM 390 Duke is a 373cc single-cylinder bike that shares the same chassis as the KTM 125 Duke & KTM 200 Duke.

Suitable for Europe’s A2 licensing system, the largest baby Duke competes well against bikes like the Honda CBR500R and Kawasaki Ninja 300, and thus finishes out the Austrian’s bid to control the small-displacement market.

Report: More Details on the now KTM 390 Duke

10/25/2012 @ 12:17 am, by Jensen Beeler11 COMMENTS

Courtesy of the folks at Zigwheels, details about the KTM 390 Duke (previously of KTM 350 Duke & KTM 375 Duke fame) continue to emerge ahead of the EICMA show in Milan, including what is expected to be the official designation of the small-displacement motorcycle. Coming in a 375cc single-cylinder format, KTM continues its misleading numbering scheme for motorcycles with a “390” designation, though we think you will forgive the Austrian brand, as its American-bound mini-Duke is said to come with 45hp and a 331 lbs curb-weight.

For those keeping score, that means that the KTM 390 Duke will have more power than the Kawasaki Ninja 300, and weigh less than the Honda CBR250R, making it a very formidable package in the small-displacement market. To be made in India by Bajaj (a major stakeholder in KTM’s public stock), the Indian company is expected to make its own version of the model, similar to what it has done with the Pulsar 200NS, which is based off the KTM 200 Duke.

Rumor: KTM 375 Duke – A V-Twin Learner Cometh?

10/17/2012 @ 4:07 pm, by Jensen Beeler12 COMMENTS

Diving through KTM’s 108 page annual report for 2011, the Austrian company lists a couple of interesting developments in its Research & Development section. Partnering with Bajaj on small-displacement street motorcycles, the first obvious fruit of that labor was the KTM 125 Duke, and the subsequent KTM 200 Duke that is available worldwide.

We already know that KTM plans on bringing a 300cc version of the baby Duke to North America, and the Austrian company lists displacements in this project up to 375cc, a strong signal to the final displacement of the much anticipated KTM 350 Duke.