MotoGP Closes Two Crucial Loopholes in Its Rulebook

Heads up GP fans, as the MotoGP Championship is set to close two crucial loopholes in its rulebook for the 2019 season, which the Grand Prix Commission says in its press release are needed in order to keep the sport within the spirit of the rules. The first loophole blandly affects the spec-ECU and its CAN protocol and connection, which is fairly innocuous until you read between the lines of it, while the second concerns the regulation of aerodynamic bodywork, which should be more obvious to regular MotoGP fans.If you will allow us to Tarantino these two rulebook changes, the MotoGP Championship will impose more regulation on aerodynamic bodywork, namely it will remove the loophole that allows manufacturers to change the internal structure of their don’t-call-them-winglets.

Rumors of a New Aprilia RSV4 Begin

This is the 10th year of the Aprilia RSV4 superbike, and despite that duration, the V4 superbike remains one of the top machines that you can stick in your garage. Part of this is due to the fact that the RSV4 is an incredibly well-engineered high-tech motorcycle. After all, it was the first superbike to use an inertial measurement unit (IMU) in conjunction with traction control, and one of the first superbikes to have a ride-by-wire throttle. The other part of Aprilia’s dominance comes down to the fact that the Italian brand has consistently updated the RSV4 every couple of years, helping keep it at the sharp end of the superbike stick. Now if you believe the rumors, the 2019 model year will be no different.

Cameron Beaubier Headed to WorldSBK for 2019?

When you talk to veterans of motorcycle racing about which American could be the next champion at the international level of the sport, one name is almost always included in that very short list: Cameron Beaubier. This is not only because of Beaubier’s status as a two-time MotoAmerica Superbike champion, but also his experience abroad. A promising young rider, Beaubier impressed during the 2007 Red Bull Rookies Cup season, which found him some riders on the international stage before returning to the USA. Now a proven talent on domestic soil, along with his experience abroad, Beaubier is an easy pick to make when looking for Americans to promote to a paddock like the WorldSBK Championship. And now that is exactly the case, with the Cameron Beaubier tipped for ride in World Superbike next season.

More Details on the KTM 790 Adventure R Emerge

The KTM 790 Duke hasn’t even made it to American soil yet — though, it strangely can race in the production middleweight class at Pikes Peak… — and we are already talking about its off-roading sibling, the KTM 790 Adventure R. Built around the same 799cc parallel-twin engine found in the Duke model, the Adventure variant takes things to a whole new level for ADV riders. Promising light weight, plenty of off-road power, and Dakar-inspired chassis components, this should be the adventure-tourer that dual-sport riders have been asking for. With the production version of the KTM 790 Adventure R set to debut later this year at the annual industry trade shows, most of our appetite has been sustained by the prototype bike, which has been making the marketing rounds.

Tom Sykes, Where Will You Be Racing Next Year?

With Jonathan Rea’s future firmly set at the Kawasaki Racing Team, the focus this past weekend at Laguna Seca was on the future of his teammate, Tom Sykes. The Yorkshire man had spared few words in the media for his team and teammate in the days ahead of the California round, and he certainly wasn’t holding too much back once he was at Laguna Seca. You could almost smell the smoke emanating from Sykes, a result of the bridge that was being burned behind him. Sykes is 99.9% not riding with Kawasaki for the 2019 World Superbike Championship season, and he finds himself as one of the top picks in the paddock in the rider market. Chaz Davies is another top rider who is highly sought after in the paddock, and he is likely to remain at Ducati.

Moto2 Builders Out Testing the Triumph Triple

The 2019 Moto2 Championship is rapidly approaching, and next year’s season sees the introduction of a new spec-engine platform. Using a 765cc three-cylinder engine from Triumph, Moto2 competitors have begun testing their new chassis designs for the British triple. Out in Aragon, we get our first glimpse of the front-running race bike providers: Kalex, KTM, and NTS, as well as Triumph’s own test mule, which uses a Daytona 675 chassis. Shaking down their machines ahead of the start of next season, bike manufacturers focused on learning the new race engine and its accompanying spec-ECU. The Kalex was ridden by Moto2 racer Alex Marquez and test rider Jesko Raffin; on the KTM was Julian Simon and test rider Ricky Cardús; and on the NTS was Moto2/MotoGP veteran Alex de Angelis.

Polaris Moving Production to Europe Because of Tariffs?

President Trump’s trade war is about to see another player in the motorcycle industry jump ship from American soil, and this time it is heavyweight Polaris Industries. According to a report by the Minneapolis/St. Paul Business Journal, Polaris is considering moving some of its production capacity to Europe, eyeing a production facility in Poland that would build units for the European market. The move is a direct response to the retaliatory tariffs imposed by the European Union on motorcycle imports, which itself was a response to the Trump Administration’s taxing of steel and aluminum imports.

