MotoGP Closes Two Crucial Loopholes in Its Rulebook

Heads up GP fans, as the MotoGP Championship is set to close two crucial loopholes in its rulebook for the 2019 season, which the Grand Prix Commission says in its press release are needed in order to keep the sport within the spirit of the rules. The first loophole blandly affects the spec-ECU and its CAN protocol and connection, which is fairly innocuous until you read between the lines of it, while the second concerns the regulation of aerodynamic bodywork, which should be more obvious to regular MotoGP fans.If you will allow us to Tarantino these two rulebook changes, the MotoGP Championship will impose more regulation on aerodynamic bodywork, namely it will remove the loophole that allows manufacturers to change the internal structure of their don’t-call-them-winglets.

Rumors of a New Aprilia RSV4 Begin

This is the 10th year of the Aprilia RSV4 superbike, and despite that duration, the V4 superbike remains one of the top machines that you can stick in your garage. Part of this is due to the fact that the RSV4 is an incredibly well-engineered high-tech motorcycle. After all, it was the first superbike to use an inertial measurement unit (IMU) in conjunction with traction control, and one of the first superbikes to have a ride-by-wire throttle. The other part of Aprilia’s dominance comes down to the fact that the Italian brand has consistently updated the RSV4 every couple of years, helping keep it at the sharp end of the superbike stick. Now if you believe the rumors, the 2019 model year will be no different.

Cameron Beaubier Headed to WorldSBK for 2019?

When you talk to veterans of motorcycle racing about which American could be the next champion at the international level of the sport, one name is almost always included in that very short list: Cameron Beaubier. This is not only because of Beaubier’s status as a two-time MotoAmerica Superbike champion, but also his experience abroad. A promising young rider, Beaubier impressed during the 2007 Red Bull Rookies Cup season, which found him some riders on the international stage before returning to the USA. Now a proven talent on domestic soil, along with his experience abroad, Beaubier is an easy pick to make when looking for Americans to promote to a paddock like the WorldSBK Championship. And now that is exactly the case, with the Cameron Beaubier tipped for ride in World Superbike next season.

More Details on the KTM 790 Adventure R Emerge

The KTM 790 Duke hasn’t even made it to American soil yet — though, it strangely can race in the production middleweight class at Pikes Peak… — and we are already talking about its off-roading sibling, the KTM 790 Adventure R. Built around the same 799cc parallel-twin engine found in the Duke model, the Adventure variant takes things to a whole new level for ADV riders. Promising light weight, plenty of off-road power, and Dakar-inspired chassis components, this should be the adventure-tourer that dual-sport riders have been asking for. With the production version of the KTM 790 Adventure R set to debut later this year at the annual industry trade shows, most of our appetite has been sustained by the prototype bike, which has been making the marketing rounds.

Tom Sykes, Where Will You Be Racing Next Year?

With Jonathan Rea’s future firmly set at the Kawasaki Racing Team, the focus this past weekend at Laguna Seca was on the future of his teammate, Tom Sykes. The Yorkshire man had spared few words in the media for his team and teammate in the days ahead of the California round, and he certainly wasn’t holding too much back once he was at Laguna Seca. You could almost smell the smoke emanating from Sykes, a result of the bridge that was being burned behind him. Sykes is 99.9% not riding with Kawasaki for the 2019 World Superbike Championship season, and he finds himself as one of the top picks in the paddock in the rider market. Chaz Davies is another top rider who is highly sought after in the paddock, and he is likely to remain at Ducati.

Moto2 Builders Out Testing the Triumph Triple

The 2019 Moto2 Championship is rapidly approaching, and next year’s season sees the introduction of a new spec-engine platform. Using a 765cc three-cylinder engine from Triumph, Moto2 competitors have begun testing their new chassis designs for the British triple. Out in Aragon, we get our first glimpse of the front-running race bike providers: Kalex, KTM, and NTS, as well as Triumph’s own test mule, which uses a Daytona 675 chassis. Shaking down their machines ahead of the start of next season, bike manufacturers focused on learning the new race engine and its accompanying spec-ECU. The Kalex was ridden by Moto2 racer Alex Marquez and test rider Jesko Raffin; on the KTM was Julian Simon and test rider Ricky Cardús; and on the NTS was Moto2/MotoGP veteran Alex de Angelis.

Polaris Moving Production to Europe Because of Tariffs?

President Trump’s trade war is about to see another player in the motorcycle industry jump ship from American soil, and this time it is heavyweight Polaris Industries. According to a report by the Minneapolis/St. Paul Business Journal, Polaris is considering moving some of its production capacity to Europe, eyeing a production facility in Poland that would build units for the European market. The move is a direct response to the retaliatory tariffs imposed by the European Union on motorcycle imports, which itself was a response to the Trump Administration’s taxing of steel and aluminum imports.

