MotoGP Closes Two Crucial Loopholes in Its Rulebook

Heads up GP fans, as the MotoGP Championship is set to close two crucial loopholes in its rulebook for the 2019 season, which the Grand Prix Commission says in its press release are needed in order to keep the sport within the spirit of the rules. The first loophole blandly affects the spec-ECU and its CAN protocol and connection, which is fairly innocuous until you read between the lines of it, while the second concerns the regulation of aerodynamic bodywork, which should be more obvious to regular MotoGP fans.If you will allow us to Tarantino these two rulebook changes, the MotoGP Championship will impose more regulation on aerodynamic bodywork, namely it will remove the loophole that allows manufacturers to change the internal structure of their don’t-call-them-winglets.

Rumors of a New Aprilia RSV4 Begin

This is the 10th year of the Aprilia RSV4 superbike, and despite that duration, the V4 superbike remains one of the top machines that you can stick in your garage. Part of this is due to the fact that the RSV4 is an incredibly well-engineered high-tech motorcycle. After all, it was the first superbike to use an inertial measurement unit (IMU) in conjunction with traction control, and one of the first superbikes to have a ride-by-wire throttle. The other part of Aprilia’s dominance comes down to the fact that the Italian brand has consistently updated the RSV4 every couple of years, helping keep it at the sharp end of the superbike stick. Now if you believe the rumors, the 2019 model year will be no different.

Cameron Beaubier Headed to WorldSBK for 2019?

When you talk to veterans of motorcycle racing about which American could be the next champion at the international level of the sport, one name is almost always included in that very short list: Cameron Beaubier. This is not only because of Beaubier’s status as a two-time MotoAmerica Superbike champion, but also his experience abroad. A promising young rider, Beaubier impressed during the 2007 Red Bull Rookies Cup season, which found him some riders on the international stage before returning to the USA. Now a proven talent on domestic soil, along with his experience abroad, Beaubier is an easy pick to make when looking for Americans to promote to a paddock like the WorldSBK Championship. And now that is exactly the case, with the Cameron Beaubier tipped for ride in World Superbike next season.

More Details on the KTM 790 Adventure R Emerge

The KTM 790 Duke hasn’t even made it to American soil yet — though, it strangely can race in the production middleweight class at Pikes Peak… — and we are already talking about its off-roading sibling, the KTM 790 Adventure R. Built around the same 799cc parallel-twin engine found in the Duke model, the Adventure variant takes things to a whole new level for ADV riders. Promising light weight, plenty of off-road power, and Dakar-inspired chassis components, this should be the adventure-tourer that dual-sport riders have been asking for. With the production version of the KTM 790 Adventure R set to debut later this year at the annual industry trade shows, most of our appetite has been sustained by the prototype bike, which has been making the marketing rounds.

Tom Sykes, Where Will You Be Racing Next Year?

With Jonathan Rea’s future firmly set at the Kawasaki Racing Team, the focus this past weekend at Laguna Seca was on the future of his teammate, Tom Sykes. The Yorkshire man had spared few words in the media for his team and teammate in the days ahead of the California round, and he certainly wasn’t holding too much back once he was at Laguna Seca. You could almost smell the smoke emanating from Sykes, a result of the bridge that was being burned behind him. Sykes is 99.9% not riding with Kawasaki for the 2019 World Superbike Championship season, and he finds himself as one of the top picks in the paddock in the rider market. Chaz Davies is another top rider who is highly sought after in the paddock, and he is likely to remain at Ducati.

Moto2 Builders Out Testing the Triumph Triple

The 2019 Moto2 Championship is rapidly approaching, and next year’s season sees the introduction of a new spec-engine platform. Using a 765cc three-cylinder engine from Triumph, Moto2 competitors have begun testing their new chassis designs for the British triple. Out in Aragon, we get our first glimpse of the front-running race bike providers: Kalex, KTM, and NTS, as well as Triumph’s own test mule, which uses a Daytona 675 chassis. Shaking down their machines ahead of the start of next season, bike manufacturers focused on learning the new race engine and its accompanying spec-ECU. The Kalex was ridden by Moto2 racer Alex Marquez and test rider Jesko Raffin; on the KTM was Julian Simon and test rider Ricky Cardús; and on the NTS was Moto2/MotoGP veteran Alex de Angelis.

Polaris Moving Production to Europe Because of Tariffs?

President Trump’s trade war is about to see another player in the motorcycle industry jump ship from American soil, and this time it is heavyweight Polaris Industries. According to a report by the Minneapolis/St. Paul Business Journal, Polaris is considering moving some of its production capacity to Europe, eyeing a production facility in Poland that would build units for the European market. The move is a direct response to the retaliatory tariffs imposed by the European Union on motorcycle imports, which itself was a response to the Trump Administration’s taxing of steel and aluminum imports.

Here’s Why Suzuki’s New Factory Is Such a Big Deal

One of the more overlooked announcements this week is perhaps one of the bigger ones we have seen in a while, as Suzuki Motor Corp has announced the creation of a new manufacturing plant in Hamamatsu, Japan. The new factory combines engineering, development, engine production, and vehicle assembly into one location, which will streamline operations, increase efficiency, and reduce production costs on Suzuki’s Japanese-made motorcycle models. Over 40 acres in size, the new factory is massive, and it sits in the Miyakoda district of Hamamatsu. Part of a five-year consolidation plan, the new factory replaces an engineering and development facility in Ryuyo; an engine production plant in Takatsuka; and a motorcycle assembly line in Toyokawa.