Here’s Why Suzuki’s New Factory Is Such a Big Deal

One of the more overlooked announcements this week is perhaps one of the bigger ones we have seen in a while, as Suzuki Motor Corp has announced the creation of a new manufacturing plant in Hamamatsu, Japan. The new factory combines engineering, development, engine production, and vehicle assembly into one location, which will streamline operations, increase efficiency, and reduce production costs on Suzuki’s Japanese-made motorcycle models. Over 40 acres in size, the new factory is massive, and it sits in the Miyakoda district of Hamamatsu. Part of a five-year consolidation plan, the new factory replaces an engineering and development facility in Ryuyo; an engine production plant in Takatsuka; and a motorcycle assembly line in Toyokawa.

Take a Look at the Norton Atlas, Another British Scrambler

Today we get another look at Norton’s 650cc project, now named the Norton Atlas. We have already seen concept sketches for this British scrambler, and now Norton is showing us some engineering renders. This is because the physical machine should debut later this year, at the NEC bike show in November. Details are still vague and light, but we do know that the 650cc parallel-twin engine will piggyback off the work done for Norton’s V4 superbike. Essentially the using the V4 engine with its rear cylinders lopped off, the parallel-twin engine shares the same head, pistons, valves, etc as the V4 bike. Several flavors of the Atlas are expected to come to market, with 70hp and 100hp naturally aspirated versions already planned, as well as a supercharged version that is said to clear 175hp.

Limited Edition Celebrates 25 Years of the Ducati Monster

This year marks the 25th year of the Ducati Monster, one of the most iconic motorcycles ever to come out of the Borgo Panigale assembly line. To commemorate this 25-year mark, we have the aptly named Ducati Monster 1200 25° Anniversario. A special edition version of the Italian naked bike, only 500 Anniversario models will be produced for the world’s market, with the highlight being the machine’s tricolore livery and gold frame and wheels. Mostly an aesthetic exercise, the Ducati Monster 1200 25° Anniversario comes with some top-shelf parts, and a number of pieces to make this a unique member of any Ducatisti’s garage. Key features include Öhlins suspension, forged Marchesini wheels, and Ducati’s up/down quickshifter mechanism.

History was made in the FIM World Supersport 300 class this weekend in Portugal, as Ana Carrasco became the first woman ever to win a World Championship (solo) race.

Her victory didn’t come easy though, as three riders had a hand on the winner’s trophy, as they came down the front straight away for the final time.

Expertly gauging the draft to the finish line, Ana Carrasco put herself in front of Alfonoso Coppola (+0.053) and Marc Garcia (+0.062), narrowly beating the two Yamaha YZF-R3 riders with her Kawasaki Ninja 300.

Continue Reading

2014-KTM-RC390-white-02

The FIM and Dorna have agreed on a new entry class for the World Superbike championship. A Supersport 300 series has been created to house the burgeoning market of lightweight sports machines, such as the Yamaha YZF-R3 and the KTM RC390.

The concept for the class came about after consultation with manufacturers. Motorcycle manufacturers have seen sales of 600cc supersports bikes plummeting, while sales of lightweight machines have been booming.

More and more manufacturers have been entering the class, though each with slightly different machines and different engine capacities.

Continue Reading

Kawasaki ZX3-RR Concept by ICON

08/22/2014 @ 6:00 am, by Jensen Beeler20 COMMENTS

Kawasaki-ZX-3RR-Concept-Icon-Motorsports-04

Icon might not be the first brand you think of when you talk about road racing apparel, but the Oregonian company is certainly trying to evolve from its Stunt Life roots, into other aspects of two-wheeled culture.

Pushing into the more lifestyle, adventure, and sport segments of the industry, we have already seen Icon’s penchant for concept bikes, which I can atest haven’t really resonated with our sport-bike focused readers. I think today will be a little different though.

Teaming up with Kawasaki, Icon has built what it calls the Kawasaki ZX3-RR concept. Based off the Kawasaki Ninja 300, the Kawasaki ZX3-RR sees new bodywork and a slew of performance parts added to make a spec-series cup bike for young riders. It looks the business.

Continue Reading

Masafumi Nakagawa Named Kawasaki USA President

02/24/2014 @ 1:31 pm, by Bryan Delohery1 COMMENT

kawasaki-logo

According to a press release issued by Kawasaki Motors Corporation U.S.A. (KMC), Effective April 1st, Masafumi Nakagawa will be assuming the position of company President, replacing Takeshi Teranishi, as he takes command of KMC Japan.

Continue Reading

Happy 30th Birthday to the Kawasaki Ninja

02/12/2014 @ 12:19 pm, by Jensen Beeler11 COMMENTS

kawasaki-ninja-30-years

The Kawasaki Ninja line began life with the Kawasaki GPZ900R (the Ninja 900 to its friends) in 1984. Now 30 years later, Kawasaki is celebrating three decades of Ninja motorcycles, a model name that has become synonymous with the sport bike segment.