Here’s Why Suzuki’s New Factory Is Such a Big Deal

One of the more overlooked announcements this week is perhaps one of the bigger ones we have seen in a while, as Suzuki Motor Corp has announced the creation of a new manufacturing plant in Hamamatsu, Japan. The new factory combines engineering, development, engine production, and vehicle assembly into one location, which will streamline operations, increase efficiency, and reduce production costs on Suzuki’s Japanese-made motorcycle models. Over 40 acres in size, the new factory is massive, and it sits in the Miyakoda district of Hamamatsu. Part of a five-year consolidation plan, the new factory replaces an engineering and development facility in Ryuyo; an engine production plant in Takatsuka; and a motorcycle assembly line in Toyokawa.

Take a Look at the Norton Atlas, Another British Scrambler

Today we get another look at Norton’s 650cc project, now named the Norton Atlas. We have already seen concept sketches for this British scrambler, and now Norton is showing us some engineering renders. This is because the physical machine should debut later this year, at the NEC bike show in November. Details are still vague and light, but we do know that the 650cc parallel-twin engine will piggyback off the work done for Norton’s V4 superbike. Essentially the using the V4 engine with its rear cylinders lopped off, the parallel-twin engine shares the same head, pistons, valves, etc as the V4 bike. Several flavors of the Atlas are expected to come to market, with 70hp and 100hp naturally aspirated versions already planned, as well as a supercharged version that is said to clear 175hp.

Limited Edition Celebrates 25 Years of the Ducati Monster

This year marks the 25th year of the Ducati Monster, one of the most iconic motorcycles ever to come out of the Borgo Panigale assembly line. To commemorate this 25-year mark, we have the aptly named Ducati Monster 1200 25° Anniversario. A special edition version of the Italian naked bike, only 500 Anniversario models will be produced for the world’s market, with the highlight being the machine’s tricolore livery and gold frame and wheels. Mostly an aesthetic exercise, the Ducati Monster 1200 25° Anniversario comes with some top-shelf parts, and a number of pieces to make this a unique member of any Ducatisti’s garage. Key features include Öhlins suspension, forged Marchesini wheels, and Ducati’s up/down quickshifter mechanism.

At the beginning of this month, Ducati posted a promo video for its new Panigale V4 superbike. The video shows the new machine testing in a wind tunnel, touting the tagline that the motorcycle was “shaped by the wind.”

Surely this access to a high-speed wind tunnel for development purposes is the byproduct and one of the benefits of Ducati being part of the Volkswagen Group.

Though, computational fluid dynamics (CFD) has all but made wind tunnels obsolete, making such things more of a show of engineering, and thus marketing. We digress.

What is of note though in this video, however, beyond the interesting glimpses of Ducati’s physical fluidic analysis, is that it is a glimpse at one of the Panigale V4’s very early designs.

Continue Reading

Chaz-Davies-BMW-S1000RR-Wind-Tunnel-WSBK-03

BMW Motorrad Goldbet SBK’s Chaz Davies had some homework ahead of this weekend’s World Superbike round in Monza, as the Welshman spent time in BMW’s high-speed wind tunnel to work on his aerodynamics with the BMW S1000RR. With Monza being one of the fastest courses on the WSBK calendar, a rider’s ability to have the optimal body position down the the track’s long sections, where speeds can easily exceed 200 mph, is a crucial element to race-day success.

“It was a really interesting afternoon”, said Davies. “When testing on a track, you try new development parts and different settings but you are not working on your body. So it was great to experience in a stable environment with my riding position, to move myself around on the bike, to have elbows and shoulders in different positions and to then see in the data what difference it makes.

Continue Reading

Photos: BMW S1000RR WSBK Hits the Wind Tunnel

11/16/2010 @ 11:07 am, by Jensen Beeler4 COMMENTS

As the BMW World Superbike team prepares for the 2011 season, Leon Haslam and Troy Corser took a break from their training regiment to spend some time in BMW’s wind tunnel facility in Bavaria. Looking to hone the maximum performance out of the S1000RR, both riders worked on their optimal streamlined body positions in speeds up to 150 mph. The BMW WSBK team also looked at the S1000RR’s fairing, examining how to optimize the bike’s Cx or coefficient of drag (we assume any modifications that were made were WSBK legal of course).

The team will get to test its results later this month in Jerez, and in the meantime Haslam and Corser will be shipped off to a BMW fitness training bootcamp with fellow BMW riders James Toseland and Ayrton Badovini from the BMW Italia squad, along with members of the BMW Enduro team. We don’t like the sound of this training camp, but BMW has given us 12 high-quality shots of the S1000RR in the wind tunnel, which we enjoyed.

Continue Reading

After a lively discussion on fully-faired motorcycles in his original post, including a lengthy post by Craig Vetter, Michael Czysz follows up the discussion by further delving into streamlining, dustbins, and the difference between the two. In his discussion Czysz explains the purpose and benefit of taking aerodynamics into account not only in electric racing but also in ICE applications, and then walks us through its use on the MotoCzysz C1.

The post is a good primer on the exponential force that streamlining tries to overcome, and well worth a read for that purpose. Michael Czysz closes his post with a hint that he’ll have a dustbin at the ready should the field warrant such a fairing, and should his rider Mark Miller feel comfortable using it. Check it all out here.