Take a Look at the Norton Atlas, Another British Scrambler

Today we get another look at Norton’s 650cc project, now named the Norton Atlas. We have already seen concept sketches for this British scrambler, and now Norton is showing us some engineering renders. This is because the physical machine should debut later this year, at the NEC bike show in November. Details are still vague and light, but we do know that the 650cc parallel-twin engine will piggyback off the work done for Norton’s V4 superbike. Essentially the using the V4 engine with its rear cylinders lopped off, the parallel-twin engine shares the same head, pistons, valves, etc as the V4 bike. Several flavors of the Atlas are expected to come to market, with 70hp and 100hp naturally aspirated versions already planned, as well as a supercharged version that is said to clear 175hp.

Limited Edition Celebrates 25 Years of the Ducati Monster

This year marks the 25th year of the Ducati Monster, one of the most iconic motorcycles ever to come out of the Borgo Panigale assembly line. To commemorate this 25-year mark, we have the aptly named Ducati Monster 1200 25° Anniversario. A special edition version of the Italian naked bike, only 500 Anniversario models will be produced for the world’s market, with the highlight being the machine’s tricolore livery and gold frame and wheels. Mostly an aesthetic exercise, the Ducati Monster 1200 25° Anniversario comes with some top-shelf parts, and a number of pieces to make this a unique member of any Ducatisti’s garage. Key features include Öhlins suspension, forged Marchesini wheels, and Ducati’s up/down quickshifter mechanism.

This Week’s Honda V4 Superbike Rumor

05/09/2018 @ 4:17 pm, by Jensen BeelerADD COMMENTS

I have to admit, this rumor is more than a week old, as Japanese magazine Young Machine breathed new life into the Honda V4 superbike rumor mill about a month ago.

And of course, the reality is that this rumor is much, much older than this tiny fraction of time.

If you know your motorcycle news history, talk of a Honda V4 replacement for the CBR1000RR line has existed for almost two decades now…but hey, a broken clock is correct twice a day, right?

So what is new from the Land of the Rising sun that we haven’t heard before? The big eye-catching component to this story is that Honda has/had a two-stage upgrade path for the CBR1000RR, of which we are about to see the second phase.

Continue Reading

Return of the Honda V4 Superbike Rumor

12/06/2017 @ 2:13 pm, by Jensen BeelerADD COMMENTS

Call it the rumor the refuses to quit. I say this because there has been some form of “Honda V4 Superbike Coming Soon” speculation in the mix for about as long as I can remember.

Mind you, this is something that has been in the ether well before Asphalt & Rubber took form, and news of a Honda V4 superbike seems to pop-up just about every year, usually fuel by some “inside source” at Honda being quoted by a European magazine.

So, it seemed that the debut of the Honda RC213V-S would finally satiate this desire for a proper V4 liter-bike, but the disappoint of the “new” Honda CBR1000RR re-ignited the interest in there being a worthy successor of the Honda RC45.

Since then, there have been rumors and promises of a more affordable version of the Honda RC213V-S offered on the alter of moto-journalism, usually by the same offending sources. If only we could will this story to be true.

Cropping up yet again, this bout of the V4 rumor finds its beginnings in Japan now, with the popular Japanese publication Young Machine, tipping the idea.

Continue Reading

A Honda RVF1000 V4 Superbike for 2019?

02/23/2017 @ 7:04 pm, by Jensen Beeler52 COMMENTS

Since before I started Asphalt & Rubber, the scribe’s at MCN have been predicting a MotoGP-derived V4 superbike from Honda – I think the original rumor started with a V5 power plant, if that gives you an idea of how long this story has been making the circuit.

The hands on the clock are finally starting to meet with reality though, and the British magazine now says that a more affordable version of the Honda RC213V-S could hit dealerships in time for the 2019 model year.

This information echoes similar news that we saw before the launch of the updated Honda CBR1000RR – that Honda was working in parallel on a new Fireblade as well as a V4 superbike project.

Though now, MCN now points to recent patents filed by Honda, as well as sourced information that the bike is a couple model years away.

Continue Reading

Honda-TT-Legends-CBR1000RR

It’s the worst kept secret in the motorcycle industry right now, Honda is finally updating its superbike offering for the 2017 model year – replacing the now extremely long-in-the-tooth Honda CBR1000RR.

The interesting part of that news of course is whether that new superbike will go by the name CBR or RVF, as there is a bit of a debate regarding what kind of engine will power the Honda.

Despite whether it is an inline-four machine like the CBR1000RR, or a V4-powered beast like Honda’s MotoGP bike, the new superbike will have big shoes to fill.

Continue Reading

Here We Go Again, Honda V4 Superbike Rumors Abound

12/10/2015 @ 2:05 pm, by Jensen Beeler31 COMMENTS

RC213V-S

For the past decade or so, we have been promised a V4 superbike from Honda – one that’s been based off the Japanese manufacturer’s MotoGP program. The Honda RC213V-S is perhaps our closest realization of that promise, though the $184,000 price tag was considerably more than many envisioned.

Now the rumors are rife again, with a V4-powered superbike said to be coming our way for the 2017 model year, in parallel of course with a new inline-four powered CBR1000RR as well.

Like the rumors of old, this current excitement comes from the insatiably minds at MCN, and while there is certainly evidence for the rumor, when you drill down into the facts, Honda’s plan is far from certain.

Continue Reading