Up-Close with the Krämer HKR EVO2 R

If I said that there was an 81hp track bike that weighed less than 280 lbs ready to race, would that be something you’d be interested in? If so, say hello to the Krämer HKR EVO2, a purpose-built track bike from Germany. Built around KTM’s 690cc single-cylinder engine, which is found in KTM 690 Duke and Husqvarna’s 701 series of bikes, the Krämer HKR EVO2 features a bespoke steel-trellis chassis, custom bodywork, and a host of top-shelf components. The real tasty part about the Krämer HKR EVO2 though is the attention to detail and the purposefulness of its design – take for instance the 12-liter XPE plastic fuel tank that doubles as a subframe, which has integrated crash sliders, and a sighting hole for easy adjustment of the rear shock damping.

Motorcycle Sales in Europe Show Strong Growth

Motorcycle sales in the United States might be tanking, but things are looking fairly positive across the pond in Europe, as the ACEM reports a 4.7% increase in motorcycle sales for Q1 2018, for a total of 203,853 units sold in the first three months of this year. The increase in sales is due to key markets like France (+9.1%), Germany (+1.9%), and the UK (+7.4%) showing good growth, compared to Q1 2017. However, not all the European countries are showing increases in motorcycle sales, with the Czech Republic (-17.3%), Poland (-28.7%), and Austria (-18.9%) pulling the sales growth figure down considerably. Not all segments are growing too. While the big bikes are seeing sales increases, European sales for mopeds are down considerably for Q1 2018 (40.2%), to the tune of a 24,996 unit sales decline over last year.

This Week’s Honda V4 Superbike Rumor

I have to admit, this rumor is more than a week old, as Japanese magazine Young Machine breathed new life into the Honda V4 superbike rumor mill about a month ago. And of course, the reality is that this rumor is much, much older than this tiny fraction of time. If you know your motorcycle news history, talk of a Honda V4 replacement for the CBR1000RR line has existed for almost two decades now…but hey, a broken clock is correct twice a day, right? So what is new from the Land of the Rising sun that we haven’t heard before? The big eye-catching component to this story is that Honda has/had a two-stage upgrade path for the CBR1000RR, of which we are about to see the second phase.

Official: Alta Motors Racing at the 2018 Erzberg Rodeo

We broke the story yesterday, but today the news is officially official: Alta Motors will race in the 2018 Ezerberg Rodeo, which is part of the Red Bull Hard Enduro series. The most grueling and difficult single-day event in motorcycle racing, the Erzberg Rodeo sees 1,500 entires whittled down into what is usually a single-digit summation of race-finishers – and not every year sees a racer cross the finish line – that’s how tough this race is. Racing for Alta Motors will be Ty Tremaine and Lyndon Poskitt, two riders with a lot of off-road experience. For those who don’t recognize those names, Tremaine is currently racing with Alta in the 2018 AMA EnduroCross series, meanwhile Poskitt has previously competed in a number of enduro events, including the Ezberg Rodeo, and most notably just soloed the 2018 Dakar Rally to completion. 

Come Drool Over SERT’s All New Endurance Race Bike

The winningest team in the FIM Endurance World Championship, the Suzuki Endurance Racing Team is the standard by which other endurance teams are measured…and that is a measuring stick that has seen a lot of use in recent seasons. This is because the FIM EWC is a hot bed for competition right now, with a bevy of factory-backed teams capable of winning on any race weekend. This has made it tough for SERT, and its riders Vincent Philippe, Etienne Masson, and Gregg Black, who currently sit sixth in the 2018 FIM Endurance World Championship standings. For this season, SERT hopes that a new racing platform will make the difference, as the French team has finally jumped onboard with the current-generation Suzuki GSX-R1000.

Johann Zarco Signs Two-Year Deal with KTM

One of the biggest dominoes of the 2018 MotoGP Silly Season has just fallen into place. Today, KTM announced that they have signed Johann Zarco to a two-year contract for the 2019 and 2020 seasons. That Zarco would leave the Monster Yamaha Tech3 squad had been widely anticipated, the only question being which factory team he would end up in. The Frenchman was an extremely hot property, after displaying blistering speed on the satellite Yamaha M1 in 2017. Zarco had offers from Suzuki, Repsol Honda, and KTM, though only Honda and KTM were in the frame for the Frenchman. Zarco and his management were still unhappy with the way Suzuki had treated the Frenchman, after the Japanese factory failed to honor a pre-contract Zarco had signed ahead of the 2017 season, choosing Alex Rins instead.

The Ducati Panigale V4 Gets Its First Two Recalls

New model teething issues are always a reality, and it seems that the Ducati Panigale V4 is no exception to the rule. Finding not one, but two issues with the Panigale V4’s fueling system, Italy’s newest superbike is being recalled in the United States. Both recalls seem to affect the full-lot of Panigale V4 models that have made it to US soil thus far this year, which means 692 units (base, S, and Special trim levels) are being recalled for two issues related to the bike’s fuel system. As such, the first recall centers around the breathing system valve plug on the Panigale V4, which might have a fuel leak if the O-ring was damaged during production. Accordingly, the second recall involves the fuel tank cap, which can spray gas when opened, because again of breathing issues within the fuel system.