While the Ninja 900 began as Maverick’s daily ride in the movie Top Gun, the model sparked what would later become the superbike wars amongst the Japanese manufacturers.

The Ninja name has grown in time to become the Ninja ZX-10R superbike, refined itself to become the Ninja ZX-14R sport-tourer, and also grown into the small-displacement offerings of the Ninja 250R and Ninja 300, with many models in between.

A Ninja also just recently won the World Superbike Championship — not bad for a Gen-Xer. So we bid Happy Birthday to the Ninja, and hope for another 30 years of awesome green bikes with the Ninja name emblazoned upon them. Got a story about your Ninja? Leave it in the comments.

Continue Reading

kawasaki-250cc-single-cylinder

According to TMCBlog (more photos on their site), Kawasaki may be planning to release a new entry level sport bike as a cost effective option for the Southeast Asian market. Rumor has it that this 250cc, single-cylinder bike is under construction and would be the more economical cousin to the Kawasaki Ninja 300 and its parallel-twin engine, while providing more competition for the Honda CBR250R.

While none of this can be confirmed, for time being it is a safe bet that if Kawasaki wants to remain competitive in its Asian markets, and it would be a good business strategy for Kawasaki to produce a bike that is comparable to many of the other single-cylinder bikes in the region, which are being produced by Honda, Suzuki, and KTM.

Continue Reading

Recall: 2013 Kawasaki Ninja 300

08/12/2013 @ 3:53 pm, by Jensen Beeler3 COMMENTS

2013-Kawasaki-Ninja-300

It would seem that even the popular Kawasaki Ninja 300 isn’t immune from the plethora of recalls we have seen the past few weeks, as Kawasaki Motors Corporation is recalling certain 2013 Kawasaki Ninja 300 and 2013 Kawasaki Ninja 300 ABS motorcycles manufactured between July 16, 2012 and April 27, 2013.

Continue Reading

Nissin-anti-lock-brakes

A wave of recalls are reaching the shores of motorcycle manufacturers, as brake maker Nissin has had to recall a number of its ABS units for a misaligned inlet valve, which could allow foregin particles into the fluid of the braking system, which could cause the ABS functionality to fail.

Triumph first discovered the defect, and reported it to Nissin, which in-turn notified its other affected OEMs. So far  5,766 motorcycles have been affected by the recall, comprising a total of four manufacturers (a list of the models is after the jump, with a link to the appropriate NHTSA posting). We will update this list if/when more model recalls are announced.

Continue Reading

There is not much that we don’t already know about the 2013 Kawasaki Ninja 300. It looks pretty much exactly like the re-designed 2013 Kawasaki Ninja 250R that broke cover in Indonesia earlier this year. The EPA already spilled the beans on the Kawasaki Ninja 300’s 296cc displacement and 40hp, and we know that the Ninja 300 is the peppier fuel-injected cousin to America’s dreadfully under-developed Ninja 250R…and now we know that the bike will come to the American market for next year.

Tipping the scales at the curb with 387 lbs, with its 4.5 gallons of fuel, the Kawasaki Ninja 300 isn’t a featherweight, but it isn’t a slouch either. In fact, when it comes to a sporty learner-class motorcycle for the American market, the Kawasaki Ninja 300 may very well be the bike of choice.

In a category where prospective buyers are raiding the couch cushions for a down payment, price is king. And with its $4,799 starting MSRP, the Ninja 300 is an expensive option, but is it still a bargain?

Continue Reading

Confirming what we already knew, the 2013 Kawasaki Ninja 300 broke cover today, and is Team Green’s newest small-displacement sport bike in its motorcycle lineup. 296cc’s of twin-cylinder fury, Kawasaki the Ninja 300 boasts 40hp, twin-butterfly valves, fuel injection, a slipper clutch, a 140mm rear tire, and has optional ABS. A part of a larger movement within Kawasaki, the Ninja 300 exemplifies the “no replacement for displacement” school of thought, and will sell along-side the recently updated (and virtually visually identical) Kawasaki Ninja 250R in more than a few markets.

While we know that the 2013 Kawasaki Ninja 300 is set to debut for our European readers, the big question mark will be whether the small sport bike will come to the North American markets. A spreadsheet from the EPA seems to suggest that will be the case, though it points to a carbureted Kawasaki Ninja 205R and fuel-injected Kawasaki Ninja 400R coming to the US as well, making for one impacted learner-bike market. Meanwhile, reports from Canada confirm that their 250R will also be of the carbureted variety.

The news confirms out suspicion that the Ninja 250R will remain the under-powered, and standard-styled, carbureted learner-bike it has always been in North America, while the Ninja 300 becomes the peppy small-displacement sport bike that we haven’t realized that we will lust over later this fall. Presumably then, the Kawasaki Ninja 300 will go head-to-head with the CBR250R and upcoming KTM Moto3-inspired street bike, among other models.

Continue Reading