Are BMW’s Heritage Models Finally Done?

Has BMW Motorrad called it quits for its heritage lineup of motorcycles? That is the rumor at least, and there is some good evidence to support the notion. This is because buried on the 60th turn of BMW’s 260-page annual report for 2017 is the headline: “R nineT family now complete” – a nod that the German brand’s lineup of air-cooled retro-styled motorcycles has reached its zenith and logical conclusion. That makes sense, since there isn’t really a category left of the R nineT family to explore. It has a roadster, a standard, a scrambler, an adventure bike, and a café racer model all in the lineup. No hipster stone has been left unturned. The post-authentic styling trend is over. It’s dead. BMW called it, right? Well…Not so fast.

Up-Close with the 2018 Aprilia RSV4 RF LE

At the Grand Prix of the Americas, Aprilia USA debuted a special new superbike for the 2018 model year, the Aprilia RSV4 RF LE. Limited to only 125 units for North America (100 for the USA, 25 for Canada), the big feature of the 2018 Aprilia RSV4 RF LE is the bike’s fairing winglets, which draw from Aprilia Racing’s aerodynamic progress in the MotoGP Championship. Getting a chance to see the new Aprilia RSV4 RF LE in the flesh while in Texas, we grabbed some up-close photos of this limited edition RSV4, for your viewing pleasure, along with some other details. Aprilia’s wings are an interesting development, and a brave new world for production superbike design. For its part too, it seems that Aprilia isn’t quite sure what to make of the development as well, offering us two narratives for the winglets.

BMW Shows Off 3D Printed BMW S1000RR Frame

Ultimately, I think we are going to come back to this story several times over the next few weeks, as there is so much going on here, from such a simple thing, that one story just won’t do it all justice. To start things off though, let’s look at the basics…as the BMW Group recently hosted what it called the BMW Group Digital Day 2018, which was basically a showcase for all the cool technologies that the Bavarians are using to create a digital frontier that will reshape the human condition. Most of the technology concerns BMW’s automotive business, but there was one little tidbit that could be of interest for motorcycle fans: the 3D printed frame for a BMW S1000RR superbike. Built using additive manufacturing technology, a chassis is created a computer file and metal dust.

2014-Honda-CBR300R-20

Honda has issued a sizable recall for 11,424 motorcycles, which pertains to the Honda CBR300R and Honda CB300F motorcycles for the 2015 and 2016 model years. The recall stems from a the bikes’ crankshafts, which may have been machined improperly, and as a result could cause the rod bearing to fail.

Since a rod bearing failure could potentially stall the engine, a recall was filed with the National Highway Traffic Safety Administration (NHTSA).

So far, Honda has only found 41 affected motorcycles, with zero injuries reported. Honda dealers were notified in July to stop sales of the CBR300R & CB300F until recall work could be completed.

Continue Reading

Honda Recalls Over 45,000 Motorcycles

07/29/2015 @ 2:38 pm, by Jensen Beeler2 COMMENTS

2014-Honda-CBR300R-19

American Honda is recalling a slew of motorcycles for a faulty starter relay switch. The recall affects over 45,000 units made between 2013 and 2016. The affected models are the CB500, CBR500, CRF250L, CBR650, CTX700, NSS300, VT750, VT1300, 2015 CB300F, CBR300, CBR600, and NC700.

On the affected motorcycles, a sealant may have been incorrectly applied to the starter relay switch, and as a result the electrical system can suffer from a loss of power. This can cause the engine to stall, and the motorcycle to crash, so a recall is in order.

Continue Reading

2015-honda-cb300f

We first caught wind of the 2015 Honda CB300F back in March, and at the time we didn’t expect to see the naked small-displacement machine until the autumn trade shows. Well, Honda has proven itself full of surprises, because not only has Big Red debuted the Honda CB300F to the world, but American Honda has also confirmed the model for the United States.

Basically a Honda CBR300R without all of its fairings, the Honda CB300F offers a more upright sitting position, and a little bit less racer flair. At the heart of the CB300F is the same fuel-injected 286cc single-cylinder thumper, which has a longer 8mm stroke than the venerable Honda CBR250R, and thus accounts for its 37cc advantage in displacement.

Perhaps the best part about the 2015 Honda CB300F though is the price tag, which is downright affordable at $3,999 MSRP ($400 less than the CBR300R).

American Honda hasn’t locked down a delivery date for the USA, simply saying that the new model will be hitting Honda dealers in the fall of this year. From what we understand, that’s when you can expect to see the Honda CBR300R as well.

Continue Reading

honda-cb300f-cb250f-trademark-04

Just last week, Yamaha’s US trademark filings tipped off a possible three-cylinder sport-tourer from the Japanese OEM, and in that article we noted how intellectual property filings are becoming an important element in spotting new models from motorcycle manufacturers.

The irony of course is that patents and trademarks are designed to protect the intellectual property of applicants; but in our case, they often give notice to things OEMs would like to keep secret. Such is the case with what we believe is the Honda CB300F, a single-cylinder naked bike that is based off the Honda CBR300R small-displacement sport bike.

Continue Reading